This machine has been sold.

1999 Caterpillar 12H


Machine Info:

Serial Number:4XM02286
Machine Location:JURUPA VALLEY, CA


1999 Caterpillar 12H Motor Grader, s/n 4XM02286, Cat 3306 diesel, Powershift 8F 6R, with 12ft mold board, side shift, rotate, pan, tilt, hydraulic rippers enclosed cab , EROPS (may be subject to arb regulations, runs moves & operates, has key, title only) (Reads 2,450 hours) NOTE: This unit is being sold AS IS/WHERE IS via Timed Auction and is located in Jurupa Valley, CA. (Buyer is responsible for removal. Assistance by consignor or JJ Kane Auctioneers is not assured.)

Specs from the manufacturer:

Blade Tip Angle - Front40 °
Blade Tip Angle - Rear5 °
Diameter60 in (153 cm)
Max Lift Above Ground19 in (48 cm)
Max Reach Outside Tires - Left74 in (187 cm)
Max Reach Outside Tires - Right71 in (181 cm)
Rotation360 °
Shift Left27 in (70 cm)
Shift Right29 in (73 cm)
Blade Base9 ft (3 m)
Front Ground Clearance2 ft (1 m)
Height to Top of Isomount Cab10 ft (3 m)
Overall Length28 ft (9 m)
Rear Ground Clearance1 ft (0 m)
Tandem Axle Wheelbase5 ft (2 m)
Wheelbase20 ft (6 m)
Width Over Tires8 ft (2 m)
Displacement537 cu in (0 m)
Engine ModelC-9 ETA VHP
Max Power165 hp (123 kw)
Net Power Gear 1-2145 hp (108 kw)
Net Power Gear 4-6165 hp (123 kw)
Net Power Gear 5-6165 hp (123 kw)
Net Power Gears 7-8165 hp (123 kw)
Number of Cylinders6
Power Measured @2,000 rpm
Front Axle
Ground Clearance2 ft (1 m)
Oscillation - Total32 °
Wheel Lean18 °
Hydraulic System
Pump Flow52 gal/min (196 l/min)
Pump Typevariable piston
Relief Valve Pressure3,500 psi
Blade Down Pressure23,808 lbs (10,799 kg)
Blade Pull at Max Weight28,867 lbs (13,094 kg)
Max Depth of Cut29 in (73 cm)
Moldboard Height24 in (61 cm)
Moldboard Thickness1 in (2 cm)
Moldboard Width12 ft (4 m)
Side Shift Left21 in (52 cm)
Side Shift Right26 in (66 cm)
Operating Specifications
Alternator Supplied Amperage75 A
Circle Gearbox Fluid Capacity2 gal (7 l)
Cooling System Fluid Capacity12 gal (44 l)
Fuel Capacity100 gal (379 l)
Hydraulic System Fluid Capacity20 gal (74 l)
Max Operation Weight - Front Axle13,744 lbs (6,234 kg)
Max Operation Weight - Rear Axle32,074 lbs (14,549 kg)
Max Operation Weight - Total45,818 lbs (20,783 kg)
Oil System Fluid Capacity7 gal (27 l)
Operating Voltage24 V V
Rear Diff/Final Drive Fluid Capacity12 gal (46 l)
Std Operation Weight - Front Axle8,346 lbs (3,786 kg)
Std Operation Weight - Rear Axle22,974 lbs (10,421 kg)
Std Operation Weight - Total31,320 lbs (14,207 kg)
Tandem Case Fluid Capacity (each)17 gal (64 l)
Tire Size14.00-24 12PR
Steering System
Articulation Angle50 °
Turning Radius24 ft (7 m)
Max Speed - Forward27 mph (44 kph)
Max Speed - Reverse22 mph (35 kph)
Number of Gears - Forward8
Number of Gears - Reverse6
Transmission Typedirect drive power shift

Dealer Contact Info:

JJ Kane Auctioneers

Click for Phone Number

ceg-logo ceg-logo ceg-logo ceg-logo ceg-logo