Equipment ↠ Caterpillar ↠ Off-Highway Trucks ↠ THIS 2016 Caterpillar 745C

2016 Caterpillar 745C

Name: 2016 Caterpillar 745C
Brand: Caterpillar
Price: 269500 USD
Availability: OutOfStock

❮

❯

MACHINE SOLD

This machine is available to rent.

Trophy Tractor, Inc.

Trophy Tractor, Inc. Dealer Info

Trophy Tractor, Inc. Website

Click here to email Trophy Tractor, Inc..

Contact: Jeff Miller

Click for Phone Number

Machine Info:

Serial Number:	TFK00999
Stock Number:	11644
Machine Location:	GRAND PRAIRIE, TX

Description:

Features: EROPS, Heat & Air, Retarder, 29.5R25 Tires, Good Condition, Warranty,, Condition,, General,, Appearance :, Good,, Articulation :, Good,, Bed :, Good,, Cab :, Good,, Electrical System :, Good,, Frame :, Good,, General Condition :, Good,, Hydraulic System :, Good, , Power Train,, Brakes Front :, Good,, Brakes Rear :, Good,, Differential(F) :, Good,, Differential(R) :, Good,, Engine :, Good,, Planetaries(L) :, Good,, Planetaries(R) :, Good,, Torque Conv. :, Good,, Transmission :, Rebuild done at 3794 hours,, Tires,, Tire Size :, 29.5R25,, Tires Front :, 70%,, Tires Rear :, 80%

From the manufacturer:

Supplied by HeavyEquipmentData.com →

Body Capacities
Heaped (SAE 2:1)	32.7 cu yd ( 25 cu m )
Struck	24.2 cu yd ( 19 cu m )
Tailgate Heaped SAE 2:1	34.7 cu yd ( 27 cu m )
Tailgate Struck	25.5 cu yd ( 20 cu m )
Body Hoist
Lower Time	8.0 seconds
Raise Time	12.0 seconds
Body Plate
Body Plate Type	High strength Brinell HB450 wear resistant steel
Dump
Capacity - Heaped	32.7 cu yd ( 25 cu m )
Capacity - Struck	24.2 cu yd ( 19 cu m )
Lower Time	8.0 seconds
Raise Time	12.0 seconds
Engine
Bore	5.7 in ( 14 cm )
Displacement	1,106.0 cu in ( 0 cu m )
Engine Model	Cat C18 ACERT
Engine Model - U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final)/Korea Tier 4 Final	Cat C18 ACERT
Gross Power	511.0 hp ( 381 kw )
Gross Power - SAE J1995	511.0 hp ( 381 kw )
Net Power	496.0 hp ( 370 kw )
Net Power - ISO 14396	504.0 hp ( 376 kw )
Net Power - SAE J1349	496.0 hp ( 370 kw )
No Engine De-rating Required Below	10,000.0 ft ( 3,048 m )
Peak Engine Torque Gross (SAE J1995)	1,931.0 lbs ft
Peak Engine Torque Net (SAE J1349)	1,887.0 lbs ft
Peak Engine Torque Speed	1,200.0 rpm
Stroke	7.2 in ( 18 cm )
Torque Measured @	1,200.0 rpm
Operating Specifications
Cooling System Fluid Capacity	23.7 gal ( 90 l )
Fuel Capacity	145.3 gal ( 550 l )
Hydraulic System Fluid Capacity	36.9 gal ( 140 l )
Transmission Fluid Capacity	19.8 gal ( 75 l )
Operating Weights
Center Axle - Empty	15,300.0 lbs ( 6,940 kg )
Center Axle - Loaded	53,991.0 lbs ( 24,490 kg )
Center Axle - Rated Load	38,691.0 lbs ( 17,550 kg )
Front Axle - Empty	43,585.0 lbs ( 19,770 kg )
Front Axle - Loaded	56,593.0 lbs ( 25,670 kg )
Front Axle - Rated Load	13,007.0 lbs ( 5,900 kg )
Rear Axle - Empty	14,749.0 lbs ( 6,690 kg )
Rear Axle - Loaded	53,440.0 lbs ( 24,240 kg )
Rear Axle - Rated Load	38,691.0 lbs ( 17,550 kg )
Total - Empty	73,634.0 lbs ( 33,400 kg )
Total - Loaded	164,024.0 lbs ( 74,401 kg )
Total - Rated Load	90,389.0 lbs ( 41,000 kg )
Service Refill Capacities
Axles - Each	15.8 gal ( 60 l )
Brake Cooling Tank	17.7 gal ( 67 l )
Cooling System	23.7 gal ( 90 l )
DEF Tank	6.6 gal ( 25 l )
Engine Crankcase	13.7 gal ( 52 l )
Final Drive - Each	1.3 gal ( 5 l )
Fuel Tank	145.3 gal ( 550 l )
Steering/Hoist Hydraulic System	36.9 gal ( 140 l )
Transmission - OTG	19.8 gal ( 75 l )
Sound Levels
Interior Cab	79 dB(A)
Standards
Brakes	ISO 3450 2011
Cab - FOPS	ISO 3449 Level II 2005
Cab - ROPS	ISO 3471 2008
Steering	ISO 5010 2007
Steering System
Lock to Lock	4.8 seconds @ 60 rpm
Transmission
Forward - 1	3.8 mph ( 6 kph )
Forward - 2	5.0 mph ( 8 kph )
Forward - 3	7.0 mph ( 11 kph )
Forward - 4	8.8 mph ( 14 kph )
Forward - 5	11.6 mph ( 19 kph )
Forward - 6	14.2 mph ( 23 kph )
Forward - 7	19.6 mph ( 32 kph )
Forward - 8	23.5 mph ( 38 kph )
Forward - 9	34.0 mph ( 55 kph )
Number of Forward Gears	9.0
Number of Reverse Gears	2.0
Reverse - 1	4.0 mph ( 6 kph )
Reverse - 2	9.1 mph ( 15 kph )
Turning Circle
Turning Dimensions - Aisle Width	235.0 in ( 597 cm )
Turning Dimensions - Clearance Radius	358.0 in ( 909 cm )
Turning Dimensions - Inside Radius	174.0 in ( 442 cm )
Turning Dimensions - SAE Turning Radius	340.0 in ( 864 cm )
Weights
Center Axle - empty	15,300.0 lbs ( 6,940 kg )
Center Axle - loaded	53,991.0 lbs ( 24,490 kg )
Front Axle - empty	43,585.0 lbs ( 19,770 kg )
Front Axle - loaded	56,593.0 lbs ( 25,670 kg )
Rear Axle - empty	14,749.0 lbs ( 6,690 kg )
Rear Axle - loaded	53,440.0 lbs ( 24,240 kg )
Total Empty	73,634.0 lbs ( 33,400 kg )
Total Loaded	90,389.0 lbs ( 41,000 kg )
Wheel Base Length
Long Wheel Base	228.4 in ( 580 cm )
Standard Wheel Base	180.7 in ( 459 cm )

Dealer Contact Info:

Trophy Tractor, Inc.

Trophy Tractor, Inc. Dealer Info

Trophy Tractor, Inc. Website

Click here to email Trophy Tractor, Inc..

Fax: 972-264-6720

Contact: Jeff Miller

Click for Phone Number

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon