2014 Caterpillar D6N XL For Sale in Cedar Rapids, IA



For Sale: $165,000.00 USD


Altorfer Cat

https://www.altorfer.com


Contact: Wm. E. Musgrave

Click for Phone Number

Machine Info:

Hours:2319
Serial Number:PER00727
Stock Number:191U055
Machine Location:CEDAR RAPIDS, IA 52404

Description:

DRAWBARENGINE ENCLOSURESEPA LABELEROPSLIGHTINGPRODUCT LINKULTRA LOW SULFUR DIESEL FUELXLACCUGRADE READYAIR CONDITIONERAIR SUSPENSION SEATAM FM CD RADIOANTI-THEFT SYSTEMAUXILIARY HYDRAULICSBLADE, PATBLADE, SDIFF STEERBLADE SHAKE

Machine Details:

GENERAL APPEARANCE
Cleaning RequiredNo
Cab or CanopyGood - No damage.
DecalsGood - Minor fading/peeling.
Draw BarGood - Bends in drawbar step.
FendersGood - Straight, no damage.
Fuel TankGood - No leaks.
Grab IronsGood - All straight.
HoodGood - Straight, no damage.
Main Frame WeldsGood
PaintFair - Minor fading, some surface rust around cab steps/lower door frames.
Steps / LadderGood - No damage.
SAFETY ITEMS
ROPSYes
ROPS Certification PlateYes
Back Up AlarmGood - Working correctly.
HornGood - Working correctly.
Parking Brake - SAFETY ITEMSGood - Operates correctly.
GAUGES, OPERATOR STATION, CONSOLE
Current O&MMYes
Current Parts ManualYes - Parts CD.
Current Safety ManualYes
Air ConditionerGood - Working.
Dash ConsoleGood - Consoles and interior panels are clean and in good condition.
EMS Panel / WarningsGood - Warning lights and alarm working correctly.
GaugesGood - All working.
Glass/MirrorsGood
HeaterGood - All fan speeds working correctly.
Interior LightsGood
Seat Cushion / Arm RestGood - Cloth seat, good condition.
SwitchesGood
Windshield WipersGood - All working.
ENGINE
Blow ByNo
Fluid Levels OK?Yes
KnockingNo
Oil LeaksNo
Oil Pressure (H/L/N) - Normal, 82 psi.
Air CleanersGood
Fuel Injection SystemGood - No leaks.
Operating Condition - ENGINEGood - Engine starts and runs correctly.
Turbocharger / BlowerGood - No leaks.
COOLING SYSTEM
Leaks - COOLING SYSTEMNo
Standard RadiatorYes
Belts / Pulleys - COOLING SYSTEMGood
CoolersGood - No damage/leaks.
FanGood
HosesGood - Good condition, no leaks.
RadiatorGood - No damage/leaks.
ELECTRICAL, STARTING AND CHARGING SYSTEM
Block HeaterYes
Ether AidYes
AlternatorGood - Charging correctly, 27.5 volts.
Batteries / CablesGood - Clean, no corrosion.
StarterGood
WiringGood - No visible issues.
TRANSMISSION
Leaks - TRANSMISSIONNo
Transmission - NoisyNo
Controls - TRANSMISSIONGood - No looseness.
Operating Condition - TRANSMISSIONGood - Machine drives and shifts correctly through all gears.
SealsGood - No evidence of leaks.
Temp / Pressure GaugesGood
Transmission - Forward ShiftsGood - Shifts correctly/smoothly.
Transmission - Reverse ShiftsGood - Shifts correctly/smoothly.
STEERING
Differential Steering ControlsGood - No looseness.
Steering Operating ConditionGood - Diff steer, machine steers correctly/smoothly.
BRAKE
Holding What Gear? - 1.5
HYDRAULICS
Leaks - HYDRAULICSNo
Angle CylinderGood - Both are dry.
Control Linkage - HYDRAULICSGood - No looseness.
Hose LinesGood - No damage/leaks.
Lift CylindersGood - Both are dry.
Overall Operating ConditionGood - Hydraulic functions operate correctly.
Tilt CylinderGood - Dry.
BLADE
Cutting Edge & BitsGood - 50% remaining, not flipped.
Face / MoldboardGood - Minor dents/rolling at edges.
KnuckleGood - No looseness.
PinsGood - Minor looseness in tilt cylinder pins.
UNDERCARRIAGE
Carrier Rollers - CAT system-one sealed rollers.
Equalizer Bar - Good, no looseness.
Pivot Shaft - Good, no leaks.
Segments - Minor wear.
Track Frame - LeftGood - No damage.
Track Frame - RightGood - No damage.
Carrier Rollers Front
Idlers Front
Idlers Rear
Links
Pins & Bushings (External)
Segments
Track Roller 1
Track Roller 2
Track Roller 3
Track Roller 4
Track Roller 5
Track Roller 6
Track Roller 7
FINAL DRIVES
Housings, LeftGood - No damage/leaks.
Housings, RightGood - No damage/leaks.
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
comment 1 - Inspected 2-11-20 at 2098 hrs.


Specs from the manufacturer:

Dimensions
Drawbar Height (Center of Clevis) from Ground Face of Shoes24 in (60 cm)
Ground Clearance1 ft (0 m)
Height - Top of Cab10 ft (3 m)
Length - Track on Ground100 in (255 cm)
Length of Track on Ground9 ft (3 m)
Length w/o Blade12 ft (4 m)
Track Gauge6 ft (2 m)
Width Over Tracks8.2 ft in (21 cm)
Engine
Bore4 in (11 cm)
Displacement439 cu in (0 m)
Engine ModelCat 3126B DITAAC
Flywheel Power145 hp (108 kw)
MakeCat
ModelC7.1 ACERT
Net Power145 hp (108 kw)
Net Power - EU 80/1269145 hp (108 kw)
Net Power - ISO 9249145 hp (108 kw)
Net Power - SAE J1349143 hp (107 kw)
Number of Cylinders6
Power Measured @2,200 rpm
Stroke5 in (13 cm)
Operating Specifications
Alternator Supplied Amperage70 A
Cooling System Fluid Capacity9 gal (35 l)
Final Drives Fluid Capacity2 gal (7 l)
Fuel Capacity79 gal (299 l)
Hydraulic Fluid Capacity8 gal (30 l)
Operating Voltage12 V V
Operating Weight36,392 lbs (16,507 kg)
Ripper
Beam Cross Section216x254 mm 8.5x10.0 in
Number of Pockets3
Overall Beam Width87 in (220 cm)
Ripper TypeFixed Parallelogram
Weight - Each Additional Shank172 lbs (78 kg)
Service Refill Capacities
Cooling System11 gal (41 l)
Final Drive - Each2 gal (7 l)
Fuel Tank79 gal (299 l)
Hydraulic Tank8 gal (30 l)
Standard Blade
Capacity4 cu yds (3 m)
Height49 in (124 cm)
Width11 ft (3 m)
Transmission
1 Forward2 mph (3 kph)
1 Reverse3 mph (4 kph)
2 Forward4 mph (6 kph)
2 Reverse4 mph (7 kph)
3 Forward6 mph (10 kph)
3 Reverse7 mph (12 kph)
Max Speed - Forward6 mph (10 kph)
Max Speed - Reverse8 mph (12 kph)
Number of Forward Gears3
Number of Reverse Gears3
Transmission Typepowershift
Undercarriage
Ground Contact Area4,882 cu in (0 m)
Ground Pressure7 psi
Grouser Height2 in (6 cm)
Number of Shoes per Side40
Number of Track Rollers per Side7
Standard Shoe Size24 in (61 cm)
Track Gauge6 ft (2 m)
Winch
Drum Diameter10 in (25 cm)
Drum Width12 in (32 cm)
Flange Diameter20 in (50 cm)
Oil Capacity20 gal (74 l)
Weight2,814 lbs (1,276 kg)
Winch and Bracket Length45 in (115 cm)
Winch Case - Width38 in (98 cm)

Dealer Contact Info:

Altorfer Cat

Fax: 319-365-5639



Contact: Wm. E. Musgrave

Click for Phone Number







ceg-logo ceg-logo ceg-logo ceg-logo ceg-logo