GENERAL APPEARANCE |
Cleaning Required | No |
S.O.S. Taken | No |
Bumper | Good |
Cab or Canopy | Poor |
Decals | Good - Light faded |
Draw Bar | Good |
Fuel Tank | Good |
Grab Irons | Good |
Hood | Good |
Paint | Fair - Light faded, paint chips and surface rust on lower machine areas |
Pre-Cleaner Bowl | Fair - Bowl cloudy |
Sheet Metal | Good |
Steps / Ladder | Good |
SAFETY ITEMS |
ROPS | Yes |
Back Up Alarm | Good - Backup alarm working |
Horn | Good - Working |
Parking Brake - SAFETY ITEMS | Good |
GAUGES, OPERATOR STATION, CONSOLE |
Dash Console | Good |
EMS Panel / Warnings | Good - EMS warning lights working |
Gauges | Good - All gauges working |
Glass/Mirrors | Good - Mirror in place |
Heater | Good |
Seat Cushion / Arm Rest | Good |
Switches | Good |
ENGINE |
Blow By | No - Slight |
Compression in Radiator | No |
Fluid Levels OK? | Yes |
Knocking | No |
Oil Leaks | No |
Water in Oil | No |
Notes - ENGINE | - Powered by caterpillar 3116. 6-cylinder turbo diesel, engine equipped with pre-lube system |
Oil Pressure (H/L/N) | - Warning light goes out when started |
Engine Supports | Good |
Fuel Injection System | Good |
Operating Condition - ENGINE | Good - Starts and runs good |
Turbocharger / Blower | Good |
COOLING SYSTEM |
Leaks - COOLING SYSTEM | No |
Standard Radiator | Yes |
Belts / Pulleys - COOLING SYSTEM | Good |
Fan | Good |
Hoses | Good |
Radiator | Good |
ELECTRICAL, STARTING AND CHARGING SYSTEM |
Block Heater | No |
Ether Aid | Yes |
Alternator | Good |
Batteries / Cables | Good |
Starter | Good |
Wiring | Good |
TRANSMISSION |
Leaks - TRANSMISSION | No |
Transmission - Noisy | No |
Case | Good |
Cooler | Good |
Lines / Fittings - TRANSMISSION | Good |
Operating Condition - TRANSMISSION | Good - Shifted good through speeds |
Pump - TRANSMISSION | Good |
Seals | Good |
Temp / Pressure Gauges | Good - Powertrain temperature gauge working |
Transmission - Forward Shifts | Good |
Transmission - Reverse Shifts | Good |
STEERING |
Steering Clutch | Good |
Steering Linkage | Good - Finger tip steering controls |
Steering Operating Condition | Good - Steers good |
BRAKE |
Notes - BRAKE | - Service and parking brake working good |
HYDRAULICS |
Notes - HYDRAULICS | - Auxiliary hydraulics plumbed to rear of machine, plumbed for ripper. |
Angle Cylinder | Good - Both dry |
Control Linkage - HYDRAULICS | Fair - Has some play in tee handle controls |
Hose Lines | Good |
Lift Cylinders | Good - Both dry |
Overall Operating Condition | Good - Hydraulic functions operated good |
Tilt Cylinder | Good - Dry |
BLADE |
Notes - BLADE | - 9’11ft wide blade |
Cutting Edge & Bits | Good - Been flipped, in good condition |
Face / Moldboard | Good - Face has been replated |
Pins | Good |
Push Arm | Good |
Tower | Good |
Trunnions | Good - Oscillating bearing recently replaced |
UNDERCARRIAGE |
Pins & Bushings Turned? | No |
Average Life Remaining - UNDERCARRIAGE | - 85% |
Notes - UNDERCARRIAGE 1 | - 41-link |
Track Frame - Left | Good |
Track Frame - Right | Good |
Carrier Rollers Front | |
Idlers Front | |
Idlers Rear | |
Links | |
Pins & Bushings (External) | |
Track Roller 7 | |
FINAL DRIVES |
Housings, Left | Good |
Housings, Right | Good |
COMMENTS, MISC. REPAIRS, GENERAL REMARKS |
comment 1 | - Runs and operates good |
comment 2 | - Tight machine |
comment 3 | - Well maintained |
comment 4 | - Just serviced |