Equipment ↠ Caterpillar ↠ Motor Graders ↠ THIS Caterpillar 143H

Caterpillar 143H

Name: Caterpillar 143H
Brand: Caterpillar
Price: 99500 USD
Availability: OutOfStock

❮

❯

MACHINE SOLD

Ziegler CAT

Ziegler CAT Dealer Info

Ziegler CAT Website

Click here to email Ziegler CAT.

Contact: Used Equipment

Click for Phone Number

Machine Info:

Hours:	11026
Serial Number:	1AL00676
Machine Location:	MINNEAPOLIS, MN
More Information:	https://catused.com/cu/10105066

Description:

143H, AIR CONDITIONER WITH HEATER, AIR DRYER, ALTERNATOR, 100 AMP, AUTOSHIFT, TRANSMISSION, BATTERY, EXTREME DUTY 1300 CCA, CAB, ROPS, HIGH PROFILE, CONVERTER, COMMUNICATION, Engine, FAN, DEFROSTER, FRONT WINDOW, FAN, DEFROSTER, REAR WINDOW, HEATER, ENGINE COOLANT, 120V, HYDRAULICS, BASE & 4 FUNCTIONS, LIGHTS, CAB AND BAR MOUNTED, LIGHTS, RH, SNOW WING, CAB, LIGHTS, WORK, LINES, PLOW/DOZER LIFT, AWD RH, LINES, PLOW/DOZER LIFT-RIGHT, LINES, RIPPER, MIRRORS, OUTSIDE MOUNTED, PROTECTION, SNOW, SNOW ARRANGEMENT, A/C, SPEEDOMETER/TACHOMETER, STARTING AID, ETHER, TIRES, 14.0R24 MX XSNO+ 1* MP, TRANSMISSION AND DRIVE LINE, WIPER/WASHER, REAR HP

Machine Details:

GENERAL APPEARANCE
S.O.S. Taken	No
SAFETY ITEMS
ROPS	Yes
ROPS Certification Plate	Yes
GAUGES, OPERATOR STATION, CONSOLE
Current O&MM	Yes
ENGINE
Blow By	Yes
Compression in Radiator	No
Fluid Levels OK?	Yes
Knocking	No
Oil Leaks	No
Water in Oil	No
COOLING SYSTEM
Belts / Pulleys - COOLING SYSTEM	Good
Coolers	Fair
Fan	Good
Hoses	Good
Radiator	Fair
Water Pump	Good
ELECTRICAL, STARTING AND CHARGING SYSTEM
Block Heater	Yes
Ether Aid	Yes
Signal Lights	Yes
TRANSMISSION
Leaks - TRANSMISSION	No
Transmission - Noisy	No
STEERING
Transmission - Noisy	THE MACHINE IS STEERING NORMAL.
BRAKE
Transmission - Noisy	ALL BRAKES ARE FUNCTIONING NORMAL.
DRIVECHAIN / TANDEMS
Wheel Lugs & Rims	Good
HYDRAULICS
Transmission - Noisy	THE HYDRAULICS ARE PERFORMING NORMAL.
BLADE
Transmission - Noisy	THE CIRCLE IS TIGHT.
SNOW WING
Cylinder Condition	Fair
Operating Condition - SNOW WING	Fair
TIRES
Transmission - Noisy	14.00R24
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
Transmission - Noisy	THE MACHINE IS CURRENTLY IN GOOD FUNCTIONAL CONDITION WITH ORIGINAL ENGINE THAT IS RUNNING SMOOTH & TRANSMISSION THAT WAS RECONDITIONED AT 9782 HOURS. THE CIRCLE IS TIGHT OVERALL.

From the manufacturer:

Supplied by HeavyEquipmentData.com →

Circle
Blade Tip Angle - Front	40 deg
Blade Tip Angle - Rear	5 deg
Diameter	60.2 in ( 153 cm )
Max Lift Above Ground	18.9 in ( 48 cm )
Max Reach Outside Tires - Left	74.6 in ( 189 cm )
Max Reach Outside Tires - Right	77.9 in ( 198 cm )
Shift Left	27.4 in ( 70 cm )
Shift Right	28.7 in ( 73 cm )
Dimensions
Blade Base	8.4 ft ( 3 m )
Front Ground Clearance	2.0 ft ( 1 m )
Height to Top of Isomount Cab	10.3 ft ( 3 m )
Overall Length	28.6 ft ( 9 m )
Rear Ground Clearance	1.2 ft ( 0 m )
Tandem Axle Wheelbase	5.0 ft ( 2 m )
Wheelbase	20.3 ft ( 6 m )
Width Over Tires	8.4 ft ( 3 m )
Engine
Displacement	629.0 cu in ( 10,307 cu cm )
Engine Model	3176C DITA ATAAC VHP
Max Power	205.0 hp ( 153 kw )
Net Power Gear 1-2	165.0 hp ( 123 kw )
Net Power Gear 4-6	185.0 hp ( 138 kw )
Net Power Gear 5-6	185.0 hp ( 138 kw )
Net Power Gears 7-8	205.0 hp ( 153 kw )
Front Axle
Ground Clearance	2.0 ft ( 1 m )
Oscillation - Total	32 deg
Wheel Lean	18 deg
Hydraulic System
Pump Flow	54.4 gpm ( 206 lpm )
Pump Type	axial piston
Relief Valve Pressure	3,500.0 psi
Moldboard
Blade Down Pressure	30,126.2 lbs ( 13,665 kg )
Blade Pull at Max Weight	43,977.0 lbs ( 19,948 kg )
Max Depth of Cut	28.1 in ( 71 cm )
Moldboard Height	24.0 in ( 61 cm )
Moldboard Thickness	0.9 in ( 2 cm )
Moldboard Width	12.0 ft ( 4 m )
Side Shift Left	20.6 in ( 52 cm )
Side Shift Right	26.0 in ( 66 cm )
Operating Specifications
Circle Gearbox Fluid Capacity	1.8 gal ( 7 l )
Cooling System Fluid Capacity	10.0 gal ( 38 l )
Fuel Capacity	105.0 gal ( 397 l )
Hydraulic System Fluid Capacity	20.8 gal ( 79 l )
Max Operation Weight - Front Axle	17,443.0 lbs ( 7,912 kg )
Max Operation Weight - Rear Axle	31,420.0 lbs ( 14,252 kg )
Max Operation Weight - Total	48,863.0 lbs ( 22,164 kg )
Std Operation Weight - Front Axle	9,493.0 lbs ( 4,306 kg )
Std Operation Weight - Rear Axle	24,177.0 lbs ( 10,967 kg )
Std Operation Weight - Total	33,670.0 lbs ( 15,272 kg )
Tandem Case Fluid Capacity (each)	16.9 gal ( 64 l )
Steering System
Articulation Angle	20 deg
Turning Radius	24.6 ft ( 8 m )
Transmission
Max Speed - Forward	27.4 mph ( 44 kph )
Max Speed - Reverse	21.6 mph ( 35 kph )
Number of Gears - Forward	8.0
Number of Gears - Reverse	6.0
Transmission Type	direct drive, power shift

Dealer Contact Info:

Ziegler CAT

Ziegler CAT Dealer Info

Ziegler CAT Website

Click here to email Ziegler CAT.

Contact: Used Equipment

Click for Phone Number

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon