Minnich Introduces M-Box Vibration Control Solution

Mon January 29, 2018 - National Edition
Construction Equipment Guide


Minnich M-Box operators can select from speeds of 6,000, 8,000, and 10,800 VPM. The product converts the 230-volt, single-phase outlet of a 3,500-watt generator to 230-volt, three-phase output, allowing the operator to choose a uniform and compatible constant speed under different concrete loads.
Minnich M-Box operators can select from speeds of 6,000, 8,000, and 10,800 VPM. The product converts the 230-volt, single-phase outlet of a 3,500-watt generator to 230-volt, three-phase output, allowing the operator to choose a uniform and compatible constant speed under different concrete loads.

Minnich Manufacturing, a manufacturer of concrete dowel pin drills, concrete vibrators and vibrator monitoring systems, has introduced the M-Box vibration control solution.

The Minnich M-Box is an innovative control speed high-cycle power converter that enables high-cycle vibrator operators to control the speed/vibrations per minute (VPM) of up to two vibrators. The M-Box minimizes time and cost associated with patching structural concrete surface blemishes caused by excessive vibrator speeds.

In pumped concrete mixes, available/bleed water can be an issue. The faster the vibrator speed, the more water separation occurs and collects on the form faces. Chipping and patching labor and patch material can be expensive.

Minnich M-Box operators can select from speeds of 6,000, 8,000, and 10,800 VPM. The product converts the 230-volt, single-phase outlet of a 3,500-watt generator to 230-volt, three-phase output, allowing the operator to choose a uniform and compatible constant speed under different concrete loads.

“The M-Box gives our customers complete control of their concrete,” said Rob Minnich, vice president of marketing at Minnich Manufacturing. “By helping operators apply the most force with the lowest speed, the M-Box maximizes vibration quality — and, in turn, the quality of the concrete structure.”

For more information, call 419/903-0010 or visit minnich-mfg.com.




Today's top stories

WBEs Leave Mark On Kansas City Airport

Ditch Witch MT26 Microtrencher Provides Deepest Cut Option for Fiber Job Sites

Caterpillar Surpasses $3B Tonnes Hauled Autonomously by Cat Command for Hauling Trucks

Crews Construct Bridge Offsite, Float It Into Place

All-New Brandt Coupler Built for Safety, Optimized for Deere

VIDEO: Volvo CE Delivers Its Version of the Factory 4 Tomorrow

Brass Knuckle Splash Goggle/Face Shield-In-One is Force to Be Reckoned With

Brooks Breaks Ground in Sparta, Wisconsin


 






ceg-logo ceg-logo ceg-logo ceg-logo ceg-logo