Create a CEG Account  /  CEG Login

2019 Caterpillar 160M3AWD For Sale in Fargo, ND


/ Save to Watch List

For Sale: $248,000.00 USD

Apply for Financing

Machine Info:

Hours:5723
Serial Number:N9K01035
Machine Location:FARGO, ND
More Information:https://catused.com/cu/10273661

Description:

2019 CAT 160M3 AWD MOTOR GRADER, Accugrade Ready, Arrangement, Snow, ARTICULATION GUARD, BASE + 4 (WM,WT,FL,RIP) NOFLT, CAB, PLUS (INTERIOR), CAB, PLUS (STANDARD GLASS), COLD WEATHER PLUS PACKAGE AWD, CONTROL,AUTO ARTICULATION-DEMO, CONVERTER GP, DECALS, ENGLISH (U.S.), DRAIN, GRAVITY, ENGINE OIL, Emissions Level - EPA - EPA TIER 4f, Emissions Level - EU - EU STAGE IV, FAN, DEFROSTER, REAR WINDOW, FAN, REVERSING, FENDERS, FRONT, AWD, FENDERS, REAR, GLOBAL ARRANGEMENT,LOW AMBIENT, GRADE CONTROL X SLOPE, Guard, Transmission, HEADLIGHTS,FRONT, HIGH,HALOGEN, HEATER, ENGINE COOLANT, 120V, JOYSTICK CONTROLS, ADVANCED, LANGUAGE, ENGLISH, LIFT GROUP, FRONT MOUNTING, LIGHT, LED WARNING STROBE, LIGHTS, ARM, FOLD DOWN, LIGHTS, ROADING, HALOGEN, LIGHTS, WORKING, PLUS, HALOGEN, LINES, RIPPER, ADDITIONAL, LINES,STANDARD W/O ACCUMULATOR, MIRRORS, OUTSIDE HEATED 24V, MOLDBOARD, 14' PLUS, MOUNT,SNOW WING,FRAME RDY HAL, MOUNTING, WARNING LIGHT, Online Owner's Manual , PRECLEANER, NON SY-KLONE, PRODUCT L

Machine Details:

GENERAL CONDITION
Machine Starts and is OperableYes
S.O.S. (All Compartments)Yes
Tires are Aired Up and DrivableYes
GENERAL APPEARANCE
Cleaning RequiredNo
SAFETY ITEMS
ROPS Certification PlateYes
Safety Decals In PlaceYes
Safety Decals LegibleYes
OPERATOR STATION
Current O&MMYes
Current Parts ManualYes
Current Safety ManualYes
ENGINE
Apparent Other Engine DamageNo
Blow ByNo
Fuel LeaksNo
KnockingNo
Oil LeaksNo
Water in OilNo
COOLING SYSTEM
Compression in RadiatorNo
Oil in Anti-FreezeNo
ELECTRICAL, STARTING AND CHARGING SYSTEM
Block HeaterYes
Ether AidYes
Signal LightsYes
TRANSMISSION
Leaks - TRANSMISSIONNo
Transmission - NoisyNo
STEERING
Articulate P & BGood
King PinsFair
Steering CylinderGood
Steering LinkageFair
Tie Rods / Rod EndsFair
Wheel Lean Cylinder - STEERINGFair
BRAKE
AccumulatorsGood
Brake LinkageGood
Control ValveGood
LinesGood
DRIVECHAIN / TANDEMS
Wheel Lugs & RimsGood
HYDRAULICS
Leaks - HYDRAULICSNo
BLADE
Circle A FrameFair
Face / MoldboardFair
RIPPER
FrameFair
Lines / Fittings - RIPPERFair


From the manufacturer:

