The PC290LCi-11 is perfect for applications where the customer is looking for good stability and working range, while avoiding the transportation limits of larger-size-class excavators, according to Komatsu.

Komatsu America Corp.'s PC290LCi-11 features intelligent machine control (iMC), which is based on Komatsu's unique sensor package, including stroke sensing hydraulic cylinders, an IMU sensor and GNSS antennas. This technology utilizes 3D design data loaded in the control box to accurately check its position against the target to semi-automatically limit over-excavation.

"The PC290LCi-11 is perfect for applications where the customer is looking for good stability and working range, while avoiding the transportation limits of larger-size-class excavators," said Andrew Earing, senior product manager, tracked equipment, Komatsu.

Features that make the PC290LCi-11 a unique hydraulic excavator include:

• Intelligent machine control joysticks: semi-auto/manual-mode switching and design surface offset function can be operated with switches on the control levers.
• Auto grade assist — as the operator moves the arm, the boom adjusts the bucket height automatically, tracing the target surface and minimizing digging too deep.
• Auto stop control — during boom and bucket operation, the work equipment automatically stops when the bucket edge reaches the design surface, thus minimizing design surface damage.
• Minimum distance control — the machine controls the bucket by automatically selecting the point on the bucket closest to the target surface. If the machine is not facing a sloped surface at a right angle, it will still follow the target surface and minimize digging below it.
• Facing angle compass — the orientation of the facing angle compass' arrow shows the operator the facing angle, relative to target surface. This allows the bucket edge to be accurately positioned square with the target surface.
• Realistic 3D display — the machine and design surfaces are shown in realistic 3D. The angle and magnification of the views can be changed, allowing the operator to select the optimum view, depending on work conditions.
• Control box — the intelligent machine control monitor uses a large 12.1 screen for visibility and ease of use. The simple screen layout displays the necessary information in an easily understood fashion. A touch screen icon interface, instead of a multi-step menu, simplifies operation.

Other performance features include:

• A 6.69 L, 196 hp, EPA Tier IV Final, SAA6D107E-3 engine
• KOMTRAX level 5 technology feeds the operator machine data, such as fuel and diesel exhaust fluid (DEF) levels, Komatsu diesel particulate filter (DPF), regeneration status, location, cautions and maintenance alert information.

The PC290LCi-11 excavator, whether rented, leased or purchased, is covered by the Komatsu CARE complimentary maintenance program for the first three years or 2,000 hours, whichever comes first. Komatsu CARE includes scheduled factory maintenance, a 50-point inspection at each service and up to two complimentary Komatsu DPF exchanges and up to two DEF tank flushes in the first five years.

For more information, visit www.komatsuamerica.com .

Today's top stories

North Causeway Bridge Offers Innovation, Congestion Relief for Fort Pierce, Fla., Motorists

Missouri's $284M Chester Bridge Under Construction

Mecalac Offers Telescopic Wheel Loader to Improve Stability, Mobility in Material Handling Applications

Chicago Bears Announce Plans for New Enclosed Stadium

Oshkosh Corporation to Acquire AUSA

Webuild Ready to Rebuild Collapsed Baltimore Bridge

Crews Complete Covington, Georgia Community Project

Alabama AGC Announces BUILDSouth Award Winners