List and Sell Your Equipment  /  Dealer Login  /  Create Account
This machine has been sold.

2006 Caterpillar D6NXL



MACHINE SOLD



Machine Info:

Hours:9572
Serial Number:AKM02213
Stock Number:MC036090
Machine Location:CONCORD, ONTARIO, CANADA L4K5E1

Description:

AIR CONDITIONERAIR SUSPENSION SEATAM FM CD RADIOAUXILIARY HYDRAULICSBLADE, PATENGINE ENCLOSURESEROPSLIGHTINGXLHYDRAULICS, 4 VALVE, 6VPATEPA TIER 2

Machine Details:

GENERAL APPEARANCE
Cleaning RequiredYes
S.O.S. TakenNo
Notes - GENERAL APPEARANCE - Lots of bumps and dings/ bent steps and handles. Door hinges sticky and access panels not secured on machine.
BumperFair
Cab or CanopyFair - Large dent noted in pictures
CounterweightFair
DecalsFair
Draw BarFair
FendersPoor
Fuel TankFair
Grab IronsPoor
HoodFair
Main Frame WeldsFair
PaintPoor
Sheet MetalPoor
Steps / LadderPoor
SAFETY ITEMS
ROPSYes
Back Up AlarmPoor
Parking Brake - SAFETY ITEMSGood
GAUGES, OPERATOR STATION, CONSOLE
Air ConditionerPoor
Dash ConsoleFair
EMS Panel / WarningsFair
GaugesFair
Glass/MirrorsFair
HeaterPoor
Seat Cushion / Arm RestGood
SwitchesFair
Windshield WipersFair
ENGINE
Blow ByNo
Compression in RadiatorNo
KnockingNo
Oil LeaksNo
Notes - ENGINE - Engine seems to run as it should.
Air CleanersFair
Engine SupportsFair
Fuel Injection SystemFair
Operating Condition - ENGINEFair
Turbocharger / BlowerFair
COOLING SYSTEM
Notes - COOLING SYSTEM - No visible leaks
ELECTRICAL, STARTING AND CHARGING SYSTEM
AlternatorFair
Batteries / CablesGood
StarterGood
WiringFair
TRANSMISSION
Notes - TRANSMISSION - Transmission seems to function as it should.
STEERING
Notes - STEERING - Steering functions as it should.
BRAKE
Notes - BRAKE - Brake seemed weak and wanted to creep while in gear
HYDRAULICS
Notes - HYDRAULICS - Hydraulics seem to function as they should
BLADE
Notes - BLADE - Mouldboard in decent shape. Quite a bit of Play and creaking and clunking when angling blade up and down.
UNDERCARRIAGE
Average Life Remaining - UNDERCARRIAGE - 40%?
Notes - UNDERCARRIAGE - UC looked to be in decent shape. System one so hard to tell as they don’t show much wear visibly. XL bottom
FINAL DRIVES
Notes - FINAL DRIVES - Seem to function as they should.
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
comment 1 - Blade function works but shows wear/ noise. Brakes seem to just hold back machine in gear. UC looks decent but is hard to tell because of system one.


Specs from the manufacturer:

Dimensions
Drawbar Height (Center of Clevis) from Ground Face of Shoes24 in (60 cm)
Ground Clearance1 ft (0 m)
Height - Top of Cab10 ft (3 m)
Length - Track on Ground100 in (255 cm)
Length of Track on Ground9 ft (3 m)
Length w/o Blade12 ft (4 m)
Track Gauge6 ft (2 m)
Width Over Tracks8.2 ft in (21 cm)
Engine
Bore4 in (11 cm)
Displacement439 cu in (0 m)
Engine ModelCat 3126B DITAAC
Flywheel Power145 hp (108 kw)
MakeCat
ModelC7.1 ACERT
Net Power145 hp (108 kw)
Net Power - EU 80/1269145 hp (108 kw)
Net Power - ISO 9249145 hp (108 kw)
Net Power - SAE J1349143 hp (107 kw)
Number of Cylinders6
Power Measured @2,200 rpm
Stroke5 in (13 cm)
Operating Specifications
Alternator Supplied Amperage70 A
Cooling System Fluid Capacity9 gal (35 l)
Final Drives Fluid Capacity2 gal (7 l)
Fuel Capacity79 gal (299 l)
Hydraulic Fluid Capacity8 gal (30 l)
Operating Voltage12 V V
Operating Weight36,392 lbs (16,507 kg)
Ripper
Beam Cross Section216x254 mm 8.5x10.0 in
Number of Pockets3
Overall Beam Width87 in (220 cm)
Ripper TypeFixed Parallelogram
Weight - Each Additional Shank172 lbs (78 kg)
Service Refill Capacities
Cooling System11 gal (41 l)
Final Drive - Each2 gal (7 l)
Fuel Tank79 gal (299 l)
Hydraulic Tank8 gal (30 l)
Standard Blade
Capacity4 cu yds (3 m)
Height49 in (124 cm)
Width11 ft (3 m)
Transmission
1 Forward2 mph (3 kph)
1 Reverse3 mph (4 kph)
2 Forward4 mph (6 kph)
2 Reverse4 mph (7 kph)
3 Forward6 mph (10 kph)
3 Reverse7 mph (12 kph)
Max Speed - Forward6 mph (10 kph)
Max Speed - Reverse8 mph (12 kph)
Number of Forward Gears3
Number of Reverse Gears3
Transmission Typepowershift
Undercarriage
Ground Contact Area4,882 cu in (0 m)
Ground Pressure7 psi
Grouser Height2 in (6 cm)
Number of Shoes per Side40
Number of Track Rollers per Side7
Standard Shoe Size24 in (61 cm)
Track Gauge6 ft (2 m)
Winch
Drum Diameter10 in (25 cm)
Drum Width12 in (32 cm)
Flange Diameter20 in (50 cm)
Oil Capacity20 gal (74 l)
Weight2,814 lbs (1,276 kg)
Winch and Bracket Length45 in (115 cm)
Winch Case - Width38 in (98 cm)

Dealer Contact Info:

Toromont Cat

Fax: 416-667-5637



Contact: Support

Click for Phone Number







ceg-logo ceg-logo ceg-logo ceg-logo ceg-logo