Create a CEG Account  /  CEG Login

2003 John Deere 250D For Sale in South Mills, NC


/ Save to Watch List

For Sale: $59,500.00 USD

Apply for Financing

Machine Info:

Serial Number:CEG-BE250DT200707
Stock Number:11-9246
Machine Location:SOUTH MILLS, NC

Description:

Enclosed cab with heat and air conditioning. Pre-emission diesel engine. Mismatched 80% 23.5-25 tires all around, good brakes, tight steering and center joint. No visible leaks. Starts easily and burns clean exhaust. The transmission shifts smoothly and pulls strong. Well maintained truck in good repair with no known issues.

Machine Details:

General Specifications
capacity25
capacityUnitton
drive6WD
hours13428
bedlinerNo
airconditioningYes
heaterYes
acconditionGood
reartiretypeSingles
fronttirepercentremaining80
reartirepercentremaining80
scaleNo
axletypeTandem
ropstypeEnclosed
articulatingYes
fuellubebodyNo
heatedbedNo
ejectorbedNo


From the manufacturer:

Supplied by HeavyEquipmentData.com →


The John Deere 250D is an off-highway articulated dump truck designed for hauling material in construction, quarry, and earthmoving applications. It is part of John Deere's D-Series truck line and is built for operation on rough terrain, with a heavy-duty frame, articulated steering, and a rear dump body for efficient load transport. The 250D is commonly used for moving soil, aggregate, rock, and demolition debris across job sites. Typical features include diesel power, all-wheel drive, and operator-focused controls. The model is recognized for its off-road mobility, load-carrying capacity, and suitability for demanding material handling tasks.
Articulating/Rigid
Articulating/Rigid Articulated
Dimensions
Dump Ground Clearance 2 ft (1 m)
Dump Height 20 ft (6 m)
Ground Clearance 2 ft (0 m)
Overall Height 12 ft (4 m)
Overall Length 31 ft (10 m)
Overall Width 9 ft (3 m)
Wheelbase 17 ft (5 m)
DRIVE SYSTEM
Drive Config 6x6
Dump
Capacity - Heaped 18 cu yd (14 cu m)
Capacity - Struck 14 cu yd (10 cu m)
Dump Angle 70 degrees
Lower Time 6 seconds
Raise Time 12 seconds
Rated Payload 51,150 lbs (23,201 kg)
Engine
Aspiration Turbocharger charge air cooled
Displacement 549 cu in (8,997 cu cm)
Engine Model 6,090
Make Deere
Max Torque 789 lbs ft (1,070 nm)
Net Power 265 hp (198 kw)
Number of Cylinders 6
Power Measured @ 2,000 rpm
Torque Measured @ 1,400 rpm
Operating Specifications
Alternator Supplied Amperage 80 amps
Cooling System Fluid Capacity 9 gal (33 l)
Engine Oil Capacity 7 gal (25 l)
Fuel Capacity 90 gal (341 l)
Hydraulic System Fluid Capacity 21 gal (79 l)
Operating Voltage 24 volts
Tire Size 23.5R25
Transmission Fluid Capacity 6 gal (22 l)
Transmission
Max Speed 31 mph (50 kph)
Number of Forward Gears 6
Number of Reverse Gears 1
Transmission Type ZF 6HP592C fully automatic
Weights
Center Axle - empty 8,995 lbs (4,080 kg)
Center Axle - loaded 31,394 lbs (14,240 kg)
Front Axle - empty 22,355 lbs (10,140 kg)
Front Axle - loaded 29,013 lbs (13,160 kg)
Operating Weight 91,490 lbs (41,499 kg)
Rear Axle - empty 8,973 lbs (4,070 kg)
Rear Axle - loaded 31,085 lbs (14,100 kg)
Total Empty 40,345 lbs (18,300 kg)
Total Loaded 91,492 lbs (41,500 kg)

Dealer Contact Info:

Southeastern Equipment Corporation (North Carolina)



Contact: Bryan Smith

Click for Phone Number


Request an equipment inspection
Get shipping quotes




Log In to Your CEG Account







×

Stay Ahead of the Market

Get weekly equipment news, auction updates, and dealer insights — trusted by thousands of industry professionals.



39.96118 \\ -82.99879 \\ Columbus \\ OH \\ US \\ 43215