List and Sell Your Equipment  /  Dealer Login  /  Create Account

HD+ Series Tandem Asphalt Rollers Join Hamm Lineup

Mon March 23, 2009 - National Edition
Construction Equipment Guide

The new HD+ Series of tandem asphalt rollers from Hamm Compaction Division of Wirtgen America Inc. was introduced to North America at the World of Asphalt 2009 Show & Conference in Orlando in March.

The HD+ 120 and HD+ 140 rollers — the first of the HD+ line — are articulated tandem rollers, with respective operating weights of 13.2 and 15.4 tons (12 and 14 t), and respective drum widths of 78 and 84 in. (198 and 213 cm). They feature a large operator’s platform, enhanced visibility conditions for the operator, and impressive performance data, according to the manufacturer.

The HD+ 120 and HD+ 140 rollers replace the existing HD 120 and HD 130 rollers in the Hamm lineup.

Each size compactor will be available in three models: the HD+ 120 or 140 VV, with conventional vibration in both drums; the HD+ 120 or 140 VO, with vibration in the front and Oscillation compaction in the rear; and the HD+ 120 or 140 VV HF, offering high-frequency vibration to 4,020 vpm. Frequency and amplitude can now be controlled independently on either drum, providing increased flexibility in the roll train.

“This machine has been developed over the last four years specifically to meet the criteria of the North American contractor,” said Richard Evans, vice president-sales, Hamm Compaction Division of Wirtgen America Inc. “They are available as conventional vibratory machines and, of course, exclusive Hamm Oscillation compaction is available on either model. A third option is a high frequency HD+ machine that features 4,020 vpm.”

Unlike some machines, which require physical movement of weights on the side of each drum to change amplitude, which is hard enough to do in the daylight, let alone at night when most of the major highway work is done, amplitude and frequency adjustment on the HD+ models can be done by the operator on the dashboard.

New on the HD+ models is the ability to pivot both the seat and the console across the full width of the big HD+ platform, for much better control and visibility, particularly to the drum edges. Operator comfort is enhanced with cup holders and lunch box tray.

“In addition, if you are a big guy, the steering column tilts up out of the way when you are climbing in or out of the seat,” Evans said. “Also, the drive levers are wide, so you have plenty of room for your legs.”

The HD+ Series’ offset capability is close to 7 in. (17.8 cm)

“We can roll around a curb with the front drum without risking damage by the rear drum and now, with the extra 3-in. offset over the older model, we now have enough offset for a good roller operator to pinch a joint,” Evans said.

That means an operator can keep the front drum on the hot material and offset the rear drum so it can bridge between the pre-compacted hot material and the cold joint, potentially saving a pass for higher productivity, and avoiding travel in the other lane of traffic, for enhanced safety.

New drum edge lights are now standard on the Hamm HD+ Series. Halogen lights mounted on the ROPS are available either in a four-light or six-light configuration. A xenon light option on the ROPS for those markets with this requirement also is available for use where it’s specified.

For more information, call 615/501-0600 or visit

Today's top stories

Proposed Rollback of NEPA Reforms Conflicts With Biden's Infrastructure Goals

Contractors Solve Logistical Challenges On Coastal Project

NCDOT Calls On Lane Construction to Improve I-440 With $365M Project

Integration of Topcon 3D-MC With Volvo Active Control Raises Bar in Excavation Precision

VIDEO: Junttan Unveils World's First Electric Pile Driving Rig

Ga. Bridge Collapse Leaves One Construction Worker Dead, Two Injured

Case to Host Live Virtual Event on Machine Control for Dozers, Motor Graders

VIDEO: Woods CRW Holds Two-Day Open House in Carlisle, Pa.


ceg-logo ceg-logo ceg-logo ceg-logo ceg-logo