Equipment ↠ Caterpillar ↠ Wheel Loaders ↠ THIS 2013 Caterpillar 930K

2013 Caterpillar 930K For Sale in South Mills, NC

Name: 2013 Caterpillar 930K
Brand: Caterpillar
Price: 89500 USD
Availability: InStock

❮

❯

For Sale: $89,500.00 USD

Apply for Financing

Southeastern Equipment Corporation

Southeastern Equipment Corporation Dealer Info

Southeastern Equipment Corporation Website

Click here to email Southeastern Equipment Corporation.

Contact: Bryan Smith

Click for Phone Number

Machine Info:

Serial Number:	RHN02000
Stock Number:	13-8767
Machine Location:	SOUTH MILLS, NC

Description:

Enclosed cab with heat and air conditioning, hydraulic quick coupler, auxiliary plumbing, general purpose bucket and forks with hydraulic fork positioning, single lever joy stick controls for hydraulic and transmission control. 20.5R25 radial tires with 70%+ tread remaining. Original factory paint with no damage. Tight center, boom, bucket and steering. Good brakes and no leaks Very clean inside and out. Well maintained loader in good repair with no issues.

From the manufacturer:

Supplied by HeavyEquipmentData.com →

Bucket
Bucket Capacities	6.5 cu yd ( 5 cu m )
Dump Clearance at Max Raise	9.3 ft ( 3 m )
Cab
FOPS	SAE J/ISO 3449 APR98 Level II, ISO 3449 1992 Level II
ROPS	SAE J1040 MAY94, ISO 3471-1994
Dimensions
Bucket Pin Height - Maximum Lift	12.8 ft ( 4 m )
Carry Height	1.5 ft ( 0 m )
Centerline of Front Axle to Hitch	4.9 ft ( 1 m )
Digging Depth	3.8 in ( 10 cm )
Dump Angle at Maximum Lift	49 deg
Dump Clearance at Maximum Lift - 45 degrees	9.3 ft ( 3 m )
Height - Center of Axle	2.2 ft ( 1 m )
Height - Top of ROPS/FOPS	10.9 ft ( 3 m )
Length - Rear Axle to Bumper	6.5 ft ( 2 m )
Overall Height - Bucket Raised	16.8 ft ( 5 m )
Overall Length	24.7 ft ( 8 m )
Rack Back Angle - Carry	45 deg
Rack Back Angle - Maximum Lift	54 deg
Reach at Maximum Lift and 45 degrees Dump	3.4 ft ( 1 m )
Wheel Base	9.8 ft ( 3 m )
Engine
Bore	4.0 in ( 10 cm )
Displacement	402.0 cu in ( 6,588 cu cm )
EEC 80/1269	156.0 hp ( 116 kw )
Engine Model	C7.1 ACERT
Gross Power	154.0 hp ( 115 kw )
Model	C6.6 ACERT
Net Power	152.0 hp ( 113 kw )
Net Torque	551.0 lbs ft ( 747 nm )
Number of Cylinders	6.0
Rated Net Power	154.0 hp ( 115 kw )
Stroke	5.0 in ( 13 cm )
Hydraulic System
Dump Time	1.7 seconds
Lower Time	2.7 seconds
Pump Flow Capacity	50.0 gpm ( 189 lpm )
Raise Time	5.7 seconds
Relief Valve Setting	3,626.0 psi
Loader Hydraulic System
Bore (1)	4.7 in ( 12 cm )
Bore (2)	5.9 in ( 15 cm )
Dump	1.5 seconds
Hydraulic Cycle Time	9.3 seconds
Lower, Empty, Float Down	2.7 seconds
Pump Flow - Implement Pump	50.0 gpm ( 189 lpm )
Raise	5.1 seconds
Stroke (1)	28.7 in ( 73 cm )
Stroke (2)	21.9 in ( 56 cm )
Total	9.3 seconds
Operating Specifications
Articulation Angle	40 deg
Cooling System Fluid Capacity	8.5 gal ( 32 l )
Dump Clearance at Full Lift and 45 degrees Dump Angle	9.3 ft ( 3 m )
Front Axle/Diff Fluid Capacity	6.9 gal ( 26 l )
Fuel Capacity	51.5 gal ( 195 l )
Hydraulic System Fluid Capacity	43.6 gal ( 165 l )
Operating Weight	28,948.0 lbs ( 13,131 kg )
Rated Bucket Capacity	3 - 7 cu yd ( 2 cu m )
Reach - Full Lift and 45 degrees Dump	3.4 ft ( 1 m )
Rear Axle/Diff Fluid Capacity	6.9 gal ( 26 l )
Static Tipping Load - Full Turn	18,444.0 lbs ( 8,366 kg )
Tire Size	20.5
Transmission Fluid Capacity	2.2 gal ( 8 l )
Service Refill Capacities
Cooling System	7.9 gal ( 30 l )
Crankcase	5.3 gal ( 20 l )
Front	6.9 gal ( 26 l )
Fuel Tank	51.5 gal ( 195 l )
Hydraulic Tank	23.8 gal ( 90 l )
Rear	6.6 gal ( 25 l )
Transmission	2.2 gal ( 8 l )
Steering System
Maximum Working Pressure	3,500.0 psi
Steering Angle - Each Direction	40 deg
Steering Articulation	40 deg
Steering Cylinder, Two, Bore	2.8 in ( 7 cm )
Tires
Size	20.5 R25, radial (L-3)
Transmission
2 Forward	8.0 mph ( 13 kph )
3 Forward	17.0 mph ( 27 kph )
4 Forward	25.0 mph ( 40 kph )
Forward - 1	8.0 mph ( 13 kph )
Max Speed - Forward	25.0 mph ( 40 kph )
Max Speed - Reverse	25.0 mph ( 40 kph )
Number of Forward Gears	4.0
Number of Reverse Gears	4.0
Reverse - 1	8.0 mph ( 13 kph )
Weights
Operating Weight	30,479.0 lbs ( 13,825 kg )
Operational Weight	30,479.0 lbs ( 13,825 kg )

Dealer Contact Info:

Southeastern Equipment Corporation

Southeastern Equipment Corporation Dealer Info

Southeastern Equipment Corporation Website

Click here to email Southeastern Equipment Corporation.

Contact: Bryan Smith

Click for Phone Number

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon