| Blades |
| Blade Tip Range - Backward | 5 deg |
| Blade Tip Range - Forward | 40 deg |
| Circle Centershift - Left | 27.4 in ( 70 cm ) |
| Circle Centershift - Right | 28.7 in ( 73 cm ) |
| Maximum Blade Position Angle | 90 deg |
| Maximum Depth of Cut | 28.1 in ( 71 cm ) |
| Maximum Lift Above Ground | 18.9 in ( 48 cm ) |
| Maximum Shoulder Reach Outside of Tires - Left | 70.5 in ( 179 cm ) |
| Maximum Shoulder Reach Outside of Tires - Right | 77.9 in ( 198 cm ) |
| Moldboard Sideshift - Left | 20.1 in ( 51 cm ) |
| Moldboard Sideshift - Right | 26.0 in ( 66 cm ) |
| Circle |
| Blade Tip Angle - Front | 40 deg |
| Blade Tip Angle - Rear | 5 deg |
| Diameter | 60.2 in ( 153 cm ) |
| Max Reach Outside Tires - Left | 70.5 in ( 179 cm ) |
| Max Reach Outside Tires - Right | 77.9 in ( 198 cm ) |
| Shift Left | 27.4 in ( 70 cm ) |
| Shift Right | 28.7 in ( 73 cm ) |
| Dimensions |
| Blade Base | 8.4 ft ( 3 m ) |
| Front Ground Clearance | 1.9 ft ( 1 m ) |
| Ground Clearance - Rear Axle | 13.3 in ( 34 cm ) |
| Height - Exhaust Stack | 121.0 in ( 307 cm ) |
| Height - Front Axle Center | 23.5 in ( 60 cm ) |
| Height - Top of Cab | 130.0 ft ( 40 m ) |
| Height - Top of Cylinders | 119.0 in ( 302 cm ) |
| Height to Top of Isomount Cab | 10.8 ft ( 3 m ) |
| Length - Between Tandem Axles | 60.0 in ( 152 cm ) |
| Length - Front Axle to Mid Tandem | 241.0 in ( 612 cm ) |
| Length - Front Axle to Moldboard | 100.0 in ( 254 cm ) |
| Length - Front Tire to Rear of Machine | 344.0 in ( 874 cm ) |
| Overall Length | 28.6 ft ( 9 m ) |
| Rear Ground Clearance | 1.2 ft ( 0 m ) |
| Tandem Axle Wheelbase | 5.0 ft ( 2 m ) |
| Wheelbase | 20.1 ft ( 6 m ) |
| Width - Outside Front Tires | 98.0 in ( 249 cm ) |
| Width - Outside Rear Tires | 98.0 in ( 249 cm ) |
| Width - Tire Center Lines | 84.0 in ( 213 cm ) |
| Width Over Tires | 8.2 ft ( 3 m ) |
| Engine |
| Base Power (1st Gear) - Net | 183.0 hp ( 136 kw ) |
| Base Power (1st Gear) - Net - Metric | 186.0 hp ( 139 kw ) |
| Bore | 4.3 in ( 11 cm ) |
| Derating Altitude | 10,000.0 ft ( 3,048 m ) |
| Displacement | 439.0 cu in ( 0 cu m ) |
| Emissions | Emissions equivalent to U.S. EPA Tier 3 and EU Stage IIIA. |
| Engine Model | Cat C7 ACERT |
| High - Ambient Capability | 122 deg |
| High Ambient - Fan Speed - Maximum | 1,650 rpm |
| High Ambient - Fan Speed - Minimum | 600.0 rpm |
| Max Power | 183.0 hp ( 136 kw ) |
| Net Power Gears 7-8 | 183.0 hp ( 136 kw ) |
| Number of Cylinders | 6.0 |
| Power Measured @ | 2,000.0 rpm |
| Speed at Rated Power | 2,000 rpm |
| Standard - Ambient Capability | 109 deg |
| Standard - Fan Speed - Maximum | 1,450 rpm |
| Standard - Fan Speed - Minimum | 600.0 rpm |
| Stroke | 5.0 in ( 13 cm ) |
| Torque Rise - VHP Plus | 39% |
| VHP Plus Range - Net | 136-174 kW (183-233) |
| VHP Plus Range - Net - Metric | 136-174 kW (186-237) |
| Frame |
| Circle - Blade Beam Thickness | 1.6 in ( 4 cm ) |
| Circle - Diameter | 60.2 in ( 153 cm ) |
| Drawbar - Height | 6.0 in ( 15 cm ) |
| Drawbar - Width | 3.0 in ( 8 cm ) |
| Front Axle - Height to Center | 23.0 in ( 58 cm ) |
| Front Axle - Total Oscillation per Side | 32 deg |
