Equipment ↠ Caterpillar ↠ Off-Highway Trucks ↠ THIS 2014 Caterpillar 730C

2014 Caterpillar 730C

Name: 2014 Caterpillar 730C
Brand: Caterpillar
Price: 189000 USD
Availability: OutOfStock

❮

❯

MACHINE SOLD

This machine is available to rent.

The Nice Company

The Nice Company Dealer Info

The Nice Company Website

Click here to email The Nice Company.

Contact: Bryn Smith

Click for Phone Number

Machine Info:

Machine Location:

HOPEDALE, MA

Description:

6x6, Rubber front 50% rear 25-30%, Tailgate, Active rental, hours will fluctuate, Runs Great!

From the manufacturer:

Supplied by HeavyEquipmentData.com →

Body Capacities
Heaped (SAE 2:1)	23.0 cu yd ( 18 cu m )
Struck	17.4 cu yd ( 13 cu m )
Tailgate Heaped SAE 2:1	24.6 cu yd ( 19 cu m )
Tailgate Struck	18.2 cu yd ( 14 cu m )
Body Hoist
Lower Time	8.0 seconds
Raise Time	12.0 seconds
Body Plate
Body Plate Type	High Strength Brinell HB450 Wear Resistant Steel
Dump
Capacity - Heaped	23.0 cu yd ( 18 cu m )
Capacity - Struck	17.4 cu yd ( 13 cu m )
Dump Angle	45 deg
Lower Time	8.0 seconds
Raise Time	12.0 seconds
Rated Payload	62,000.0 lbs ( 28,123 kg )
Engine
Bore	5.2 in ( 13 cm )
Displacement	763.0 cu in ( 12,503 cu cm )
Engine Model	Cat C13
Engine Model - U.S. EPA Tier 4 Final/EU Stage IV	Cat C13 ACERT
Gross Power	375.0 hp ( 280 kw )
Gross Power - SAE J1995	375.0 hp ( 280 kw )
Max Torque	1,579.0 lbs ft ( 2,141 nm )
Net Power	367.0 hp ( 274 kw )
Net Power - ISO 14396	370.0 hp ( 276 kw )
Net Power - SAE J1349	367.0 hp ( 274 kw )
No Engine De-rating Required Below	12,500.0 ft ( 3,810 m )
Peak Engine Torque Gross (SAE J1995)	1,579.0 lbs ft ( 2,141 nm )
Peak Engine Torque Net (ISO 14396)	1,564.0 lbs ft ( 2,120 nm )
Peak Engine Torque Speed	1,200.0 rpm
Stroke	6.2 in ( 16 cm )
Torque Measured @	1,200.0 rpm
Operating Specifications
Cooling System Fluid Capacity	21.9 gal ( 83 l )
Fuel Capacity	108.8 gal ( 412 l )
Hydraulic System Fluid Capacity	29.1 gal ( 110 l )
Transmission Fluid Capacity	9.2 gal ( 35 l )
Operating Weights
Center Axle - Empty	10,384.0 lbs ( 4,710 kg )
Center Axle - Loaded	37,633.0 lbs ( 17,070 kg )
Center Axle - Rated Load	27,249.0 lbs ( 12,360 kg )
Front Axle - Empty	33,091.0 lbs ( 15,010 kg )
Front Axle - Loaded	40,322.0 lbs ( 18,290 kg )
Front Axle - Rated Load	7,231.0 lbs ( 3,280 kg )
Rear Axle - Empty	9,656.0 lbs ( 4,380 kg )
Rear Axle - Loaded	36,905.0 lbs ( 16,740 kg )
Rear Axle - Rated Load	27,249.0 lbs ( 12,360 kg )
Total - Empty	53,131.0 lbs ( 24,100 kg )
Total - Loaded	114,860.0 lbs ( 52,100 kg )
Total - Rated Load	61,729.0 lbs ( 28,000 kg )
Service Refill Capacities
Cooling System	21.9 gal ( 83 l )
DEF Tank (ISO 2224-1)	5.3 gal ( 20 l )
Engine Crankcase	10.5 gal ( 40 l )
Final Drives/Differential	35.7 gal ( 135 l )
Fuel Tank	108.8 gal ( 412 l )
Hydraulic System	29.1 gal ( 110 l )
Output Transfer Gear Box	6.3 gal ( 24 l )
Transmission	9.2 gal ( 35 l )
Sound Levels
Interior Cab	76 dB(A)
Standards
Brakes	ISO 3450 - 2011
Cab - FOPS	ISO 3449 Level II - 2005
Cab - ROPS	ISO 3471 - 2008
Steering	ISO 5010 - 2007
Steering System
Lock to Lock	4.75 seconds @ 60 rpm
Transmission
Forward - 1	5.0 mph ( 8 kph )
Forward - 2	9.0 mph ( 14 kph )
Forward - 3	14.0 mph ( 23 kph )
Forward - 4	21.0 mph ( 34 kph )
Forward - 5	29.0 mph ( 47 kph )
Forward - 6	34.0 mph ( 55 kph )
Number of Forward Gears	6.0
Number of Reverse Gears	1.0
Reverse - 1	6.0 mph ( 10 kph )
Turning Circle
Turning Dimensions - Aisle Width	210.0 in ( 533 cm )
Turning Dimensions - Clearance Radius	318.0 in ( 808 cm )
Turning Dimensions - Inside Radius	153.0 in ( 389 cm )
Turning Dimensions - SAE Turning Radius	294.0 in ( 747 cm )
Turning Dimensions - Steer Angle - Left/Right	45 deg
Weights
Center Axle - empty	10,384.0 lbs ( 4,710 kg )
Center Axle - loaded	27,249.0 lbs ( 12,360 kg )
Front Axle - empty	33,091.0 lbs ( 15,010 kg )
Front Axle - loaded	7,231.0 lbs ( 3,280 kg )
Rear Axle - empty	9,656.0 lbs ( 4,380 kg )
Rear Axle - loaded	27,249.0 lbs ( 12,360 kg )
Total Empty	53,131.0 lbs ( 24,100 kg )
Total Loaded	61,729.0 lbs ( 28,000 kg )

Dealer Contact Info:

The Nice Company

The Nice Company Dealer Info

The Nice Company Website

Click here to email The Nice Company.

Fax: 508-966-4887

Contact: Bryn Smith

Click for Phone Number

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon