Virnig Manufacturing Announces Pin-On Wing Option for Snow Blades

This option features two 12 in. (30.5 cm) wide wings angled 20 degrees forward from moldboard to increase a snow blade’s width by 21-3/4 in. (55 cm).

📅   Tue August 18, 2015 - National Edition
CEG


Pin-on wing option features two 12 in. (30.5 cm) wide wings angled 20 degrees forward from moldboard to increase a snow blade’s width by 21 3/4 in. (55 cm).
Pin-on wing option features two 12 in. (30.5 cm) wide wings angled 20 degrees forward from moldboard to increase a snow blade’s width by 21 3/4 in. (55 cm).

Virnig Manufacturing Inc. announced a new pin-on wing option.

This option features two 12 in. (30.5 cm) wide wings angled 20 degrees forward from moldboard to increase a snow blade’s width by 21-3/4 in. (55 cm). Where extra width is not needed, simply remove the wings by taking out the two pins that hold each wing in place.

A 1 in. (2.5 cm) thick urethane edge has slots for height adjustment as the blade’s main edge wears. Slots allow enough adjustment for flipping?of the main blade’s wear edge.

The pin-on wings are compatible with new Virnig V-Snow blades and angle snow blades with factory mounted holes. Two brackets bolt to each side of snow blade moldboard and two pins mount each wing to the bracket.

Retro pin-on wings also are available for older models. These wings are installed by drilling holes and bolting brackets to each side of the moldboard. Two pins mount each wing to the brackets. Alternatively, the brackets can be welded to the moldboard.

Virnig does not recommend installing these wings on non-Virnig snow blades.

All Virnig products are backed by a one-year warranty, and the skid steer attachments are built with a universal mount to fit most skid steer loaders including: Bobcat, Caterpillar, ASV, Case, Daewoo, Gehl, JCB, John Deere, Kubota, Mustang, New Holland, Takeuchi, Terex, Volvo, Wacker-Neuson and others.

For more information, call 800/648-2408 or visit virnigmfg.com/products/snow/.