Create a CEG Account  /  CEG Login

Caterpillar 775F For Sale in Harrisburg, PA


/ Save to Watch List

For Sale: Call for Price





Machine Info:

Hours:40095
Serial Number:DLS00393
Machine Location:HARRISBURG, PA
More Information:https://catused.com/cu/10275971

Description:

Air Conditioner, Automatic Electronic Traction Aid, Emissions Level - EPA - EPA Tier 2, Fast Fill Fuel, Lighting, Mirrors, Online Owner's Manual , Product Link, Radio - AM FM Radio, Regulatory Marking, Regulatory Status - EPA / CARB, Retarder, Starter Type - Electric, Tier 1 Compliant, Tier 2 Compliant, Ultra Low Sulfur Diesel Fuel

Machine Details:

GENERAL CONDITION
ET Download AvailableYes
Machine Starts and is OperableYes
S.O.S. (All Compartments)No
Tires are Aired Up and DrivableYes
VIDS/VIMS Download AvailableNo
GENERAL APPEARANCE
S.O.S. TakenNo
SAFETY ITEMS
Back Up Alarm FunctioningYes
Brakes FunctioningYes
ROPSYes
Safety Decals In PlaceYes
Safety Decals LegibleYes
OPERATOR STATION
Back Up AlarmYes
Current O&MMYes
Current Parts ManualYes
Current Safety ManualYes
ROPS Certification PlateYes
ENGINE
Apparent Other Engine DamageNo
Blow ByNo
Compression in RadiatorNo
Engine Oil Level FullYes
Fluid Levels OK?Yes
Fuel LeaksNo
KnockingNo
Oil filter Cut and InspectedNo
Oil LeaksNo
Water in OilNo
COOLING SYSTEM
Leaks - COOLING SYSTEMNo
Leaks - COOLING SYSTEM 1No
Oil in Anti-FreezeNo
ELECTRICAL, STARTING AND CHARGING SYSTEM
Block HeaterNo
Ether AidNo
TORQUE CONVERTER
Magnetic Screens InspectedYes
TRANSMISSION
Leaks - TRANSMISSIONNo
Mag Screens CheckedYes
Transmission - NoisyNo
STEERING
AccumulatorsGood
Arm Center (Steering Linkage)Good
Front AxleGood
Pivot P & B TrunnionsGood
Steering CylinderFair
Steering Gear BoxGood
Steering LinkageGood
Steering TankGood
Steering Valves / PumpsGood
Suspension CylindersGood
Tie Rods / Rod EndsGood
Torsion Rods - STEERINGGood
BRAKE
Automatic Retarder SystemYes
AXLE ASSEMBLIES
Automatic Retarder SystemLeft rear suspension strut has nut welded on pin retainer bolt.
TRUCK BODY & CYLINDERS
Body Side WallsGood
Hinge Pins and BushingsGood
Hydraulic Hoses - TRUCK BODY & CYLINDERSGood
Lift Cylinders - TRUCK BODY & CYLINDERSGood
Mounting BracketsGood
Rock Kickers / Flaps - TRUCK BODY & CYLINDERSGood
HYDRAULICS
Leaks - HYDRAULICSNo
TRUCK BODY
Hinge Pins & BracketsGood
Rock Kickers / Flaps - TRUCK BODYGood
FINAL DRIVES
Differential - FINAL DRIVESGood
Rear AxleGood
Rear Final DrivesGood
Torsion Rods - FINAL DRIVESGood
Wheel Lugs & Rims - FINAL DRIVESGood
TIRES
SpareNo
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
SpareRight inner wheel missing cover plate for tire stem tube, and tube is missing fill valve.
SpareLeft inner wheel is missing fill valve on tire stem tube.


From the manufacturer:

