| Articulating/Rigid |
| Articulating/Rigid | Articulated |
| Body Capacities |
| Heaped (SAE 2:1) | 25.8 cu yd ( 20 cu m ) |
| Struck | 19.0 cu yd ( 15 cu m ) |
| Tailgate Heaped SAE 2:1 | 27.3 cu yd ( 21 cu m ) |
| Tailgate Struck | 19.9 cu yd ( 15 cu m ) |
| Body Hoist |
| Lower Time | 7.0 seconds |
| Raise Time | 11.0 seconds |
| Body Plate |
| Body Plate Type | High strength Brinell HB450 wear resistant steel |
| Body Plate Thickness |
| Base | 0.6 in ( 2 cm ) |
| Front | 0.4 in ( 1 cm ) |
| Scow | 0.6 in ( 2 cm ) |
| Side | 0.5 in ( 1 cm ) |
| Dimensions |
| Dump Ground Clearance | 2.1 ft ( 1 m ) |
| Dump Height | 22.9 ft ( 7 m ) |
| Ground Clearance | 1.8 ft ( 1 m ) |
| Overall Height | 12.2 ft ( 4 m ) |
| Overall Length | 35.8 ft ( 11 m ) |
| Overall Width | 11.1 ft ( 3 m ) |
| Wheelbase | 17.2 ft ( 5 m ) |
| DRIVE SYSTEM |
| Drive Config | 6x6 |
| Dump |
| Capacity - Heaped | 25.8 cu yd ( 20 cu m ) |
| Capacity - Struck | 19.3 cu yd ( 15 cu m ) |
| Lower Time | 7.0 seconds |
| Raise Time | 11.0 seconds |
| Rated Payload | 72,091.2 lbs ( 32,700 kg ) |
| Engine |
| Aspiration | Turbocharged |
| Bore | 5.4 in ( 14 cm ) |
| Displacement | 926.0 cu in ( 15,174 cu cm ) |
| Engine Model | Cat C15 ACERT |
| Engine Model - U.S. EPA Tier 4 Final/EU Stage IV | Cat C13 ACERT |
| Flywheel Power | 385.0 hp ( 287 kw ) |
| Gross Power | 413.0 hp ( 308 kw ) |
| Gross Power - SAE J1995 | 435.0 hp ( 324 kw ) |
| Make | Cat |
| Max Torque | 1,524.6 lbs ft ( 2,067 nm ) |
| Model | 3408E ATAAC |
| Net Power | 394.0 hp ( 294 kw ) |
| Net Power - EEC 80/1269 | 424.0 hp ( 316 kw ) |
| Net Power - ISO 14396 | 429.0 hp ( 320 kw ) |
| Net Power - ISO 9249 | 424.0 hp ( 316 kw ) |
| Net Power - SAE J1349 | 419.0 hp ( 312 kw ) |
| Number of Cylinders | 6.0 |
| Peak Engine Torque Gross (SAE J1995) | 1,614.0 lbs ft ( 2,188 nm ) |
| Peak Engine Torque Net (SAE J1349) | 1,597.0 lbs ft ( 2,165 nm ) |
| Peak Engine Torque Speed | 1,200.0 rpm |
| Stroke | 6.8 in ( 17 cm ) |
| Torque Measured @ | 1,200.0 rpm |
| Operating Specifications |
| Cooling System Fluid Capacity | 21.2 gal ( 80 l ) |
| Engine Oil Capacity | 10.1 gal ( 38 l ) |
| Fuel Capacity | 148.0 gal ( 560 l ) |
| Hydraulic System Fluid Capacity | 61.6 gal ( 233 l ) |
| Tire Size | 26.5R25 |
| Transmission Fluid Capacity | 19.1 gal ( 72 l ) |
| Operating Weights |
| Center Axle - Empty | 14,406.0 lbs ( 6,534 kg ) |
| Center Axle - Loaded | 46,743.0 lbs ( 21,202 kg ) |
| Center Axle - Rated Load | 32,337.0 lbs ( 14,668 kg ) |
| Front Axle - Empty | 41,881.0 lbs ( 18,997 kg ) |
| Front Axle - Loaded | 49,298.0 lbs ( 22,361 kg ) |
| Front Axle - Rated Load | 7,417.0 lbs ( 3,364 kg ) |
| Rear Axle - Empty | 12,919.0 lbs ( 5,860 kg ) |
| Rear Axle - Loaded | 45,256.0 lbs ( 20,528 kg ) |
| Rear Axle - Rated Load | 32,337.0 lbs ( 14,668 kg ) |
| Total - Empty | 69,206.0 lbs ( 31,391 kg ) |
| Total - Loaded | 141,297.0 lbs ( 64,091 kg ) |
| Total - Rated Load | 72,091.0 lbs ( 32,700 kg ) |
| Service Refill Capacities |
| Cooling System | 25.1 gal ( 95 l ) |
| DEF Tank | 5.3 gal ( 20 l ) |
| Engine Crankcase | 10.6 gal ( 40 l ) |
| Final Drives/Differential | 21.1 gal ( 80 l ) |
| Fuel Tank | 148.0 gal ( 560 l ) |
| Hydraulic System | 86.6 gal ( 328 l ) |
| Output Transfer Gear Box | 6.3 gal ( 24 l ) |
| Transmission | 22.5 gal ( 85 l ) |
| Sound Levels |
| Interior Cab | 79 dB(A) |
| Standards |
| Brakes | SAE J/ISO 3450-1998 |
| Cab - FOPS | SAE J231 JAN81 and ISO 3449-1992 Level II |
| Cab - ROPS | SAE J1040 May 1994 and ISO 3471-1994 |
| Steering | ISO 5010 1992E |
| Steering System |
| Lock to Lock | 4.75 seconds @ 60 rpm |
| Transmission |
| Forward - 1 | 5.2 mph ( 8 kph ) |
| Forward - 2 | 7.1 mph ( 11 kph ) |
| Forward - 3 | 9.6 mph ( 15 kph ) |
| Forward - 4 | 12.9 mph ( 21 kph ) |
| Forward - 5 | 17.5 mph ( 28 kph ) |
| Forward - 6 | 23.5 mph ( 38 kph ) |
| Forward - 7 | 31.9 mph ( 51 kph ) |
| Max Speed | 36.3 mph ( 58 kph ) |
| Number of Forward Gears | 8.0 |
| Number of Reverse Gears | 1.0 |
| Reverse - 1 | 5.0 mph ( 8 kph ) |
| Reverse - 2 | 6.8 mph ( 11 kph ) |
| Turning Circle |
| Turning Dimensions - Aisle Width | 212.0 in ( 538 cm ) |
| Turning Dimensions - Clearance Radius | 318.0 in ( 808 cm ) |
| Turning Dimensions - Inside Radius | 149.0 in ( 378 cm ) |
| Turning Dimensions - SAE Turning Radius | 294.0 in ( 747 cm ) |
| Weights |
| Center Axle - empty | 14,087.6 lbs ( 6,390 kg ) |
| Center Axle - loaded | 45,900.3 lbs ( 20,820 kg ) |
| Front Axle - empty | 40,014.0 lbs ( 18,150 kg ) |
| Front Axle - loaded | 48,479.7 lbs ( 21,990 kg ) |
| Operating Weight | 135,610.0 lbs ( 61,512 kg ) |
| Rear Axle - empty | 12,588.4 lbs ( 5,710 kg ) |
| Rear Axle - loaded | 44,401.2 lbs ( 20,140 kg ) |
| Total Empty | 66,689.9 lbs ( 30,250 kg ) |
| Total Loaded | 138,781.1 lbs ( 62,950 kg ) |
