List Your Equipment For Free  /  Seller Login
This machine has been sold or is not currently for sale.

Caterpillar 120M2



MACHINE SOLD


Gregory Poole CAT



Contact: McCrea Wallace

Click for Phone Number

Machine Info:

Hours:5379
Serial Number:M9C00665
Machine Location:RALEIGH, NC
More Information:https://catused.com/cu/10119927

Description:

14' MOLDBOARD, AIR CONDITIONER, AIR SUSPENSION SEAT, AM FM RADIO, Defroster Fan, DIFFERENTIAL LOCK, Drive - Tandem, EROPS, JOYSTICK STEERING, LIGHTING, MIRRORS, Online Owner's Manual , PRODUCT LINK, REARVIEW CAMERA, SCARIFIER, Scarifier, Steering Type - Joystick, Throttle Lock, ULTRA LOW SULFUR DIESEL FUEL, VHP PLUS

Machine Details:

GENERAL APPEARANCE
Cleaning RequiredNo
S.O.S. TakenYes
SAFETY ITEMS
ROPSYes
OPERATOR STATION
Current O&MMYes
Current Parts ManualYes
Current Safety ManualYes
ENGINE
Blow ByNo
Compression in RadiatorNo
Fluid Levels OK?Yes
KnockingNo
Oil LeaksNo
Water in OilNo
COOLING SYSTEM
Water in OilOverall good
ELECTRICAL, STARTING AND CHARGING SYSTEM
Signal LightsYes
TRANSMISSION
Leaks - TRANSMISSIONNo
Transmission - NoisyNo
STEERING
Transmission - NoisyOverall good
BRAKE
Transmission - NoisyOverall good
DRIVECHAIN / TANDEMS
Wheel Lugs & RimsGood
HYDRAULICS
Leaks - HYDRAULICSNo
BLADE
Leaks - HYDRAULICSOverall good
SCARIFER
Brackets / Studs - SCARIFERGood
Lines / Fittings - SCARIFERGood
Pins & Bushings - SCARIFERGood
TIRES
Leaks - HYDRAULICS17.5R25
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
Leaks - HYDRAULICSInspection performed @ 5379 hrs.


From the manufacturer:

Supplied by HeavyEquipmentData.com →

Circle
Blade Tip Angle - Front40 deg
Blade Tip Angle - Rear5 deg
Diameter60.3 in  ( 153 cm )
Max Lift Above Ground16.9 in  ( 43 cm )
Max Reach Outside Tires - Left68.6 in  ( 174 cm )
Max Reach Outside Tires - Right75.0 in  ( 191 cm )
Rotation360 deg
Shift Left25.9 in  ( 66 cm )
Shift Right25.9 in  ( 66 cm )
Dimensions
Blade Base8.3 ft  ( 3 m )
Height to Top of Isomount Cab10.9 ft  ( 3 m )
Overall Length29.0 ft  ( 9 m )
Rear Ground Clearance1.2 ft  ( 0 m )
Tandem Axle Wheelbase5.0 ft  ( 2 m )
Wheelbase19.5 ft  ( 6 m )
Width Over Tires8.3 ft  ( 3 m )
Engine
Bore4.2 in  ( 11 cm )
Displacement427.8 cu in  ( 7,010 cu cm )
Engine ModelC7.1 ACERT
Net Power Gear 1-2145.0 hp  ( 108 kw )
Number of Cylinders6.0
Power Measured @2,100.0 rpm
Stroke5.4 in  ( 14 cm )
Torque692.6 lbs ft  ( 939 nm )
Front Axle
Ground Clearance1.9 ft  ( 1 m )
Oscillation - Total32 deg
Wheel Lean18 deg
Hydraulic System
Pump Flow55.7 gpm  ( 211 lpm )
Pump TypeVariable Piston
Relief Valve Pressure3,500.0 psi
Moldboard
Blade Down Pressure27,236.0 lbs  ( 12,354 kg )
Blade Pull at Max Weight29,980.7 lbs  ( 13,599 kg )
Max Depth of Cut28.4 in  ( 72 cm )
Moldboard Height24.0 in  ( 61 cm )
Moldboard Thickness0.9 in  ( 2 cm )
Moldboard Width12.0 ft  ( 4 m )
Side Shift Left20.1 in  ( 51 cm )
Side Shift Right26.0 in  ( 66 cm )
Operating Specifications
Circle Gearbox Fluid Capacity1.9 gal  ( 7 l )
Cooling System Fluid Capacity13.0 gal  ( 49 l )
Fuel Capacity99.9 gal  ( 378 l )
Hydraulic System Fluid Capacity17.0 gal  ( 64 l )
Max Operation Weight - Front Axle15,675.0 lbs  ( 7,110 kg )
Max Operation Weight - Rear Axle33,312.0 lbs  ( 15,110 kg )
Max Operation Weight - Total48,987.0 lbs  ( 22,220 kg )
Oil System Fluid Capacity8.0 gal  ( 30 l )
Rear Diff/Final Drive Fluid Capacity16.6 gal  ( 63 l )
Std Operation Weight - Front Axle10,563.0 lbs  ( 4,791 kg )
Std Operation Weight - Rear Axle29,329.0 lbs  ( 13,303 kg )
Std Operation Weight - Total39,892.0 lbs  ( 18,095 kg )
Tandem Case Fluid Capacity (each)15.6 gal  ( 59 l )
Tire Size17.5 R25
Steering System
Articulation Angle20 deg
Turning Radius24.3 ft  ( 7 m )
Transmission
Max Speed - Forward28.4 mph  ( 46 kph )
Max Speed - Reverse22.5 mph  ( 36 kph )
Number of Gears - Forward8.0
Number of Gears - Reverse6.0
Transmission TypeDirect Drive, Powershift

Dealer Contact Info:

Gregory Poole CAT




Contact: McCrea Wallace

Click for Phone Number


veritread button





39.04690 \\ -77.49030 \\ Ashburn \\ PA