2012 Caterpillar D4K XL For Sale in Indianapolis, IN



For Sale: $52,000.00 USD


MacAllister Machinery Co., Inc.

https://www.macallister.com


Contact: Used Equipment Team

Click for Phone Number

Machine Info:

Hours:4414
Serial Number:MMM00816
Machine Location:INDIANAPOLIS IN, 46219

Description:

AIR SUSPENSION SEATBLADE SHAKEBLADE, PATENGINE ENCLOSURESHAND AND FOOT CONTROLHYD CONTROLLIGHTINGOROPSPILOT CONTROLPRODUCT LINKRIPPER, MULTI SHSTABLE BLADE CONTROLSTEER, JOYSTICKSWEEPSULTRA LOW SULFUR DIESEL FUELXL

Machine Details:

GENERAL APPEARANCE
Cleaning RequiredNo
S.O.S. TakenYes
Cab or CanopyGood
DecalsFair - Decals are scratched. Missing decal on left rear compartment door
FendersGood
Fuel TankGood
Grab IronsGood
HoodGood
Main Frame WeldsGood
PaintFair - Paint is faded and normal wear and scratches
Sheet MetalGood
Steps / LadderFair - Steps are slightly bent
SAFETY ITEMS
ROPSYes
ROPS Certification PlateYes
Back Up AlarmGood
HornGood
Parking Brake - SAFETY ITEMSGood
GAUGES, OPERATOR STATION, CONSOLE
Current O&MMYes
Dash ConsoleGood
EMS Panel / WarningsGood
GaugesGood
HeaterGood
Seat Cushion / Arm RestGood
SwitchesFair - Switches work but faded and unable to be read
ENGINE
Blow ByNo
Compression in RadiatorNo
Fluid Levels OK?Yes
KnockingNo
Oil LeaksNo
Water in OilNo
Oil Pressure (H/L/N) - Normal
Air CleanersGood
Engine SupportsGood
Fuel Injection SystemGood
Operating Condition - ENGINEGood
Turbocharger / BlowerGood
COOLING SYSTEM
Leaks - COOLING SYSTEMNo
Standard RadiatorYes
Belts / Pulleys - COOLING SYSTEMGood
CoolersGood
FanGood
HosesGood
RadiatorGood
Water PumpGood
ELECTRICAL, STARTING AND CHARGING SYSTEM
Block HeaterYes
AlternatorGood
Batteries / CablesGood
StarterGood
WiringGood
TRANSMISSION
Leaks - TRANSMISSIONNo
Transmission - NoisyNo
CaseGood
Controls - TRANSMISSIONFair - Joystick has slight play but does not affect operation
CoolerGood
Lines / Fittings - TRANSMISSIONGood
Operating Condition - TRANSMISSIONGood
Pump - TRANSMISSIONGood
SealsGood
Temp / Pressure GaugesGood
Transmission - Forward ShiftsGood
Transmission - Reverse ShiftsGood
STEERING
Steering ClutchGood
Steering LinkageFair - Joystick has slight play internally but does not affect operation
Steering Operating ConditionGood
HYDRAULICS
Leaks - HYDRAULICSNo
Angle CylinderGood
Control Linkage - HYDRAULICSGood
Hose LinesGood
Lift CylindersGood
Overall Operating ConditionGood
Tilt CylinderGood
BLADE
Cutting Edge & BitsGood - New edges installed
Face / MoldboardFair - A couple small golf ball size dents in blade
PinsGood
Single TreeGood
TowerGood
TrunnionsGood
RIPPER / GRAPPLE / WINCH
Beam / FrameGood
Pins & BushingsGood
Ripper Lift CylinderGood
Shanks / GetGood - New teeth installed
UNDERCARRIAGE
Pins & Bushings Turned?No
Track Frame - LeftGood
Track Frame - RightGood
Carrier Rollers Front
Idlers Front
Links
Pins & Bushings (External)
Track Roller 1
Track Roller 2
Track Roller 3
Track Roller 4
Track Roller 5
Track Roller 6
Track Roller 7
FINAL DRIVES
Housings, LeftGood
Housings, RightGood
Planetaries / Differential, LeftGood
Planetaries / Differential, RightGood
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
comment 1 - PM2 performed at 4385 hours
comment 2 - New seatbelt installed
comment 3 - New gauge cluster installed
comment 4 - New GET on blade and ripper
comment 5 - PL240B location device registered


Specs from the manufacturer:

Dimensions
Ground Clearance1 ft (0 m)
Height - Top of Cab9 ft (3 m)
Length of Track on Ground8 ft (2 m)
Length w/ Blade14 ft (4 m)
Length w/o Blade11 ft (3 m)
Width Over Tracks6.6 ft in (17 cm)
Engine
Displacement269 cu in (0 m)
Engine ModelC4.4 ACERT
Gross Power92 hp (69 kw)
MakeCat
ModelC4.4 ACERT
Net Power84 hp (63 kw)
Number of Cylinders4
Power Measured @1,900 rpm
Hydraulic System
Pump Flow Capacity19 gal/min (73 l/min)
Relief Valve Pressure2,988 psi
Operating Specifications
1212 V V
120120 A
Cooling System Fluid Capacity6 gal (23 l)
Engine Oil Capacity3 gal (11 l)
Final Drives Fluid Capacity3 gal (10 l)
Fuel Capacity52 gal (195 l)
Hydraulic Fluid Capacity16 gal (59 l)
Operating Weight17,961 lbs (8,147 kg)
Standard Blade
Blade Angle (both directions)25 °
Capacity3 cu yds (2 m)
Height40 in (101 cm)
Width9 ft (3 m)
Transmission
Max Speed - Forward6 mph (9 kph)
Max Speed - Reverse6 mph (10 kph)
Number of Forward Gears2
Number of Reverse Gears2
Transmission TypeHydrostatic
Undercarriage
Ground Contact Area3,206 cu in (0 m)
Ground Pressure6 psi
Number of Shoes per Side43
Number of Track Rollers per Side7
Standard Shoe Size18 in (46 cm)
Track Gauge5 ft (2 m)

Dealer Contact Info:

MacAllister Machinery Co., Inc.

Fax: 317-860-3310



Contact: Used Equipment Team

Click for Phone Number