Enclosed cab with heat and air conditioning, backfill blade, manual coupler, hydraulic thumb, 18” wide rubber tracks in very good condition (80%) plus, pivot swing. Inside cab clean with all controls functioning properly. 1,039 hours we believe to be accurate. The machine came from a local company that handled bulk materials on the waterfront. The metal had moderate rust on the sheet metal and a little more severe rust on the blade, bucket, & thumb. We believe the rubber tracks are the original tracks that came from the factory. The engine starts easily and burns clean exhaust. The hydraulics are strong, responsive, and leak free. The final drives are leak free and have no abnormal noises. Limited use machine that came from a bad Neighborhood.
The Cat 308E2 offers a spacious operator environment with ample ingress and egress room and generous leg room. All the E Series models are equipped with a digital control panel that is specially designed for Cat mini excavators - COMPASS - Complete Operation, Maintenance, Performance, and Security System. Built into the COMPASS monitor are an anti-theft system, which requires a five-digit alphanumeric password to start the machine, and an Economy Mode feature that can lower fuel use by up to 20 percent. An automatic engine-idle system drops engine rpm to idle after 4 seconds of inactivity.
Bucket
Maximum Bucket Capacity
1.1 cu yd ( 1 cu m )
Minimum Bucket Capacity
0.5 cu yd ( 0 cu m )
Engine
Aspiration
Turbocharged
Bore
3.7 in ( 9 cm )
Displacement
203.2 cu in ( 3,330 cu cm )
Emissions
Meets U.S. EPA Tier 4 Final and EU Stage IIIB emission standards.