| Front Axle - Wheel Lean - Left/Right | 18 deg |
| Front Frame Structure - Height | 12.0 ft ( 4 m ) |
| Front Frame Structure - Width | 12.0 ft ( 4 m ) |
| Front Axle |
| Ground Clearance | 1.9 ft ( 1 m ) |
| Oscillation - Total | 32 deg |
| Wheel Lean | 18 deg |
| Hydraulic System |
| Circuit Type | Electro-hydraulic load sensing, closed center |
| Maximum System Pressure | 3,500.0 psi |
| Pump Flow | 55.7 gpm ( 211 lpm ) |
| Pump Output | 55.7 gpm ( 211 lpm ) |
| Pump Type | Variable piston |
| Relief Valve Pressure | 3,500.0 psi |
| Standby Pressure | 450.0 psi |
| Moldboard |
| Arc Radius | 16.3 in ( 41 cm ) |
| Blade Pull - Base GVW | 24,294.0 lbs ( 11,020 kg ) |
| Blade Pull - Maximum GVW | 31,758.0 lbs ( 14,405 kg ) |
| Blade Pull at Max Weight | 45,787.8 lbs ( 20,769 kg ) |
| Blade Width | 12.0 ft ( 4 m ) |
| Cutting Edge Thickness | 0.6 in ( 2 cm ) |
| Cutting Edge Width | 6.0 in ( 15 cm ) |
| End Bit - Thickness | 0.6 in ( 2 cm ) |
| End Bit - Width | 6.0 in ( 15 cm ) |
| Max Depth of Cut | 28.1 in ( 71 cm ) |
| Moldboard - Height | 24.0 in ( 61 cm ) |
| Moldboard - Thickness | 0.9 in ( 2 cm ) |
| Moldboard - Width | 12.0 ft ( 4 m ) |
| Moldboard Height | 24.0 in ( 61 cm ) |
| Moldboard Length | 12.0 ft ( 4 m ) |
| Moldboard Thickness | 0.9 in ( 2 cm ) |
| Moldboard Width | 12.0 ft ( 4 m ) |
| Side Shift Left | 20.1 in ( 51 cm ) |
| Side Shift Right | 26.0 in ( 66 cm ) |
| Throat Clearance | 6.5 in ( 17 cm ) |
| Operating Specifications |
| Articulation Angle - Left/Right | 20 deg |
| Circle Gearbox Fluid Capacity | 1.8 gal ( 7 l ) |
| Cooling System Fluid Capacity | 12.4 gal ( 47 l ) |
| Forward - 1st | 2.5 mph ( 4 kph ) |
| Forward - 2nd | 3.4 mph ( 5 kph ) |
| Forward - 3rd | 5.0 mph ( 8 kph ) |
| Forward - 4th | 6.8 mph ( 11 kph ) |
| Forward - 5th | 10.6 mph ( 17 kph ) |
| Forward - 6th | 14.5 mph ( 23 kph ) |
| Forward - 7th | 19.9 mph ( 32 kph ) |
| Forward - 8th | 29.0 mph ( 47 kph ) |
| Fuel Capacity | 110.0 gal ( 416 l ) |
| Hydraulic System Fluid Capacity | 15.9 gal ( 60 l ) |
| Max Operation Weight - Front Axle | 17,908.0 lbs ( 8,123 kg ) |
| Max Operation Weight - Rear Axle | 32,967.0 lbs ( 14,954 kg ) |
| Max Operation Weight - Total | 50,875.0 lbs ( 23,077 kg ) |
| Operating Weight | 33,356.0 lbs ( 15,130 kg ) |
| Rear Diff/Final Drive Fluid Capacity | 17.2 gal ( 65 l ) |
| Reverse - 1st | 2 |
| Reverse - 2nd | 3.7 mph ( 6 kph ) |
| Reverse - 3rd | 5.4 mph ( 9 kph ) |
| Reverse - 4th | 8.4 mph ( 14 kph ) |
| Reverse - 5th | 15.7 mph ( 25 kph ) |
| Reverse - 6th | 22.9 mph ( 37 kph ) |
| Std Operation Weight - Front Axle | 9,173.0 lbs ( 4,161 kg ) |
| Std Operation Weight - Rear Axle | 24,183.0 lbs ( 10,969 kg ) |
| Std Operation Weight - Total | 33,356.0 lbs ( 15,130 kg ) |
| Steering Range - Left/Right | 47.5 deg |
| Tandem Case Fluid Capacity (each) | 16.9 gal ( 64 l ) |
| Top Speed - Forward | 29.0 mph ( 47 kph ) |
| Top Speed - Reverse | 22.9 mph ( 37 kph ) |
| Turning Radius - Outside Front Tires | 25.0 ft ( 8 m ) |
| Power Train |
| Brakes - Parking | Multiple oil disc |
| Brakes - Secondary | Dual circuit control system |
| Brakes - Service | Multiple oil disc |
