Equipment ↠ Caterpillar ↠ Off-Highway Trucks ↠ THIS Caterpillar 740GC

Caterpillar 740GC

Name: Caterpillar 740GC
Brand: Caterpillar
Price: 399800 USD
Availability: OutOfStock

❮

❯

MACHINE SOLD

Yancey Bros. Co.

Yancey Bros. Co. Dealer Info

Yancey Bros. Co. Website

Click here to email Yancey Bros. Co..

Contact: Yancey Used Equipment Team

Click for Phone Number

Machine Info:

Hours:	5733
Serial Number:	3T800361
Machine Location:	ALBANY, GA
More Information:	https://catused.com/cu/10116247

Description:

Air Conditioner, Air Suspension Seat, Automatic Electronic Traction Aid, Beacon, Bed Type - Standard, Cycle Counter, Emissions Level - EPA - EPA TIER 4f, Lighting, Mirrors, Product Link, Radio - Bluetooth, Rear View Camera, Regulatory Status - EPA / ARB / S. Korea, ROPS - Enclosed, Tailgate, Tier 1 Compliant, Tier 2 Compliant, Ultra Low Sulfur Diesel Fuel

Machine Details:

GENERAL APPEARANCE
Cleaning Required	Yes
S.O.S. Taken	Yes
SAFETY ITEMS
ROPS	Yes
ROPS Certification Plate	Yes
OPERATOR STATION
Current O&MM	Yes
Current Parts Manual	No
Current Safety Manual	Yes
ENGINE
Blow By	No
Compression in Radiator	No
Fluid Levels OK?	Yes
Knocking	No
Oil Leaks	No
Water in Oil	No
COOLING SYSTEM
Leaks - COOLING SYSTEM	No
ELECTRICAL, STARTING AND CHARGING SYSTEM
Block Heater	No
Ether Aid	No
TRANSMISSION
Leaks - TRANSMISSION	No
Transmission - Noisy	No
STEERING
Hand Metering Unit	Good
Lines / Fittings - STEERING	Good
Steering Cylinder	Good
Steering Linkage	Good
SUSPENSION
Suspension Cylinders	Good
BRAKE
Leaks - BRAKE	No
HYDRAULICS
Leaks - HYDRAULICS	No
TRUCK BODY
Bottom	Good
Hinge Pins & Brackets	Good
Operating Condition - TRUCK BODY	Good
Ribs and Stringers	Good
Spill Guard	Good
Tailgate	Good
FINAL DRIVES
Center Axle	Good
Center Final Drives	Good
Front Axle - FINAL DRIVES	Good
Front Final Drives	Good
Rear Axle	Good
Rear Final Drives	Good
Universal Joints	Good
Wheel Lugs & Rims	Good
TIRES
Leaks - HYDRAULICS	Tires are almost brand new.
Leaks - HYDRAULICS	29.5R25

From the manufacturer:

Supplied by HeavyEquipmentData.com →

BODY CAPACITIES
Heaped (SAE 2:1)	29.7 cu yd ( 23 cu m )
Struck	22.2 cu yd ( 17 cu m )
Tailgate Heaped SAE 2:1	31.9 cu yd ( 24 cu m )
Tailgate Struck	23.4 cu yd ( 18 cu m )
BODY HOIST
Lower Time	12 s
Raise Time	12 s
BODY PLATE
Type	High strength Brinell HB450 wear resistant steel
BODY PLATE THICKNESS
Base Plate	0.5 in ( 1 cm )
Front Plate	0.3 in ( 1 cm )
Side Plates	0.4 in ( 1 cm )
ENGINE
Bore	5.4 in ( 14 cm )
Displacement	926.0 cu in ( 15,174 cu cm )
Emissions	Meets Tier 4 Final and Stage V standards
Engine Model	Cat® C15
Engine Model - U.S. EPA Tier 4 Final/EU Stage V	Cat C15
Gross Power - SAE J1995	452.0 hp ( 337 kw )
Net Power - ISO 14396	447.0 hp ( 333 kw )
Net Power - SAE J1349	439.0 hp ( 327 kw )
No Engine De-rating Below	10,000.0 ft ( 3,048 m )
Peak Engine Torque Gross (SAE J1995)	1,711.0 lbs ft ( 2,320 nm )
Peak Engine Torque Net (SAE J1349)	1,670.0 lbs ft ( 2,264 nm )
Peak Engine Torque Speed	1200 r/min
Stroke	6.8 in ( 17 cm )
NOTES
Note (1)	References to emission standards
Note (2)	Power ratings at 1,700 rpm
Note (3)	Power available at the flywheel
Note (4)	Net power at max fan speed is 327 kW (439 hp)
Note (5)	DEF must meet ISO 22241-1 standard
OPERATING WEIGHTS
Total - Empty	71,377.0 lbs ( 32,376 kg )
Total - Loaded	151,405.0 lbs ( 68,676 kg )
Total - Rated Load	80,027.0 lbs ( 36,300 kg )
SERVICE REFILL CAPACITIES
Cooling System	23.7 gal ( 90 l )
DEF Tank	6.5 gal ( 25 l )
Engine Crankcase	13.7 gal ( 52 l )
Fuel Tank	145.3 gal ( 550 l )
Transmission - OTG	19.8 gal ( 75 l )
SOUND LEVELS
Interior Cab	72 dB(A)
STANDARDS
Brakes	ISO 3450 – 2011
Cab - FOPS	ISO 3449 Level II – 2005
STEERING
Lock to Lock	4.75 seconds @ 60 rpm
TRANSMISSION
Forward - 1	4.0 mph ( 6 kph )
Forward - 2	5.3 mph ( 9 kph )
Forward - 3	7.3 mph ( 12 kph )
Forward - 4	9.2 mph ( 15 kph )
Forward - 5	12.2 mph ( 20 kph )
Forward - 6	14.9 mph ( 24 kph )
Forward - 7	20.6 mph ( 33 kph )
Forward - 8	24.7 mph ( 40 kph )
Forward - 9	35.7 mph ( 57 kph )
Reverse - 1	4.2 mph ( 7 kph )
Reverse - 2	9.8 mph ( 16 kph )
TURNING CIRCLE
Note	Dimensions are for machines equipped with 29.5 R25 tires.
Turning Dimensions - Aisle Width	220.0 in ( 559 cm )
Turning Dimensions - Clearance Radius	330.0 in ( 838 cm )
Turning Dimensions - Inside Radius	156.0 in ( 396 cm )
Turning Dimensions - SAE Turning Radius	303.0 in ( 770 cm )
Turning Dimensions - Steer Angle - Left/Right	45°
WEIGHTS
Rated Payload	40.0 t ( 40,000 kg )

Dealer Contact Info:

Yancey Bros. Co.

Yancey Bros. Co. Dealer Info

Yancey Bros. Co. Website

Click here to email Yancey Bros. Co..

Fax: 229-434-1510

Contact: Yancey Used Equipment Team

Click for Phone Number

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon