| Bucket |
|
Bucket Capacities |
2 cu yd (1 cu m)
|
|
Bucket Capacities - ISO Coupler |
0.75-1.2 m3 |
|
Bucket Capacities - SSL Style Coupler |
1 - 2 cu yd (1 - 1 cu m)
|
|
General Purpose |
1.2 yd |
|
Light Material |
2 cu yd (1 cu m)
|
| Cab |
|
FOPS |
SAE J/ISO 3449 APR98 Level II ISO 3449 1992 Level II. |
|
ROPS |
SAE J1040 MAY94 ISO 3471-1994. |
| Cab Features - Canopy |
|
External Knock Back Mirrors |
Standard |
|
Lockable Storage Box |
Standard |
| Dimensions - With ISO Coupler - Approximate |
|
Dig Depth |
4 in (9 cm)
|
|
Turning Radius - Inside Tire |
7 ft (2 m)
|
|
Turning Radius - Over Bucket |
15 ft (4 m)
|
| Dimensions - With SSL Coupler - Approximate |
|
Dig Depth |
4 in (9 cm)
|
|
Turning Radius - Inside Tire |
7 ft (2 m)
|
|
Turning Radius - Over Bucket |
15 ft (4 m)
|
| Dimensions with Bucket (Approximate) - Standard Lift - With ISO Coupler |
|
Articulation Angle |
39 degrees |
|
Clearance - Bucket at 45 degrees * |
8 ft (2 m)
|
|
Clearance - Level Bucket** |
10 ft (3 m)
|
|
Departure Angle |
33 degrees |
|
Dig Depth** |
4 in (9 cm)
|
|
Dump Angle at Full Lift |
45 degrees |
|
Height - Bucket Pin** |
11 ft (3 m)
|
|
Height - Ground Clearance** |
1 ft (0 m)
|
|
Height - Ground to Cab** |
8 ft (2 m)
|
|
Length - Overall* |
18 ft (5 m)
|
|
Length - Wheel Base |
7 ft (2 m)
|
|
Machine Width |
6 ft (2 m)
|
|
Note (1) |
*Vary with bucket. |
|
Note (2) |
**Vary with tire. |
|
Note (3) |
Dimensions listed are for a machine configured with general purpose buckets bolt-on cutting edges 75 kg (165 lb) operator no air conditioner and Dunlop 405/70 SPT9 tires. |
|
Reach - Bucket at 45 degrees* |
2 ft (1 m)
|
|
Turning Radius - Inside of Tires |
7 ft (2 m)
|
|
Turning Radius - Over Bucket |
15 ft (4 m)
|
|
Width - Bucket |
6 ft (2 m)
|
|
Width - Tread Center |
5 ft (1 m)
|
| Dimensions with Bucket (Approximate) - Standard Lift - With SSL Coupler |
|
Articulation Angle |
39 degrees |
|
Clearance - Bucket at 45 degrees * |
8 ft (2 m)
|
|
Clearance - Level Bucket** |
10 ft (3 m)
|
|
Departure Angle |
33 degrees |
|
Dig Depth** |
4 in (11 cm)
|
|
Dump Angle at Full Lift |
45 degrees |
|
Height - Bucket Pin** |
11 ft (3 m)
|
|
Height - Ground Clearance** |
1 ft (0 m)
|
|
Height - Ground to Cab** |
8 ft (2 m)
|
|
Length - Overall* |
19 ft (6 m)
|
|
Length - Wheel Base |
7 ft (2 m)
|
|
Machine Width |
6 ft (2 m)
|
|
Reach - Bucket at 45 degrees* |
3 ft (1 m)
|
|
Turning Radius - Inside of Tires |
7 ft (2 m)
|
|
Turning Radius - Over Bucket |
15 ft (4 m)
|
|
Width - Bucket |
6 ft (2 m)
|
|
Width - Tread Center |
5 ft (1 m)
|
| Drive System |
|
Forward - High Range |
22 mph (35 kph)
|
|
Forward - Range 1 |
6 mph (10 kph)
|
|
Forward - Range 2 |
12 mph (19 kph)
|
|
Reverse - High Range |
22 mph (35 kph)
|
|
Reverse - Range 1 |
6 mph (10 kph)
|
|
Reverse - Range 2 |
12 mph (19 kph)
|
| Engine |
|
Bore |
4 in (9 cm)
|
|
Displacement |
201 cu in (3,294 cu cm)
|
|
Emissions |
*The Cat C3.3B DIT engine meets U.S. EPA Tier 4 Final/EU Stage IIIB emission standards or Tier 4 Interim/Stage IIIA equivalent emission standards. |
|
Engine Model |
Cat C3.3B DIT* |
|
Maximum Gross Power |
73 hp (54 kw)
|
|
Maximum Gross Power - ISO 14396 |
73 hp (54 kw)
|
|
Maximum Gross Power - ISO 14396 (DIN) |
74 hp (55 kw)
|
|
Maximum Gross Power - SAE J1995 |
74 hp (55 kw)
|
|
Maximum Gross Torque - ISO 14396 |
192 lbs ft (260 nm)
|
|
Maximum Net Power - ISO 9249 |
69 hp (51 kw)
|
|
Maximum Net Power - SAE J1349 |
68 hp (51 kw)
|
|
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 |
191 lbs ft (259 nm)
|
|
Maximum Net Torque - SAE J1349 |
189 lbs ft (256 nm)
|
|
Net Power |
74 hp (55 kw)
|
|
Note (5) |
The Cat C3.3B Tier 4 Final/Stage IIIB uses an active regeneration system which requires no operator interaction under normal conditions. |
|
Rated Net Power - 2,400 rpm - ISO 9249 (1977)/EEC 80/1269 |
74 hp (55 kw)
|
|
Rated Net Power - 2,400 rpm - SAE J1349 |
73 hp (54 kw)
|
|
Rated Net Power - 2,500 rpm - SAE J1349 |
68 hp (51 kw)
|
|
Stroke |
5 in (12 cm)
|
| General Specifications |
|
Breakout Force (Since 2021)
|
9,666 lbs ft (13,105 nm)
|
|
Bucket Capacity cu. yd. (cu m) (Since 2019)
|
1.0 - 2.0 (0.8 - 1.5) |
|
Bucket Capacity cu. yd. (cu m) (2020)
|
1.0 - 2.0 (0.8 - 1.5) |
|
Bucket Capacity cu. yd. (cu m) (Since 2021)
|
1.0 - 1.6 (.76 - 1.2) |
|
Bucket Capacity cu. yd. (cu m) (2022)
|
1.0 - 1.6 (.76 - 1.2) |
|
Engine (Since 2021)
|
C3.3B DIT |
|
Engine Power hp (kw) (Since 2019)
|
74 (55.2) |
|
Engine Power hp (kw) (2020)
|
74 (55.2) |
|
Engine Power hp (kw) (2021)
|
74 (55.2) |
|
Engine Power hp (kw) (2022)
|
74 (55.2) |
|
Engine type (Since 2019)
|
Cat C3.3B DIT |
|
Engine type (2020)
|
Cat C3.3B DIT |
|
Engine type (2021)
|
Cat C3.3B DIT |
|
Engine type (2022)
|
Cat C3.3B DIT |
|
Full-Turn Tipping Load (Since 2021)
|
7,061 lbs (3,203 kg)
|
|
Max Dump Height (Since 2021)
|
9 ft (3 m)
|
|
Max Dump Height ft. (m) (Since 2019)
|
7.7 (2.4) |
|
Max Dump Height ft. (m) (2020)
|
7.7 (2.4) |
|
Net Power (Since 2021)
|
74 hp (55 kw)
|
|
Operating Weight (Since 2019)
|
12,331 (5,593) |
|
Operating Weight (2019)
|
12,331 (5,593) |
|
Operating Weight (2019)
|
12,331 (5,593) |
|
Operating Weight (2020)
|
12,331 (5,593) |
|
Operating Weight (2020)
|
12,331 (5,593) |
|
Operating Weight (2020)
|
12,331 (5,593) |
|
Operating Weight (Since 2021)
|
12,252 lbs (5,557 kg)
|
|
Operating Weight (Since 2021)
|
12,331 (5,593) |
|
Operating Weight (2021)
|
12,331 (5,593) |
|
Operating Weight (2021)
|
12,331 (5,593) |
|
Operating Weight (2022)
|
12,331 (5,593) |
|
Operating Weight (2022)
|
12,331 (5,593) |
|
Operating Weight (2022)
|
12,331 (5,593) |
|
Rated Bucket Capacity (Since 2021)
|
2.Jan cu yd |
|
Tip Load (Since 2021)
|
7,507 (3,405) |
|
Tip Load (2022)
|
7,507 (3,405) |
|
Travel Speed
(Fwd/Rev) (Since 2021)
|
6 / 6 mph |
|
Travel Speed
(Fwd/Rev) (2022)
|
6 / 6 mph |
| Hydraulic System |
|
Hydraulic Cycle Time - Dump |
1 seconds |
|
Hydraulic Cycle Time - Lift |
5 seconds |
|
Hydraulic Cycle Time - Lower |
3 seconds |
|
Hydraulic Cycle Time - Rackback |
2 seconds |
|
Main Relief - 3rd Aux Flow |
3,400 psi |
|
Main Relief - 3rd Aux Flow: High Flow |
31 gpm (117 lpm)
|
|
Main Relief - 3rd Aux Flow: Standard |
20 gpm (76 lpm)
|
| Loader Hydraulic System |
|
3rd Function Maximum Working Pressure |
3,408 psi |
|
Boost Flow Maximum Pressure |
3,191 psi |
|
Hydraulic Cycle Time - 1,000 rpm - Dump, at Maximum Lift Height |
3 seconds |
|
Hydraulic Cycle Time - 1,000 rpm - Float Down, Maximum Lift to Ground Level |
3 seconds |
|
Hydraulic Cycle Time - 1,000 rpm - Raise, Ground Level to Maximum Lift |
10 seconds |
|
Hydraulic Cycle Time - 1,800 rpm - Dump, at Maximum Lift Height |
2 seconds |
|
Hydraulic Cycle Time - 1,800 rpm - Float Down, Maximum Lift to Ground Level |
3 seconds |
|
Hydraulic Cycle Time - 1,800 rpm - Raise, Ground Level to Maximum Lift |
6 seconds |
|
Hydraulic Cycle Time - 1,800 rpm - Total Cycle Time |
10 seconds |
|
Lift Cylinder, Double Acting - Bore Diameter |
3 in (8 cm)
|
|
Lift Cylinder, Double Acting - Rod Diameter |
2 in (5 cm)
|
|
Lift Cylinder, Double Acting - Stroke |
27 in (70 cm)
|
|
Maximum Flow - Implement Pump |
19 gpm (72 lpm)
|
|
Maximum Flow - Implement Pump - Auxiliary Function High Flow |
31 gpm (117 lpm)
|
|
Maximum Flow - Implement Pump - Auxiliary Function Standard Flow |
19 gpm (72 lpm)
|
|
Maximum Working Pressure - Implement Pump |
3,408 psi |
|
Relief Pressure - Tilt Cylinder Head |
4,496 psi |
|
Relief Pressure - Tilt Cylinder Rod |
2,756 psi |
|
Tilt Cylinder, Double Acting - Bore Diameter |
4 in (9 cm)
|
|
Tilt Cylinder, Double Acting - Rod Diameter |
2 in (6 cm)
|
|
Tilt Cylinder, Double Acting - Stroke |
16 in (42 cm)
|
| Maximum Material Densities - General Purpose Bucket |
|
Bucket Width |
74 in (188 cm)
|
|
Dump Height |
94 in (239 cm)
|
|
Rated Capacity |
1 cu yd (1 cu m)
|
| Maximum Material Densities - Light Material Bucket |
|
Bucket Width |
82 in (208 cm)
|
|
Dump Height |
90 in (229 cm)
|
|
Rated Capacity |
2 cu yd (1 cu m)
|
| Maximum Material Densities - Multi Purpose Bucket |
|
Bucket Width |
74 in (188 cm)
|
|
Dump Height |
97 in (246 cm)
|
|
Rated Capacity |
1 cu yd (1 cu m)
|
| Operating Specifications |
|
Clearance - Full Lift and 45 degrees Dump |
8 ft (3 m)
|
|
Full Turn Tipping Load |
7,507 lbs (3,405 kg)
|
|
Operating Weight |
12,346 lbs (5,600 kg)
|
|
Rated Bucket Capacity |
1 cu yd (1 cu m)
|
|
Reach - Full Lift and 45 degrees Dump |
2 ft (1 m)
|
|
Steering Articulation Angle - Each Direction |
39 degrees |
|
Tipping Load - Full Turn - ISO 14397-1 |
7,061 lbs (3,203 kg)
|
|
Tipping Load - Straight - ISO 14397-1 |
