Create a CEG Account  /  CEG Login

2012 Caterpillar 938K RQ+ For Sale in Novi, MI


/ Save to Watch List

For Sale: $56,900.00 USD

Apply for Financing

Machine Info:

Hours:15157
Serial Number:SWL00655
Machine Location:NOVI, MI
More Information:https://catused.com/cu/10272102

Description:

CAB, AC, HQC, BKT, RC, 20.5R25, CONDITION, HOURS AND ATTACHMENTS SUBJECT TO CHANGE, Online Owner's Manual , PLEASE CALL FOR MACHINE LOCATION

Machine Details:

GENERAL CONDITION
Machine Starts and is OperableYes
S.O.S. (All Compartments)No
Tires are Aired Up and DrivableYes
GENERAL APPEARANCE
Cab or CanopyFair
CounterweightGood
Crankcase Guard / Battery BoxFair
DecalsFair
Eng. Enclose Hood / StackFair
FendersFair
Fuel TankGood
Grab IronsGood
PaintFair
Pre-Cleaner BowlFair
Radiator Grill & ShroudFair
Sheet MetalFair
Steps / LadderFair
SAFETY ITEMS
ROPS Certification PlateYes
Safety Decals In PlaceYes
Safety Decals LegibleYes
OPERATOR STATION
Current O&MMYes
Current Parts ManualNo
Current Safety ManualNo
ENGINE
Apparent Other Engine DamageNo
Blow ByYes
Fuel LeaksNo
KnockingNo
Oil LeaksYes
Water in OilNo
COOLING SYSTEM
Compression in RadiatorNo
Oil in Anti-FreezeNo
ELECTRICAL, STARTING AND CHARGING SYSTEM
Block HeaterYes
Ether AidYes
TRANSMISSION
Mag Screens CheckedNo
Transmission - NoisyNo
STEERING
Articulate P & BGood
Hand Metering UnitFair
Lines / Fittings - STEERINGGood
Steering CylinderFair
Steering LinkageGood
Steering Wheel Tilt / ExtendGood
BRAKE
Holds In ParkYes
Leaks - BRAKENo
HYDRAULICS
Leaks - HYDRAULICSNo
BUCKET
High LiftNo
Standard LiftYes
FINAL DRIVES
Leaks - FINAL DRIVESNo
TIRES
SpareNo


From the manufacturer:

Supplied by HeavyEquipmentData.com →


The Caterpillar 938K is a wheel loader designed for material handling, stockpiling, truck loading, and general construction applications. It is part of Caterpillar's K Series and is commonly used in aggregate yards, waste handling, agriculture, and industrial sites. The 938K features a hydrostatic drive system, articulated steering, and a front-end loader configuration for efficient loading and maneuvering in confined areas. Typical attachments include general-purpose buckets, forks, and specialty tools. The model is known for operator visibility, service access, and compatibility with a range of worksite tasks. It is classified as a medium wheel loader in Caterpillar's equipment lineup.
Bucket
Bucket Capacities 7 cu yd (5 cu m)
Dump Clearance at Max Raise 9 ft (3 m)
Cab
FOPS SAE J/ISO 3449 APR98 Level II ISO 3449 1992 Level II
ROPS SAE J1040 MAY94 ISO 3471-1994
Dimensions
Bucket Pin Height - Maximum Lift 13 ft (4 m)
Carry Height 2 ft (0 m)
Centerline of Front Axle to Hitch 5 ft (2 m)
Digging Depth 4 in (10 cm)
Dump Angle at Maximum Lift 49 degrees
Dump Clearance at Maximum Lift - 45 degrees 9 ft (3 m)
Height - Center of Axle 2 ft (1 m)
Height - Top of ROPS/FOPS 11 ft (3 m)
Length - Rear Axle to Bumper 6 ft (2 m)
Overall Height - Bucket Raised 17 ft (5 m)
Overall Length 25 ft (8 m)
Rack Back Angle - Carry 45 degrees
Rack Back Angle - Maximum Lift 54 degrees
Reach at Maximum Lift and 45 degrees Dump 4 ft (1 m)
Wheel Base 10 ft (3 m)
Wheel Base Length 10 ft (3 m)
Engine
Bore 4 in (10 cm)
Displacement 402 cu in (6,588 cu cm)
EEC 80/1269 170 hp (127 kw)
Engine Model C7.1 ACERT
Gross Power 175 hp (131 kw)
Net Power 169 hp (126 kw)
Net Torque 591 lbs ft (801 nm)
Number of Cylinders 6
Rated Net Power 169 hp (126 kw)
Stroke 5 in (13 cm)
Torque Measured @ 1,600 rpm
Hydraulic System
Dump Time 2 seconds
Lower Time 3 seconds
Pump Flow Capacity 50 gpm (189 lpm)
Raise Time 6 seconds
Relief Valve Setting 4,061 psi
Loader Hydraulic System
Bore (1) 5 in (12 cm)
Bore (2) 6 in (15 cm)
Dump 2 seconds
Hydraulic Cycle Time 10 seconds
Lower, Empty, Float Down 3 seconds
Pump Flow - Implement Pump 50 gpm (189 lpm)
Raise 6 seconds
Stroke (1) 31 in (79 cm)
Stroke (2) 22 in (56 cm)
Total 10 seconds
Operating Specifications
Articulation Angle 40 degrees
Cooling System Fluid Capacity 9 gal (32 l)
Dump Clearance at Full Lift and 45 degrees Dump Angle 9 ft (3 m)
Front Axle/Diff Fluid Capacity 9 gal (35 l)
Fuel Capacity 52 gal (195 l)
Hydraulic System Fluid Capacity 24 gal (90 l)
Operating Weight 34,129 lbs (15,481 kg)
Rated Bucket Capacity 3 - 7 cu yd (3 - 5 cu m)
Reach - Full Lift and 45 degrees Dump 4 ft (1 m)
Rear Axle/Diff Fluid Capacity 9 gal (35 l)
Static Tipping Load - Full Turn 20,997 lbs (9,524 kg)
Tire Size 21
Transmission Fluid Capacity 3 gal (11 l)
Service Refill Capacities
Cooling System 8 gal (30 l)
Crankcase 5 gal (20 l)
Front 9 gal (35 l)
Fuel Tank 52 gal (195 l)
Hydraulic Tank 24 gal (90 l)
Rear 9 gal (35 l)
Transmission 3 gal (11 l)
Steering System
Maximum Working Pressure 3,500 psi
Steering Angle - Each Direction 40 degrees
Steering Articulation 40 degrees
Steering Cylinder, Two, Bore 3 in (8 cm)
Tires
Size 20.5 R25 radial (L-3)
Transmission
2 Forward 8 mph (13 kph)
3 Forward 17 mph (27 kph)
4 Forward 25 mph (40 kph)
Forward - 1 8 mph (13 kph)
Max Speed - Forward 25 mph (40 kph)
Max Speed - Reverse 25 mph (40 kph)
Number of Forward Gears 4
Number of Reverse Gears 4
Reverse - 1 8 mph (13 kph)
Weights
Operating Weight 35,104 lbs (15,923 kg)
Operational Weight 35,104 lbs (15,923 kg)

Dealer Contact Info:

MacAllister Machinery – North



Contact: Nikki Paschall

Click for Phone Number


Request an equipment inspection
Get shipping quotes




Log In to Your CEG Account







×

Stay Ahead of the Market

Get weekly equipment news, auction updates, and dealer insights — trusted by thousands of industry professionals.



39.96118 \\ -82.99879 \\ Columbus \\ OH \\ US \\ 43215