| Body Capacities |
|
Heaped (Sae 2:1) |
20 cu yd |
|
Struck |
14 cu yd |
|
Tailgate Heaped Sae 2:1 |
20 cu yd |
|
Tailgate Struck |
15 cu yd |
| Body Hoist |
|
Lower Time |
8 s |
|
Raise Time |
10 s |
| Body Plate |
|
Body Plate Type |
High strength Brinell HB450 wear resistant steel |
| Dimensions |
|
Height |
12 ft (4 m)
|
|
Length |
35 ft (11 m)
|
|
Weight |
50,795 lbs (23,036 kg)
|
|
Width |
10 ft (3 m)
|
| Dump |
|
Rated Payload |
58,422 lbs (26,500 kg)
|
|
Rated Payload |
57,320 lbs (26,000 kg)
|
| Engine |
|
Bore |
5 in (12 cm)
|
|
Bore |
5 in (13 cm)
|
|
Displacement |
567 cu in (9,291 cu cm)
|
|
Displacement |
763 cu in (12,500 cu cm)
|
|
Emissions |
The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards. |
|
Engine Model |
Cat C9.3 ACERT |
|
Engine Model |
Cat C13 ACERT |
|
Engine Model - U.S. Epa Tier 4 Final/Eu Stage Iv |
Cat C9.3 ACERT |
|
Engine Model - U.S. Epa Tier 4 Final/Eu Stage Iv |
Cat C9.3 ACERT |
|
Gross Power - Sae J1995 |
320 hp (239 kw)
|
|
Gross Power - Sae J1995 |
320 hp (239 kw)
|
|
Net Power - Iso 14396 |
316 hp (236 kw)
|
|
Net Power - Iso 14396 |
316 hp (236 kw)
|
|
Net Power - Sae J1349 |
314 hp (234 kw)
|
|
Net Power - Sae J1349 |
314 hp (234 kw)
|
|
No Engine De-Rating Below |
7,500 ft (2,286 m)
|
|
No Engine De-Rating Required Below |
7,500 ft (2,286 m)
|
|
Note (1) |
The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard. |
|
Note (2) |
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. |
|
Note (3) |
Net power when the fan is at maximum speed is 214 kW (287 hp) per the SAE reference conditions. |
|
Note (4) |
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications. |
|
Peak Engine Torque Gross (Sae J1995) |
1,275 lbs ft (1,729 nm)
|
|
Peak Engine Torque Gross (Sae J1995) |
1,275 lbs ft (1,729 nm)
|
|
Peak Engine Torque Net (Iso 14396) |
1,262 lbs ft (1,711 nm)
|
|
Peak Engine Torque Net (Sae J1349) |
1,262 lbs ft (1,711 nm)
|
|
Peak Engine Torque Speed |
1,200 rpm |
|
Peak Engine Torque Speed |
1,200 rpm |
|
Stroke |
6 in (15 cm)
|
|
Stroke |
6 in (16 cm)
|
| General Specifications |
|
Articulated/Rigid (Since 2018)
|
A |
|
Articulated/Rigid (2019)
|
A |
|
Drive Configuration (Since 2018)
|
6WD |
|
Drive Configuration (2019)
|
6WD |
|
Engine Type (Since 2018)
|
Cat C9.3 ACERT |
|
Engine Type (2019)
|
Cat C9.3 ACERT |
|
Mfg. Model (Since 2018)
|
725C2 |
|
Mfg. Model (2019)
|
725C2 |
|
Operating Weight (Since 2018)
|
50,795 lbs (23,040 kg)
|
|
Operating Weight (2019)
|
50,795 lbs (23,040 kg)
|
|
Planetary Powershift Transmission (Since 2018)
|
Powershift w/ lockup torque converter |
|
Planetary Powershift Transmission (2019)
|
Powershift w/ lockup torque converter |
|
Rated Payload (Since 2018)
|
27 t (26,500 kg)
|
|
Rated Payload (2019)
|
27 t (26,500 kg)
|
| Operating Weights |
|
Center Axle - Empty |
9,755 lbs (4,425 kg)
|
|
Center Axle - Loaded |
33,455 lbs (15,175 kg)
|
|
Center Axle - Rated Load |
23,700 lbs (10,750 kg)
|
|
Front Axle - Empty |
31,835 lbs (14,440 kg)
|
|
Front Axle - Loaded |
37,374 lbs (16,953 kg)
|
|
Front Axle - Rated Load |
5,512 lbs (2,500 kg)
|
|
Rear Axle - Empty |
9,205 lbs (4,175 kg)
|
|
Rear Axle - Loaded |
32,905 lbs (14,925 kg)
|
|
Rear Axle - Rated Load |
23,700 lbs (10,750 kg)
|
|
Total - Empty |
50,795 lbs (23,040 kg)
|
|
Total - Loaded |
103,707 lbs (47,041 kg)
|
|
Total - Rated Load |
52,912 lbs (24,001 kg)
|
| Service Refill Capacities |
|
Cooling System |
22 gal (83 l)
|
|
Cooling System |
22 gal (83 l)
|
|
Def Tank |
5 gal (20 l)
|
|
Def Tank (Iso 2224-1) |
5 gal (20 l)
|
|
Engine Crankcase |
10 gal (38 l)
|
|
Engine Crankcase |
10 gal (38 l)
|
|
Final Drives/Differential |
33 gal (125 l)
|
|
Final Drives/Differential |
33 gal (125 l)
|
|
Fuel Tank |
109 gal (412 l)
|
|
Fuel Tank |
109 gal (412 l)
|
|
Hydraulic System |
29 gal (110 l)
|
|
Hydraulic System |
29 gal (110 l)
|
|
Output Transfer Gear Box |
6 gal (24 l)
|
|
Output Transfer Gear Box |
6 gal (24 l)
|
|
Transmission |
12 gal (47 l)
|
|
Transmission |
12 gal (47 l)
|
| Sound Levels |
|
Interior Cab |
76 dB(A) |
|
Interior Cab |
76 dB(A) |
|
Note (1) |
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed. |
|
Note (2) |
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. |
| Standards |
|
Brakes |
ISO 3450 2011 |
|
Brakes |
ISO 3450 - 2011 |
|
Cab - Fops |
ISO 3449 Level II 2005 |
|
Cab - Fops |
ISO 3449 Level II - 2005 |
|
Cab - Rops |
ISO 3471 2008 |
|
Cab - Rops |
ISO 3471 - 2008 |
|
Steering |
ISO 5010 2007 |
|
Steering |
ISO 5010 - 2007 |
| Steering |
|
Lock To Lock |
4.75 seconds @ 60 rpm |
|
Lock To Lock |
4.75 seconds @ 60 rpm |
| Transmission |
|
Forward - 1 |
5 mph (8 kph)
|
|
Forward - 1 |
5 mph (8 kph)
|
|
Forward - 2 |
9 mph (14 kph)
|
|
Forward - 2 |
9 mph (14 kph)
|
|
Forward - 3 |
14 mph (23 kph)
|
|
Forward - 3 |
14 mph (23 kph)
|
|
Forward - 4 |
21 mph (34 kph)
|
|
Forward - 4 |
21 mph (34 kph)
|
|
Forward - 5 |
29 mph (47 kph)
|
|
Forward - 5 |
29 mph (47 kph)
|
|
Forward - 6 |
36 mph (58 kph)
|
|
Forward - 6 |
36 mph (58 kph)
|
|
Reverse - 1 |
6 mph (10 kph)
|
|
Reverse - 1 |
6 mph (10 kph)
|
| Turning Circle |
|
Note |
Dimensions are for machines equipped with 23.5R25 tires. |
|
Note |
Dimensions are for machines equipped with 23.5R25 tires. |
|
Turning Dimensions - Aisle Width |
210 in (533 cm)
|
|
Turning Dimensions - Aisle Width |
210 in (533 cm)
|
|
Turning Dimensions - Clearance Radius |
318 in (808 cm)
|
|
Turning Dimensions - Clearance Radius |
318 in (808 cm)
|
|
Turning Dimensions - Inside Radius |
153 in (389 cm)
|
|
Turning Dimensions - Inside Radius |
153 in (389 cm)
|
|
Turning Dimensions - Sae Turning Radius |
294 in (747 cm)
|
|
Turning Dimensions - Sae Turning Radius |
294 in (747 cm)
|
|
Turning Dimensions - Steer Angle - Left/Right |
45 degrees |
| Wheel Base Length |
|
Long Wheel Base |
215 in (547 cm)
|
|
Standard Wheel Base |
157 in (398 cm)
|
