1988 Caterpillar D6H For Sale

Detail photo of 1988 Caterpillar D6H from Construction Equipment Guide
Detail photo of 1988 Caterpillar D6H from Construction Equipment Guide Detail photo of 1988 Caterpillar D6H from Construction Equipment Guide Detail photo of 1988 Caterpillar D6H from Construction Equipment Guide Detail photo of 1988 Caterpillar D6H from Construction Equipment Guide Detail photo of 1988 Caterpillar D6H from Construction Equipment Guide

$49,500.00 USD

NMC CAT
www.nmccat.com


Click here to email
NMC CAT.


Rusty Rogers
402-891-7612

Hours: 12759

Serial Number: 3ZF00485

Stock Number: EQN051601

Caterpillar D6H Description: AIR CONDITIONER, BATTERY DISCONNECT KIT, BATTERY, HEAVY DUTY, BOLT ON EDGE, CAB, CYLINDER GUARDS, DRAWBAR, RIGID LONG, EDGE, ENCLOSURE, ENGINE, EXTENDED TRACK ROLLER FRAME-7R, GUARD, PRECLEANER, GUARD, RADIATOR,HINGED, HD, HIGH PRESSURE 12''10" STICK LINES, HIGH PRESSURE REACH BOOM LINES, HYD SYSTM, 2V (LIFT/TILT), INSTRUCTIONS, ENGLISH, KIT, DEFLECTOR, BA11, LIGHTS, MOUNT BRACKET GROUP, PLATE, SCREEN, REAR, TECHNOLOGY CONSTRUCTION, TOOL CONTROL, TRACK GUIDING GUARD(EXT.FRAME), TRACK, 24" (40 SEC) SALT,



GENERAL APPEARANCE
S.O.S. TakenNo
Cleaning RequiredYes
Notes - The small inspection panels from the side of the engine bay are missing at this time but appears that the customer has them
Sheet MetalGood
Steps / LadderGood
Engine DoorsGood
PaintFair - Paint has some scratches and scuffs present. Normal wear for the age and hours of the machine
Stump Pans / Screens / GuardsGood
Radiator Grill & ShroudGood
Pre-Cleaner BowlGood
Cab or CanopyGood
Grab IronsPoor - The cab landing grab irons are missing on both sides
Crankcase Guard / Battery BoxGood
Eng. Enclose Hood / StackFair - The exhaust stack is bent
Main Frame WeldsGood - No visible defects are present
Fuel TankGood
Draw BarGood
SAFETY ITEMS
ROPSYes - The ROPS certification tag is worn and not legible. FOPS certification; ISO 3449:1984
HornGood
GAUGES, OPERATOR STATION, CONSOLE
Seat Cushion / Arm RestFair - The left arm rest is torn. The seat suspension is worn and loose
MeterGood
SwitchesGood
Dash ConsoleGood
Glass/MirrorsFair - The left door glass is cracked
GaugesFair - The hydraulic oil temperture gauge has been replaced with an engine coolant temperture gauge at some point and is also inoperative
Door LatchesGood
Air ConditionerPoor - The air conditioner is inoperative
Seat BeltPoor - The seat belt has some fraying present. Seat belt certification year; 1987
EMS Panel / WarningsFair - The EMS panel and action lamp are in working condition, the action alarm is inoperative
HeaterGood
Current O&MMNo
Current Safety ManualNo
Back Up AlarmNo - The machine is equipped with a back up alarm but it is inoperative at this time
Notes - The wiper arm assemblies are missing from both doors. The wiper motor runs on both doors but the shaft is not rotating on the left door. The headliner is torn and falling down. The instrument panel la
ENGINE
Air CleanersFair - Normal use
Exhaust / MufflerGood
Belts / PulleysGood
Notes - The engine crankcase breather is broke
Fluid Levels OK?Yes
KnockingNo
Blow ByYes - Minor to moderate blow by is present
Water in OilNo
Oil LeaksNo
Smoke (B/D/L/W) - Normal
Anti-Freeze Color - Red
Oil Pressure (H/L/N) - Normal
COOLING SYSTEM
LeaksNo
RadiatorGood - The machine is equipped with a folded core radiator
HosesGood
ELECTRICAL, STARTING AND CHARGING SYSTEM
Ether AidYes
WiringFair - There is some minor wiring abrasions near the batteries. There is also some wires hanging around the fuel tank area
AlternatorGood
Batteries / CablesGood
StarterGood
TRANSMISSION
LeaksNo
Transmission - NoisyNo
CaseGood
Torque ConverterGood
ControlsFair - The direction control linkage is stiff and difficult to operate
Transmission - Reverse ShiftsGood
SealsGood
Lines / FittingsGood
Transmission - Forward ShiftsGood - 3 speeds forward
STEERING
Differential SteerGood
Steering LinkageGood
Steering Operating ConditionGood
BRAKE
LinesGood
Operating ConditionGood
Holding What Gear? - 2nd
HYDRAULICS
LeaksNo
TankGood
Lift CylindersGood
Control LinkageFair - The ripper control is missing the correct linkage and handle. There has been an alternate control handle installed on the dozer valve but is fully operable
Tilt CylinderFair - The tilt cylinder has had a fair amount of welding performed on the barrel
Hose LinesGood
Pumps & ValvesGood
Overall Operating ConditionGood
BLADE
Cutting Edge & BitsFair - Bolt-on cutting edges are worn an estimated 40%
Face / MoldboardFair - The blade face has had some wleing performed on it where it has broke out around the inner supports. There has been a patch installed on the back side of the blade in each corner
PinsFair - The blade lift cylinder sockets, blade trunnions, and blade lift cylinder yoke bushings are worn and loose
Notes - The blade sides are worn back
UNDERCARRIAGE
Link Part Number - 8E-7405, 8E-7406
Cannon - Good condition
Pivot Shaft - Good condition
Equalizer Bar - Good condition
Track Shoes - The wiper edge of the pad has a fair amount of scalloping present
Track Frame - LeftGood
Track Frame - RightGood
Track Roller 3
Pins & Bushings (External)
Segments
Links
Track Roller 1
Track Roller 2
Idlers Front
Track Shoes (Width)
Idlers Rear
Track Roller 6
Track Roller 7
Track Roller 5
Track Roller 4
Pins & Bushings Turned?No


Dealer Contact Info:

NMC CAT

Click here for more information about NMC CAT

www.nmccat.com
11002 Sapp Brothers Drive
Omaha NE , 68138
Ph: 402-891-7612


Contact: Rusty Rogers
Phone: 402-891-7612