2006 Caterpillar D6N For Sale

Detail photo of 2006 Caterpillar D6N from Construction Equipment Guide
Detail photo of 2006 Caterpillar D6N from Construction Equipment Guide Detail photo of 2006 Caterpillar D6N from Construction Equipment Guide Detail photo of 2006 Caterpillar D6N from Construction Equipment Guide Detail photo of 2006 Caterpillar D6N from Construction Equipment Guide Detail photo of 2006 Caterpillar D6N from Construction Equipment Guide Detail photo of 2006 Caterpillar D6N from Construction Equipment Guide Detail photo of 2006 Caterpillar D6N from Construction Equipment Guide Detail photo of 2006 Caterpillar D6N from Construction Equipment Guide Detail photo of 2006 Caterpillar D6N from Construction Equipment Guide Detail photo of 2006 Caterpillar D6N from Construction Equipment Guide Detail photo of 2006 Caterpillar D6N from Construction Equipment Guide Detail photo of 2006 Caterpillar D6N from Construction Equipment Guide Detail photo of 2006 Caterpillar D6N from Construction Equipment Guide Detail photo of 2006 Caterpillar D6N from Construction Equipment Guide

$55,000.00

Altorfer Cat
http://www.altorfer.com


Click here to email
Altorfer Cat.


Wm. E. Musgrave
800-333-5993

Hours: 9991

Serial Number: ALY02241

Stock Number: 171U049

Caterpillar D6N Description: EROPS, AIR CONDITIONER, BLADE, PAT, DRAWBAR, SWEEPS, AUXILIARY HYDRAULICS, DIFF STEER, ENGINE ENCLOSURES, LIGHTING, PICTURES AS OF: 7/20/17 9993 HOURS,