Supplied by HeavyEquipmentData.com →

Approximate Weights - Dual Slope
Gross Weight - Empty 154,000 lbs (69,853 kg)
Approximate Weights - Flat Floor
Body 29,665 lbs (13,456 kg)
Chassis 35 lbs (16 kg)
Articulating/Rigid
Articulating/Rigid Rigid
Body Hoists
Body Lower Time - Float 13 seconds
Body Power Down - High Idle 31 degrees
Body Raise Time - High Idle 10 seconds
Pump Flow - High Idle 148 gpm (560 lpm)
Relief Valve Setting - Raise 2,750 psi
Brakes
Brake Surface - Rear 9,497 cu in (155,628 cu cm)
Standards 3.64:1
Dimensions
Centerline Front Tire Width 11 ft (3 m)
Dump Ground Clearance 2 ft (1 m)
Dump Height 31 ft (9 m)
Front Canopy Height 15 ft (4 m)
Ground Clearance 3 ft (1 m)
Inside Body Length 20 ft (6 m)
Loading Height - Empty 13 ft (4 m)
Operating Width 17 ft (5 m)
Outside Body Width 14 ft (4 m)
Overall Height 15 ft (4 m)
Overall Height - Body Raised 31 ft (9 m)
Overall Length 34 ft (10 m)
Overall Width 18 ft (5 m)
Wheel Base 14 ft (4 m)
Wheelbase 14 ft (4 m)
DRIVE SYSTEM
Drive Config 4x2
Dump
Load Capacity - heaped 55 cu yd (42 cu m)
Load Capacity - Struck 42 cu yd (32 cu m)
Lower Time 13 seconds
Raise Time 10 seconds
Engine
Aspiration Turbocharged
Bore 5 in (14 cm)
Displacement 1,649 cu in (27,022 cu cm)
Engine Model Cat C27 ACERT
Flywheel Power 740 hp (552 kw)
Gross Power 787 hp (587 kw)
Gross Power - SAE J1995 787 hp (587 kw)
Make Cat
Max Torque 2,582 lbs ft (3,501 nm)
Net Power 740 hp (552 kw)
Net Power - 80/1269/EEC 740 hp (552 kw)
Net Power - Cat 740 hp (552 kw)
Net Power - ISO 9249 740 hp (552 kw)
Net Power - SAE J1349 740 hp (552 kw)
Number of Cylinders 12
Peak Torque 2,582 lbs ft (3,501 nm)
Power Measured @ 2,000 rpm
Stroke 6 in (15 cm)
Torque Measured @ Turbocharged rpm
Final Drives
Planetary Ratio 4.80:1
Total Reduction Ratio 17.49:1
Operating Specifications
Alternator Supplied Amperage Gear
Body Capacity - SAE 2:1 55 cu yd (42 cu m)
Brake/Hoist System Fluid Capacity 81 gal (307 l)
Cooling System Fluid Capacity 46 gal (174 l)
Diff and Final Drive Fluid Capacity 41 gal (155 l)
Engine Oil Capacity 19 gal (72 l)
Fuel Capacity 185 gal (700 l)
Lower Time 13 seconds
Maximum Capacity 140,000 lbs (63,503 kg)
Nominal Payload Capacity 41 lbs (19 kg)
Nominal Payload Class (100%) 140,000 lbs (63,503 kg)
Not to Exceed Payload (120%)* 168,000 lbs (76,204 kg)
Raise Time 10 seconds
Steer Angle 77 degrees
Steering System Fluid Capacity 16 gal (61 l)
Tire Size 24.00R35(E4)
Top Speed - Loaded 42 mph (67 kph)
ROPS
ROPS Standards ANSI/SAE J1166 MAY90.
Service Refill Capacities
Brake / Hoist / Fan Hydraulic Tank 35 gal (132 l)
Brake Hoist System - Includes Tank 81 gal (307 l)
Brake/Hoist Hydraulic Tank 140,000 gal (529,900 l)
Cooling System 46 gal (174 l)
Crankcase 25 gal (95 l)
Fuel Tank 185 gal (700 l)
Steering System - Including Tank 16 gal (61 l)
Steering Tank 9 gal (34 l)
Torque Converter - Transmission System - Including Sump 19 gal (72 l)
Sound
Sound Standards ANSI/SAE J1166 MAY90.
Steering System
Steering Standards SAE J1511 OCT90 ISO 5010: 1992
Suspension
Effective Cylinder Stroke - Rear 6 in (15 cm)
Tires
Standard Tire 24.00R35 (E4)
Standard Tires 216
Transmission
Forward - 1 7 mph (11 kph)
Forward - 2 9 mph (15 kph)
Forward - 3 13 mph (20 kph)
Forward - 4 17 mph (27 kph)
Forward - 5 23 mph (37 kph)
Forward - 6 31 mph (50 kph)
Forward - 7 42 mph (67 kph)
Max Speed 42 mph (67 kph)
Number of Gears - Forward 7
Number of Gears - Reverse 1
Reverse 9 mph (14 kph)
Weights
Empty Weight 105,831 lbs (48,004 kg)
Front Axle - Loaded 33%
Loaded Weight 242,001 lbs (109,770 kg)
Operating Weight 42,000 lbs (19,051 kg)
Operating Weight - Loaded SAE J1511 OCT90 ISO 5010: 1992 lbs
Rear Axle - Empty 51%
Rear Axle - Loaded 67%
Weight Distribution Front - empty 49%
Weight Distribution Front - loaded 33%
Weight Distribution Rear - empty 51%
Weight Distribution Rear - loaded 67%

Dealer Contact Info:

Cleveland Brothers



Contact: Erin Westbrook

Click for Phone Number


Request an equipment inspection
Get shipping quotes




Log In to Your CEG Account







×

Stay Ahead of the Market

Get weekly equipment news, auction updates, and dealer insights — trusted by thousands of industry professionals.



39.96118 \\ -82.99879 \\ Columbus \\ OH \\ US \\ 43215