Equipment ↠ Caterpillar ↠ Wheel Loaders ↠ THIS Caterpillar 928G

Dismantled Caterpillar 928G For Sale

Name: Caterpillar 928G
Brand: Caterpillar
Availability: InStock

For Sale: Call for Price

Utah Track & Welding Inc.

Utah Track & Welding Inc. Dealer Info

Utah Track & Welding Inc. Website

Click here to email Utah Track & Welding Inc..

Contact: Sam R. Oman

Click for Phone Number

Machine Info:

Serial Number:	DJD02225
Machine Location:	SALT LAKE CITY, UT

From the manufacturer:

Supplied by HeavyEquipmentData.com →

Axles
Axle Oscillation	11 deg
Bucket
Breakout Force	25,849.0 lbs ( 11,725 kg )
Bucket Capacities	3 - 3 cu yd ( 2 cu m )
Bucket Capacity - heaped	2.3 cu yd ( 2 cu m )
Bucket Width	8.4 ft ( 3 m )
Dump Clearance at Max Raise	9.5 ft ( 3 m )
Cab
FOPS	SAE J231 JAN81, ISO 3449-1992 Level II
ROPS	SAE J1040 MAY94, ISO 3471-1994
Dimensions
Bucket Pin Height - Maximum Lift	12.4 ft ( 4 m )
Carry Height	3.0 ft ( 1 m )
Centerline of Front Axle to Hitch	4.9 ft ( 1 m )
Digging Depth	3.4 in ( 9 cm )
Dump Angle at Maximum Lift	45 deg
Dump Clearance at Maximum Lift - 45 degrees	9.5 ft ( 3 m )
Ground Clearance	1.4 ft ( 0 m )
Height - Center of Axle	2.3 ft ( 1 m )
Height - Top of Cab	10.8 ft ( 3 m )
Height - Top of Hood	87.6 in ( 223 cm )
Height - Top of ROPS/FOPS	10.8 ft ( 3 m )
Length - Rear Axle to Bumper	6.4 ft ( 2 m )
Length with Bucket on Ground	23.9 ft ( 7 m )
Overall Height	16.4 ft ( 5 m )
Overall Height - Bucket Raised	16.4 ft ( 5 m )
Overall Length	23.1 ft ( 7 m )
Rack Back Angle - Carry	47.8 deg
Rack Back Angle - Maximum Lift	58 deg
Reach at Max Lift and Dump	3.1 ft ( 1 m )
Reach at Maximum Lift and 45 degrees Dump	3.0 ft ( 1 m )
Wheel Base	9.6 ft ( 3 m )
Wheel Base Length	9.6 ft ( 3 m )
Width - Over Tires	77.0 ft ( 23 m )
Width Over Tires	8.1 ft ( 2 m )
Engine
Bore	4.0 in ( 10 cm )
Displacement	366.0 cu in ( 0 cu m )
Engine Model	3116T
Net Power	125.0 hp ( 93 kw )
Rated Net Power	143.0 hp ( 107 kw )
Stroke	5.0 in ( 13 cm )
Hydraulic System
Dump Time	1.2 seconds
Lower Time	2.8 seconds
Raise Time	6.1 seconds
Loader Hydraulic System
Bore (1)	4.8 in ( 12 cm )
Bore (2)	5.0 in ( 13 cm )
Dump	1.2 seconds
Lower, Empty, Float Down	2.8 seconds
Pump Flow - Implement Pump	40.2 gpm ( 152 lpm )
Raise	6.1 seconds
Relief Valve Setting	3,600.0 psi
Stroke (1)	27.0 in ( 69 cm )
Stroke (2)	21.7 in ( 55 cm )
Total	10.1 seconds
Operating Specifications
Articulation Angle	40 deg
Breakout Force	25,849.0 lbs ( 11,725 kg )
Dump Clearance at Full Lift and 45 degrees Dump Angle	9.5 ft ( 3 m )
Fuel Capacity	60.8 gal ( 230 l )
Hydraulic System Fluid Capacity	33.1 gal ( 125 l )
Operating Weight	25,699.3 lbs ( 11,657 kg )
Reach - Full Lift and 45 degrees Dump	3.0 ft ( 1 m )
Static Tipping Load - Full Turn	18,018.0 lbs ( 8,173 kg )
Static Tipping Weight	20,350.9 lbs ( 9,231 kg )
Service Refill Capacities
Cooling System	11.1 gal ( 42 l )
Crankcase	4.2 gal ( 16 l )
Front	6.9 gal ( 26 l )
Fuel Tank	59.4 gal ( 225 l )
Hydraulic Tank	18.5 gal ( 70 l )
Rear	6.6 gal ( 25 l )
Transmission	9.1 gal ( 34 l )
Steering System
Maximum Working Pressure	3,000.0 psi
Minimum Turning Radius - Over Tires	206.0 in ( 523 cm )
Steering Angle - Each Direction	40 deg
Steering Cylinder, Two, Bore	2.8 in ( 7 cm )
Tires
Size	17.5-25PR (L-2)
Tread Width	96.0 ft ( 29 m )
Transmission
2 Forward	7.8 mph ( 13 kph )
3 Forward	16.0 mph ( 26 kph )
4 Forward	23.4 mph ( 38 kph )
Forward - 1	4.9 mph ( 8 kph )
Max Speed - Forward	22.9 mph ( 37 kph )
Max Speed - Reverse	15.3 mph ( 25 kph )
Number of Forward Gears	4.0
Number of Reverse Gears	3.0
Reverse - 1	4.9 mph ( 8 kph )
Weights
Operating Weight	27,140.0 lbs ( 12,311 kg )

Dealer Contact Info:

Utah Track & Welding Inc.

Utah Track & Welding Inc. Dealer Info

Utah Track & Welding Inc. Website

Click here to email Utah Track & Welding Inc..

Contact: Sam R. Oman

Click for Phone Number

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon