2002 Caterpillar 143H For Sale in Billings, MT



For Sale: $88,500.00 USD



Machine Info:

Hours:7320
Serial Number:1AL01270
Stock Number:X21G0556
Machine Location:BILLINGS, MT 59101

Description:

2002 143H MOTOR GRADER

Machine Details:

GENERAL APPEARANCE
Notes - GENERAL APPEARANCE - Fair cosmetics- normal sun fade and rock chipped paint- minor dings.
SAFETY ITEMS
ROPSYes
Parking Brake - SAFETY ITEMSFair - The in cab valve seeps air- but is functional.
GAUGES, OPERATOR STATION, CONSOLE
Notes - GAUGES, OPERATOR STATION, CONSOLE - Fair interior- good glass- floor mat worn out- seat wear- switch wear-functional.
ENGINE
Notes - ENGINE - Cold started well- average power for age- several minor wet fittings/ O rings- see photos.
COOLING SYSTEM
Notes - COOLING SYSTEM - Normal wear for age- fully operational.
ELECTRICAL, STARTING AND CHARGING SYSTEM
Notes - ELECTRICAL, STARTING AND CHARGING SYSTEM - The center shift lock warning light is active- did not activate.
Batteries / CablesGood
StarterGood
WiringFair - The fuse is removed from the center shift lock system.
TRANSMISSION
Operating Condition - TRANSMISSIONGood - Only able to operate at low speed due to flat RR tire- no abnormal functions.
STEERING
Notes - STEERING - Left king pin and tie rod grease seals are near service limits.
Articulate P & BGood
King PinsFair
Steering LinkageFair
Tie Rods / Rod EndsFair
BRAKE
Control ValveGood
HYDRAULICS
Notes - HYDRAULICS - Several under cab control valves and O rings are seeping/ leaking.
Circle Drive BoxFair - See photos- the circle drive bull gear is at service limits.
Circle Side Shift CylinderGood
Hydraulic PumpFair
Lift CylindersGood
LinkageFair - normal wear
Side Shift CylinderFair - Blade shift seal seep
Tip CylinderGood
BLADE
Notes - BLADE - Standard shim/ adjustment service is due.
Face / MoldboardFair
RIPPER
FrameGood
Lines / Fittings - RIPPERGood
TIRES
Average Life Remaining - TIRES - Left side 50%- right side runouts with tandems bald and RR flat.
Tire Size - TIRES - 17.5-25
Left Front
Left Rear
Right Front
Right Rear
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
comment 1 - Available for inspection in Williston ND. Current hour meter shows 7,320 and last dealer record of service was 4-2013 at 6,324 hours.
comment 2 - Customer installed Grade control system. AWD-ripper-push block-lo cab with AC-base plus 1 hyd.


Specs from the manufacturer:

Circle
Blade Tip Angle - Front40 °
Blade Tip Angle - Rear5 °
Diameter60 in (153 cm)
Max Lift Above Ground19 in (48 cm)
Max Reach Outside Tires - Left75 in (189 cm)
Max Reach Outside Tires - Right78 in (198 cm)
Shift Left27 in (70 cm)
Shift Right29 in (73 cm)
Dimensions
Blade Base8 ft (3 m)
Front Ground Clearance2 ft (1 m)
Height to Top of Isomount Cab10 ft (3 m)
Overall Length29 ft (9 m)
Rear Ground Clearance1 ft (0 m)
Tandem Axle Wheelbase5 ft (2 m)
Wheelbase20 ft (6 m)
Width Over Tires8 ft (3 m)
Engine
Displacement629 cu in (0 m)
Engine Model3176C DITA ATAAC VHP
Max Power205 hp (153 kw)
Net Power Gear 1-2165 hp (123 kw)
Net Power Gear 4-6185 hp (138 kw)
Net Power Gear 5-6185 hp (138 kw)
Net Power Gears 7-8205 hp (153 kw)
Front Axle
Ground Clearance2 ft (1 m)
Oscillation - Total32 °
Wheel Lean18 °
Hydraulic System
Pump Flow54 gal/min (206 l/min)
Pump Typeaxial piston
Relief Valve Pressure3,500 psi
Moldboard
Blade Down Pressure30,126 lbs (13,665 kg)
Blade Pull at Max Weight43,977 lbs (19,948 kg)
Max Depth of Cut28 in (71 cm)
Moldboard Height24 in (61 cm)
Moldboard Thickness1 in (2 cm)
Moldboard Width12 ft (4 m)
Side Shift Left21 in (52 cm)
Side Shift Right26 in (66 cm)
Operating Specifications
Circle Gearbox Fluid Capacity2 gal (7 l)
Cooling System Fluid Capacity10 gal (38 l)
Fuel Capacity105 gal (397 l)
Hydraulic System Fluid Capacity21 gal (79 l)
Max Operation Weight - Front Axle17,443 lbs (7,912 kg)
Max Operation Weight - Rear Axle31,420 lbs (14,252 kg)
Max Operation Weight - Total48,863 lbs (22,164 kg)
Std Operation Weight - Front Axle9,493 lbs (4,306 kg)
Std Operation Weight - Rear Axle24,177 lbs (10,967 kg)
Std Operation Weight - Total33,670 lbs (15,273 kg)
Tandem Case Fluid Capacity (each)17 gal (64 l)
Steering System
Articulation Angle20 °
Turning Radius25 ft (8 m)
Transmission
Max Speed - Forward27 mph (44 kph)
Max Speed - Reverse22 mph (35 kph)
Number of Gears - Forward8
Number of Gears - Reverse6
Transmission Typedirect drive, power shift

Dealer Contact Info:

Tractor and Equipment CAT


Click for Phone Number







ceg-logo ceg-logo ceg-logo ceg-logo ceg-logo