Supplied by HeavyEquipmentData.com →


The Caterpillar 160M is a motor grader designed for road construction, maintenance, and site preparation. It is part of Caterpillar's M Series grader line and is commonly used for grading, ditching, slope work, and finish leveling. The 160M features a front-mounted blade, articulated frame, and operator controls suited to precise blade positioning and material control. It is typically powered by a diesel engine and configured for municipal, highway, mining, and general earthmoving applications. The model is known for its balance of maneuverability, visibility, and grading accuracy in medium-duty motor grader operations.
Blades
Maximum Shoulder Reach Outside of Tires - Left 82 in (208 cm)
Maximum Shoulder Reach Outside of Tires - Right 90 in (229 cm)
Moldboard Sideshift - Left 32 in (81 cm)
Moldboard Sideshift - Right 37 in (94 cm)
Circle
Blade Tip Angle - Front 40 degrees
Blade Tip Angle - Rear 5 degrees
Diameter 61 in (155 cm)
Max Lift Above Ground 18 in (45 cm)
Max Reach Outside Tires - Left 82 in (209 cm)
Max Reach Outside Tires - Right 90 in (228 cm)
Shift Left 27 in (70 cm)
Shift Right 29 in (73 cm)
Dimensions
Blade Base 9 ft (3 m)
Front Ground Clearance 2 ft (1 m)
Height to Top of Isomount Cab 11 ft (3 m)
Overall Length 29 ft (9 m)
Rear Ground Clearance 1 ft (0 m)
Tandem Axle Wheelbase 5 ft (2 m)
Wheelbase 20 ft (6 m)
Width Over Tires 8 ft (3 m)
Engine
Base Power (1st Gear) - Net 213 hp (159 kw)
Displacement 537 cu in (8,800 cu cm)
Engine Model C9 ACERT VHP
Max Power 213 hp (159 kw)
Net Power Gears 7-8 213 hp (159 kw)
Net Torque Gears 7-8 912 lbs ft (1,237 nm)
Number of Cylinders 6
Power Measured @ 2,000 rpm
Torque Measured @ 2,000 rpm
Front Axle
Ground Clearance 2 ft (1 m)
Oscillation - Total 32 degrees
Wheel Lean 18 degrees
Hydraulic System
Pump Flow 56 gpm (211 lpm)
Pump Type variable piston
Relief Valve Pressure 3,500 psi
Moldboard
Blade Pull at Max Weight 32,904 lbs (14,925 kg)
Max Depth of Cut 30 in (75 cm)
Moldboard Height 27 in (69 cm)
Moldboard Length 14 ft (4 m)
Moldboard Thickness 1 in (3 cm)
Moldboard Width 14 ft (4 m)
Side Shift Left 32 in (82 cm)
Side Shift Right 37 in (95 cm)
Operating Specifications
Circle Gearbox Fluid Capacity 2 gal (7 l)
Cooling System Fluid Capacity 11 gal (40 l)
Fuel Capacity 105 gal (397 l)
Hydraulic System Fluid Capacity 17 gal (64 l)
Max Operation Weight - Front Axle 18,478 lbs (8,381 kg)
Max Operation Weight - Rear Axle 34,317 lbs (15,566 kg)
Max Operation Weight - Total 52,795 lbs (23,947 kg)
Operating Weight 35,060 lbs (15,903 kg)
Rear Diff/Final Drive Fluid Capacity 17 gal (65 l)
Std Operation Weight - Front Axle 9,677 lbs (4,389 kg)
Std Operation Weight - Rear Axle 25,383 lbs (11,514 kg)
Std Operation Weight - Total 35,060 lbs (15,903 kg)
Tandem Case Fluid Capacity (each) 21 gal (80 l)
Steering System
Articulation Angle 20 degrees
Turning Radius 25 ft (8 m)
Transmission
Max Speed - Forward 30 mph (47 kph)
Max Speed - Reverse 23 mph (38 kph)
Number of Gears - Forward 8
Number of Gears - Reverse 6
Transmission Type direct drive power shift countershaft

Dealer Contact Info:

Butler Machinery



Contact: Bill Bauer

Click for Phone Number


Request an equipment inspection
Get shipping quotes




Log In to Your CEG Account







×

Stay Ahead of the Market

Get weekly equipment news, auction updates, and dealer insights — trusted by thousands of industry professionals.



39.96118 \\ -82.99879 \\ Columbus \\ OH \\ US \\ 43215