GENERAL APPEARANCE
S.O.S. TakenNo
Cleaning RequiredYes
Sheet MetalFair - fuel tank guard is slightly pushed in - usable
HoodGood - no damage
Engine DoorsPoor - both bent with the latches broken - left is worse - should be replaced
Steps / LadderGood - secure - no damage
PaintFair - slightly faded - some scratches
Stump Pans / Screens / GuardsGood - installed and straight
FendersFair - no damage - doors attached to the fenders are loose - hinges worn
Radiator Grill & ShroudGood - straight - no damage
Cab or CanopyPoor - very dirty - headliner is stained - upholstery is torn
DecalsPoor - faded and peeled off - need replaced
Grab IronsGood - straight and secure
Crankcase Guard / Battery BoxGood - clean - rear tran. cover door latch is broken
Eng. Enclose Hood / StackGood - no damage to the top - stack is straight
Main Frame WeldsGood - no visible cracks or damage
Fuel TankFair - cap needs replaced - no leaks
Draw BarFair - no pin installed - latch for pin is frozen
SAFETY ITEMS
ROPSYes
Safety Decals LegibleYes
Safety Decals In PlaceYes
Secondary ExitGood
HornFair - working - horn button missing
GAUGES, OPERATOR STATION, CONSOLE
Seat Cushion / Arm RestFair - cloth worn and dirty - seat is loose and the stop bolt is missing - slides need replaced
MeterFair - Meter readings not in sync - 9,993 on monitor - 11,066 on Engine - 10,271 on Tran.
Dash ConsoleFair - dirty - crack in plastic
Glass/MirrorsGood - no cracks or damage
Seat BeltGood - latches - April 2010
EMS Panel / WarningsGood - working
Floor BoardsPoor - mat torn - large portion missing -needs replaced -- holes cut in floor plates and bolts missing
Interior LightsGood - working
Windshield WipersFair - working - blades need replaced
SwitchesGood - no damage - all working
GaugesFair - active code for tran. temp. sender // 177-4
Door LatchesPoor - right door striker worn and sticking - left door is missing the "hold open" latch and handle - door seals torn
Air ConditionerGood - cooling
HeaterGood - fan working in all speeds
Current O&MMNo
Current Safety ManualNo
Current Parts ManualNo
ROPS Certification PlateNo
Back Up AlarmYes - working
Notes - bars welded on the cab structure on the front inside - AM/FM radio not working
ENGINE
Fuel Injection SystemGood - no external leaks
Air CleanersGood - no damage
Turbocharger / BlowerGood - no leaks or damage
Exhaust / MufflerPoor - bottom is cracked
Operating ConditionGood - starts and runs out normally
GovernorGood - full RPM range - decel pedal working
Belts / PulleysGood - no noises
Engine SupportsGood - secure
Fluid Levels OK?Yes
KnockingNo
Compression in RadiatorNo
Blow ByNo
Water in OilNo
Oil LeaksNo
Smoke (B/D/L/W) - Normal
Anti-Freeze Color - ELC
Oil Pressure (H/L/N) - Normal
COOLING SYSTEM
LeaksNo
Modular RadiatorNo
Folded Core RadiatorNo
Standard RadiatorYes
CoolersGood - clean
Fan DriveGood - no noises
RadiatorGood - no leaks or damage
FanGood - no damage
Water PumpGood - dry
HosesGood - dry
ELECTRICAL, STARTING AND CHARGING SYSTEM
Ether AidNo
Block HeaterNo
LightingGood - 4 front - 2 rear - all working
WiringFair - harness going into the transmission is tapped up
Pre-HeaterGood - working
AlternatorGood - charging
Batteries / CablesNew - new batteries and hold down installed
StarterGood - no drag
TRANSMISSION
Transmission Type - Powershift
LeaksYes - oil on bottom guard under the tran. line area
Transmission - NoisyNo
CaseGood - no visible damage
Operating ConditionGood - lag time when shifting into gear - valves need to be calibrated
Torque ConverterGood - stall is ok - cools quickly
CoolerGood
ControlsFair - tiller handle sticks in the full left position
Universal JointsGood - no noises
Temp / Pressure GaugesFair - tran. temp not working
SealsGood
Transmission - Reverse ShiftsGood - 3 speeds
PumpGood - no noise
Transmission - Forward ShiftsGood - 3 speeds
Lines / FittingsFair - possibly leaking
STEERING
Differential SteerGood
Steering Operating ConditionGood - good turning power
Differential Steer Pump/MotorGood - no noises
Differential Steering ControlsFair - handle sticks to the left
BRAKE
Control ValveGood
Type (Pedal, Lever)Good - pedal
Type (Wet, Dry)Good - wet
Parking BrakeGood - holding
PumpGood
Operating ConditionGood - normal
Holding What Gear? - 2nd
HYDRAULICS
LeaksNo
TankGood - no leaks or damage
Lift CylindersFair - dry - bearings loose - fittings leaking - bolts missing from covers
Control LinkageGood - no damage
Tilt CylinderGood - dry
Hose LinesGood
Pumps & ValvesGood - no noises or leaks
Overall Operating ConditionGood - all functions working
Angle CylinderGood - dry
Notes - ripper control handle installed
BLADE
DraglinkGood - looks re-done
Single TreePoor
Cutting Edge & BitsPoor - 20% remaining - already turned
TowerPoor - center bering boss cut and re-welded - needs replaced
Face / MoldboardGood - push plate welded on front
PinsFair - movement felt
C FramePoor - excessive movement in main pins - line boreing needed
Spill RackFair - slightly bent - usable
UNDERCARRIAGE
Pins & Bushings (Internal) - Good
Link Part Number - 417-3595 / 96 -- 7.5" pitch
Cannon - right side seal leaking - both holding
Pivot Shaft - No oil in either side - needs repair
Equalizer Bar - center ok - left side has excessive movement - frame needs line bored
Track Shoes - SG - 34" 1 pad bent on the left
Notes - #1 right bottom roller failed
Track Frame - LeftPoor - no oil in pivot shaft
Track Frame - RightPoor - no oil in pivot shaft - frame needs line bored for equalizer bar pin
Track Roller 8
Pins & Bushings (Internal)
Track Roller 3
Pins & Bushings (External)
Links
Segments
Track Roller 1
Track Roller 2
Idlers Front
Track Shoes (Width)
Idlers Rear
Carrier Rollers Front
Track Roller 6
Track Roller 7
Track Roller 5
Track Roller 4
Notes - Measurments in MM with ultrasonic tool
Pins & Bushings Turned?No
FINAL DRIVES
Housings, RightGood - no damage or leaks
Planetaries / Differential, LeFair - pin caps are siliconed in
Planetaries / Differential, RiFair - pin caps are siliconed in
Housings, LeftGood - no damage or leaks


Dealer Contact Info:

Altorfer Cat

Click here for more information about Altorfer Cat

http://www.altorfer.com
2600 6th Street SW
Cedar Rapids IA , 52404
Ph: 800-333-5993
Fax: 319-365-5639


Contact: Wm. E. Musgrave
Phone: 800-333-5993