| Brakes - Service - Surface Area | 3,565.0 cu in ( 0 cu m ) |
| Forward/Reverse Gears | 8 Forward/6 Reverse |
| Transmission | Direct drive, power shift, countershaft |
| Ripper |
| Machine Length Increase, Beam Raised | 36.2 in ( 92 cm ) |
| Penetration Force | 20,540.0 lbs ( 9,317 kg ) |
| Pry-Out Force | 26,259.0 lbs ( 11,911 kg ) |
| Ripper Shank Holder Spacing | 21.0 in ( 53 cm ) |
| Ripper Shank Holders | 5.0 |
| Ripping Depth - Maximum | 16.8 in ( 43 cm ) |
| Scarifier |
| Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing | 4.6 in ( 12 cm ) |
| Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum | 18.4 in ( 47 cm ) |
| Front, V-Type, 5 or 11 Tooth - Working Width | 47.4 in ( 120 cm ) |
| Mid, V-Type - Scarifier Shank Holder Spacing | 4.6 in ( 12 cm ) |
| Mid, V-Type - Scarifier Shank Holders | 11.0 |
| Mid, V-Type - Scarifying Depth, Maximum | 11.5 in ( 29 cm ) |
| Mid, V-Type - Working Width | 46.6 in ( 118 cm ) |
| Rear - Scarifier Shank Holder Spacing | 10.5 in ( 27 cm ) |
| Rear - Scarifier Shank Holders | 9.0 |
| Rear - Scarifying Depth, Maximum | 10.5 in ( 27 cm ) |
| Rear - Working Width | 91.0 in ( 231 cm ) |
| Service Refill |
| Circle Drive Housing | 1.8 gal ( 7 l ) |
| Cooling System | 10.6 gal ( 40 l ) |
| Engine Oil | 6.6 gal ( 25 l ) |
| Front Wheel Spindle Bearing Housing | 0.2 gal ( 1 l ) |
| Fuel Capacity | 110.0 gal ( 416 l ) |
| Hydraulic System - Tank | 16.9 gal ( 64 l ) |
| Tandem Housing - Each | 16.9 gal ( 64 l ) |
| Transmission - Differential - Final Drives | 16.9 gal ( 64 l ) |
| Standards |
| Brakes | ISO 3450:1996 |
| ROPS/FOPS | ISO 3471:2008, ISO 3449:2005 Level II |
| Sound | ISO 6394:2008, ISO 6395:2008 |
| Steering | ISO 5010:2007 |
| Steering System |
| Articulation Angle | 20 deg |
| Turning Radius | 25.5 ft ( 8 m ) |
| Tandems |
| Drive Chain Pitch | 2.0 in ( 5 cm ) |
| Height | 19.9 in ( 51 cm ) |
| Sidewall Thickness - Inner | 0.6 in ( 2 cm ) |
| Sidewall Thickness - Outer | 0.7 in ( 2 cm ) |
| Tandem Oscillation - Front Down | 25 deg |
| Tandem Oscillation - Front Up | 15 deg |
| Wheel Axle Spacing | 60.0 in ( 152 cm ) |
| Width | 7.9 in ( 20 cm ) |
| Transmission |
| Max Speed - Forward | 29.0 mph ( 47 kph ) |
| Max Speed - Reverse | 22.9 mph ( 37 kph ) |
| Number of Gears - Forward | 8.0 |
| Number of Gears - Reverse | 6.0 |
| Transmission Type | direct drive, power shift, countershaft |
| Weights |
| Gross Vehicle Weight - Base - Front Axle | 9,561.0 lbs ( 4,337 kg ) |
| Gross Vehicle Weight - Base - Rear Axle | 26,993.0 lbs ( 12,244 kg ) |
| Gross Vehicle Weight - Base - Total | 36,554.0 lbs ( 16,581 kg ) |
| Gross Vehicle Weight - Maximum - Front Axle | 16,606.0 lbs ( 7,532 kg ) |
| Gross Vehicle Weight - Maximum - Rear Axle | 35,287.0 lbs ( 16,006 kg ) |
| Gross Vehicle Weight - Maximum - Total | 51,893.0 lbs ( 23,539 kg ) |
| Gross Vehicle Weight - Typically Equipped | 41,868.0 lbs ( 18,991 kg ) |
| Gross Vehicle Weight - Typically Equipped - Front Axle | 11,716.0 lbs ( 5,314 kg ) |
| Gross Vehicle Weight - Typically Equipped - Total | 41,868.0 lbs ( 18,991 kg ) |
| Operating Weight - Typically Equipped | 41,868.0 lbs ( 18,991 kg ) |
