List Your Equipment For Free  /  Seller Login

Hamm | Ballast Compaction in Railroad Construction Using HD 10C VV Compact Roller

Mon October 09, 2023 - National Edition #24
Wirtgen Group


For railroad construction works to upgrade the switches in Aarau, Switzerland, the Hamm HD 10C VV tandem roller was deployed to complete the ballast works.
For railroad construction works to upgrade the switches in Aarau, Switzerland, the Hamm HD 10C VV tandem roller was deployed to complete the ballast works.
For railroad construction works to upgrade the switches in Aarau, Switzerland, the Hamm HD 10C VV tandem roller was deployed to complete the ballast works. Following the mechanical surfacing stage of the switch construction, the HD 10 C VV compacted the ballast to homogenize it further. Once the ballast had been excavated, cleaned and put back down by the W+ system, the switches were upgraded. Foreman Jürgen Franzen (K) and operator René Neujahr from the Rhomberg Sersa Rail Group discuss the individual work steps.

HD CompactLine compact rollers can be used virtually anywhere in the fields of asphalt construction, earthworks and landscaping. What many people don't realize is that they are also necessary in railroad construction.

In Aarau in Switzerland, the Hamm HD 10C VV tandem roller was used in works to upgrade the switches. In these works, compacting the ballast is an integral part of the pre-compaction process. If a ballast bed is not cleanly compacted and homogenized, this can lead to costly processes further down the line.

Compact tandem rollers can achieve optimum compacting results on ballast layers, frost protection layers and base courses, as well as water-bound road surfaces and asphalt layers. The articulated compact rollers of the HD CompactLine are ideally suited to railroad construction — including the HD 10C VV tandem roller used for the project in Aarau.

Following the mechanical surfacing stage of the switch construction, the HD 10 C VV compacted the ballast to homogenize it further.

Quality of Ballast Bed Is Critical

The condition of the ballast bed upon which the rails are laid is one of the determining factors for the quality of the guideway. The ballast has a whole host of important jobs to fulfill, which require it to have very specific properties. The basic prerequisites: The ballast follows a clearly defined distribution of stone sizes and fulfills various geometric, physical and chemical requirements.

Ideally Suited for Railroad Construction

"The weight of a roller is a major consideration in railroad construction," explained Jürgen Franzen, foreman of the Rhomberg Sersa Rail Group who are completing the construction works.

"Even from around three metric tons upward, you can see clear differences in the tracks the roller leaves behind. However, the actual problem is hard to see with the naked eye — namely, the graining. This means there are certain fracture points in the ballast. However, the ballast stones need to have certain properties to stick together as required. Too much weight would impair this characteristic. Plus, the compact proportions of the HD 10C VV also make it particularly easy to load onto transport vehicles, so it's a great option for transporting around."

Once the ballast had been excavated, cleaned and put back down by the W+ system, the switches were upgraded.

Major Time Savings During Operating Hours

The work to upgrade the switches generally take place during normal operation of trains on the adjacent track. In Aarau, the reconstruction work was carried out on a three-shift rotation. Each work step intertwines with the next and they build on each other. This is important because the rail traffic generally resumes operations immediately after the switches are installed, since closures are kept to an absolute minimum.

Carefully Coordinated Processes for More Efficiency, Safety

The switches were upgraded once the W+ excavation system had excavated, cleaned and reapplied the ballast. While the W+ was doing its thing, the HD 10C VV was compacting the ballast.

The tandem roller with vibrating roller drums provides not only the initial compaction, but also a level surface on which to subsequently lay the sleepers flat. This initial compaction essentially gives a degree of compactness to the deposited material. The ballast here already has a certain sticking quality.

The HD 10C VV compensates for this with compression and vibration. This way, the material fuses together better. Then the mechanical surfacing stage of the switch construction began. After that, it was mechanically tamped to further homogenize the ballast.

"The HD 10C VV has everything I could possibly need to do my job properly. It's intuitive to operate. It has really impressive visibility and excellent driving and handling characteristics," said René Neujahr, operator of the Rhomberg Sersa Rail Group.

Jürgen Franzen, foreman of the company completing the construction works, added: "If there's a raised section in the center beneath a sleeper, caused by an oversight in the compacting stage, that sleeper could crack. That is relatively easily remedied if it is a track sleeper. But the way the switch is here in Aarau means we can't implicate any other switches. So everything would grind to a halt. You can tamp it, but you would still need to remove the sleeper afterwards and properly refurbish it. Our Hamm roller helps ensure this doesn't happen."

Foreman Jürgen Franzen (K) and operator René Neujahr from the Rhomberg Sersa Rail Group discuss the individual work steps.

For more information, visit www.wirtgen-group.com.




Today's top stories

Rebuilding Process Begins Post-Helene

KCI, MoDOT Work to Improve I-55 Near St. Louis

ODOT's I-75 Rehabilitation Currently On Time, Budget

Associated Equipment Distributor's Former Chairman Craig Drury Urges Senate to Reconsider Broad Approach to Right to Repair

Mecalac Launches Range of Hammers, Revolutionizing Efficiency On Working Sites

New Holland Construction Unveils E90D Midi Excavator

JCB Launches Biggest X Series Crawler Excavator With 370X

Alabama AGC Honors 2024 Winners of 40 Under 40 in Construction Awards


 







39.04690 \\ -77.49030 \\ Ashburn \\ PA