Wed August 05, 2009
Topcon 3.4 G3 Firmware Provides
Topcon Positioning Systems (TPS) recently announced the release of its Version 3.4 G3 receiver firmware that upgrades the performance and usability of all Topcon GNSS receiver platforms including the GR-3 and GRS-1 systems....
Mon July 27, 2009
Topcon Tierra Awarded 2009 M2M Value Chain Award
Topcon Tierra, a world leader in remote asset management telematics solutions, has been awarded the coveted 2009 M2M (Machine to Machine) Value Chain Award in the Construction category. “Topcon Tierra uses advanced GPS technology and a simple back-office, web-based communications system to reduce cost and increase productivity…....
Wed July 01, 2009
Topcon Tierra Provides Solutions for Job Site Security
Topcon Tierra is a Web-based telematics service from Topcon Positioning Systems (TPS) that makes data onboard any piece of rolling stock available from a remote location. Conversely, information operators need to see will be directly available on the vehicle on the job site regardless of location — local, regional, national, or globally....
Fri June 12, 2009
Topcon Receivers Track New L5 Signal
Topcon Positioning Systems (TPS) engineers have successfully tracked the new L5 signal transmitted from a U.S.-based GPS satellite. More than four years ago, Topcon announced it had receivers capable of tracking L5 signals....
Mary Reed - Fri June 12, 2009
Topcon Draws More Than 170 Attendees to Sacaton
John Deere’s new 764 High-Speed Dozer (HSD) fitted with Topcon Positioning System’s 3D-MC2 machine control was introduced to more than 170 attendees at Deere’s March 2009 Fleet Smart gathering in Sacaton, Ariz....
Tue June 02, 2009
TPS’s 3D-MC2 Enhances Dozer Productivity
Murray Lodge, vice president of construction for Topcon Positioning Systems (TPS), is very pleased with the job site results of Topcon’s 3D-MC2, a one-of-a-kind dozer machine control technology. Some of the top construction companies are using Topcon Positioning Systems’ 3D-MC2 system and reporting productivity gains more than twice that of regular 3D machine control systems, according to the manufacturer....
Wed April 08, 2009
Topcon Unveils GRS-1 Hand-Held GNSS System
Topcon Positioning System’s (TPS) new GRS-1 is a fully integrated dual-constellation, network-enabled RTK rover system. It is an all-in-one handheld GNSS receiver and field controller with high-speed processor, increased memory, built-in camera, compass and bar code reading function....
Fri March 27, 2009
Topcon Announces GRS-1 Hand-Held GNSS Integrated Rover System
Topcon Positioning System’s (TPS) new GRS-1 is a fully integrated dual-constellation, network-enabled RTK rover system. It is an all-in-one handheld GNSS receiver and field controller with high-speed processor, increased memory, built-in camera, compass and bar code reading function....
Tue January 20, 2009
Topcon RL-VH4 Builder Lasers Offers GreenBeam Visibility
Topcon Positioning Systems’ (TPS) RL-VH4 Builder Laser Series for use in interior and general construction incorporates GreenBeam technology that was introduced by Topcon in 1997. The series also comes with a red beam option....
Wed February 18, 2009
Topcon Positioning Systems, AeroTech Sales Sign OEM Agreement in California
Topcon Positioning Systems (TPS) has signed an agreement with AeroTech Sales LLC., of Fountain Valley, Calif., to represent the OEM market for TPS’s mobile control products. AeroTech has extensive experience in servicing large defense, transportation, space and related industries throughout Southern California....