8,666 lbs (3,931 kg)
|
| Operating Specifications - ISO Coupler |
|
Breakout Force - Bucket |
11,689 lbs ft (15,848 nm)
|
|
Full Turn Static Tipping Load - Bucket |
9,970 lbs (4,522 kg)
|
|
Rack Back - Transport Position |
52 degrees |
|
Rated Bucket Capacity |
1 cu yd (1 cu m)
|
|
Rated Operating Load at Full Turn - Bucket |
3,986 lbs (1,808 kg)
|
|
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 1.25 Stability and 500 mm [20 in] Load Center) |
4,848 lbs (2,199 kg)
|
|
Straight Tipping Load - Bucket |
9,778 lbs (4,435 kg)
|
|
Tire Size |
405/70 R18 |
| Operating Specifications - SSL Coupler |
|
Breakout Force - Bucket |
9,442 lbs ft (12,801 nm)
|
|
Full Turn Static Tipping Load - Bucket |
7,507 lbs (3,405 kg)
|
|
Rack Back - Transport Position |
52 degrees |
|
Rated Bucket Capacity |
1 cu yd (1 cu m)
|
|
Rated Operating Load at Full Turn - Bucket |
3,754 lbs (1,703 kg)
|
|
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 1.25 Stability and 500 mm [20 in] Load Center) |
4,553 lbs (2,065 kg)
|
|
Straight Tipping Load - Bucket |
9,215 lbs (4,180 kg)
|
|
Tire Size |
405/70 R18 |
| Service Refill Capacities |
|
Cooling System |
4 gal (17 l)
|
|
Engine Crankcase |
3 gal (11 l)
|
|
Engine Oil |
3 gal (11 l)
|
|
Fuel Tank |
14 gal (52 l)
|
|
Hydraulic System |
19 gal (70 l)
|
|
Hydraulic Tank |
12 gal (46 l)
|
|
Transmission - Gear Box |
2 gal (8 l)
|
| Steering System |
|
Maximum Steering Torque - 0 degrees (Straight Machine) |
37,155 lbs ft (50,375 nm)
|
|
Maximum Steering Torque - 39 degrees (Full Turn) |
27,747 lbs ft (37,619 nm)
|
|
Maximum Working Pressure - Steering Pump |
3,191 psi |
|
Nominal Flow - Steering Pump |
12 gpm (45 lpm)
|
|
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left |
<6 turns |
|
Steering AC Cycle Times - Full Left to Full Right - 2,620 rpm |
3 seconds |
|
Steering Articulation Angle - Each Direction |
39 degrees |
|
Steering Cylinder, Double Acting - Bore Diameter |
3 in (8 cm)
|
|
Steering Cylinder, Double Acting - Rod Diameter |
1 in (4 cm)
|
|
Steering Cylinder, Double Acting - Stroke |
12 in (30 cm)
|
| Tires |
|
Note (1) |
*Standard tire. |
|
Note (2) |
Other tire choices available contact your Cat dealer for details. |
|
Note (3) |
In certain applications the loader's productive capabilities may exceed the tires' tonnes-km/h (ton-) capabilities. |
|
Note (4) |
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. |
|
Option (1) |
335/80 R18 XZSL Michelin |
|
Option (2) |
340/80 R18 AT-R Firestone |
|
Option (3) |
340/80 R18 XMCL Michelin |
|
Option (4) |
340/80 R18 TRI2 Nokian |
|
Option (5) |
340/80 R18 Bibload Michelin |
|
Option (6) |
405/70 R18 SPT9 Dunlop* |
|
Option (7) |
12.5/80 R18 Flexport |
| Travel Speeds |
|
High Speed |
22 mph (35 kph)
|
|
Speed 1 |
6 mph (10 kph)
|
|
Speed 2 |
12 mph (20 kph)
|
| Weights |
|
Operating Weight |
12,346 lbs (5,600 kg)
|
