Equipment ↠ Caterpillar ↠ Wheel Loaders ↠ THIS 2015 Caterpillar 938K

2015 Caterpillar 938K

Name: 2015 Caterpillar 938K
Brand: Caterpillar
Price: 76500 USD
Availability: OutOfStock

❮

❯

MACHINE SOLD

Southeastern Equipment Corporation

Southeastern Equipment Corporation Dealer Info

Southeastern Equipment Corporation Website

Click here to email Southeastern Equipment Corporation.

Contact: Bryan Smith

Click for Phone Number

Machine Info:

Serial Number:	SWL03949
Stock Number:	13-8075
Machine Location:	CHESAPEAKE, VA

Description:

Enclosed cab with heat and cold air conditioning. Equipped with Rockland, lumber forks with hydraulic top clamp. Starts easily and burs clean exhaust . the transmission shifts smoothly through all gear ranges in forward and reverse directions. Good brakes, tight steering. Tight articulation joint, loader frame and forks. No leaks. Original factory paint with no damage. Inside the cab is clean with all controls functioning properly. Well maintained machine with no known issues.

From the manufacturer:

Supplied by HeavyEquipmentData.com →

Bucket
Bucket Capacities	6.5 cu yd ( 5 cu m )
Dump Clearance at Max Raise	9.3 ft ( 3 m )
Cab
FOPS	SAE J/ISO 3449 APR98 Level II, ISO 3449 1992 Level II
ROPS	SAE J1040 MAY94, ISO 3471-1994
Dimensions
Bucket Pin Height - Maximum Lift	13.0 ft ( 4 m )
Carry Height	1.5 ft ( 0 m )
Centerline of Front Axle to Hitch	5.0 ft ( 2 m )
Digging Depth	3.9 in ( 10 cm )
Dump Angle at Maximum Lift	49 deg
Dump Clearance at Maximum Lift - 45 degrees	9.3 ft ( 3 m )
Height - Center of Axle	2.2 ft ( 1 m )
Height - Top of ROPS/FOPS	10.9 ft ( 3 m )
Length - Rear Axle to Bumper	6.4 ft ( 2 m )
Overall Height - Bucket Raised	17.3 ft ( 5 m )
Overall Length	25.1 ft ( 8 m )
Rack Back Angle - Carry	45 deg
Rack Back Angle - Maximum Lift	54 deg
Reach at Maximum Lift and 45 degrees Dump	3.8 ft ( 1 m )
Wheel Base	10.0 ft ( 3 m )
Wheel Base Length	10.0 ft ( 3 m )
Engine
Bore	4.0 in ( 10 cm )
Displacement	402.0 cu in ( 6,588 cu cm )
EEC 80/1269	170.0 hp ( 127 kw )
Engine Model	C7.1 ACERT
Gross Power	175.0 hp ( 131 kw )
Model	C6.6 ACERT
Net Power	169.0 hp ( 126 kw )
Net Torque	591.0 lbs ft ( 801 nm )
Number of Cylinders	6.0
Rated Net Power	169.0 hp ( 126 kw )
Stroke	5.0 in ( 13 cm )
Torque Measured @	1,600.0 rpm
Hydraulic System
Dump Time	1.5 seconds
Lower Time	2.7 seconds
Pump Flow Capacity	50.0 gpm ( 189 lpm )
Raise Time	6.2 seconds
Relief Valve Setting	4,061.0 psi
Loader Hydraulic System
Bore (1)	4.7 in ( 12 cm )
Bore (2)	5.9 in ( 15 cm )
Dump	1.5 seconds
Hydraulic Cycle Time	9.7 seconds
Lower, Empty, Float Down	2.7 seconds
Pump Flow - Implement Pump	50.0 gpm ( 189 lpm )
Raise	5.5 seconds
Stroke (1)	31.1 in ( 79 cm )
Stroke (2)	21.9 in ( 56 cm )
Total	9.7 seconds
Operating Specifications
Articulation Angle	40 deg
Cooling System Fluid Capacity	8.5 gal ( 32 l )
Dump Clearance at Full Lift and 45 degrees Dump Angle	9.3 ft ( 3 m )
Front Axle/Diff Fluid Capacity	9.2 gal ( 35 l )
Fuel Capacity	51.5 gal ( 195 l )
Hydraulic System Fluid Capacity	23.8 gal ( 90 l )
Operating Weight	34,129.0 lbs ( 15,481 kg )
Rated Bucket Capacity	3 - 7 cu yd ( 3 cu m )
Reach - Full Lift and 45 degrees Dump	3.8 ft ( 1 m )
Rear Axle/Diff Fluid Capacity	9.2 gal ( 35 l )
Static Tipping Load - Full Turn	20,997.0 lbs ( 9,524 kg )
Tire Size	20.5
Transmission Fluid Capacity	2.9 gal ( 11 l )
Service Refill Capacities
Cooling System	7.9 gal ( 30 l )
Crankcase	5.3 gal ( 20 l )
Front	9.2 gal ( 35 l )
Fuel Tank	51.5 gal ( 195 l )
Hydraulic Tank	23.8 gal ( 90 l )
Rear	9.2 gal ( 35 l )
Transmission	2.9 gal ( 11 l )
Steering System
Maximum Working Pressure	3,500.0 psi
Steering Angle - Each Direction	40 deg
Steering Articulation	40 deg
Steering Cylinder, Two, Bore	3.1 in ( 8 cm )
Tires
Size	20.5 R25, radial (L-3)
Transmission
2 Forward	8.0 mph ( 13 kph )
3 Forward	17.0 mph ( 27 kph )
4 Forward	25.0 mph ( 40 kph )
Forward - 1	8.0 mph ( 13 kph )
Max Speed - Forward	25.0 mph ( 40 kph )
Max Speed - Reverse	25.0 mph ( 40 kph )
Number of Forward Gears	4.0
Number of Reverse Gears	4.0
Reverse - 1	8.0 mph ( 13 kph )
Weights
Operating Weight	35,104.0 lbs ( 15,923 kg )
Operational Weight	35,104.0 lbs ( 15,923 kg )

Dealer Contact Info:

Southeastern Equipment Corporation

Southeastern Equipment Corporation Dealer Info

Southeastern Equipment Corporation Website

Click here to email Southeastern Equipment Corporation.

Contact: Bryan Smith

Click for Phone Number

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon