1999 Caterpillar D6RXL For Sale in Indianapolis, IN



For Sale: $50,000.00 USD


MacAllister Machinery Co., Inc.

https://www.macallister.com


Contact: Used Equipment Team

Click for Phone Number

Machine Info:

Hours:15044
Serial Number:5LN02300
Machine Location:INDIANAPOLIS IN, 46219

Description:

AIR CONDITIONERBLADE, SEMI UDIFF STEERDRAWBAREROPSXL

Machine Details:

GENERAL APPEARANCE
BumperGood
Cab or CanopyGood
Draw BarGood
FendersFair - Minor damage.
Fuel TankGood
Grab IronsFair
HoodGood
Main Frame WeldsGood
PaintPoor
Steps / LadderGood
SAFETY ITEMS
ROPSYes
ROPS Certification PlateYes
Back Up AlarmPoor - INOP
HornGood
Parking Brake - SAFETY ITEMSGood
GAUGES, OPERATOR STATION, CONSOLE
Dash ConsoleGood
EMS Panel / WarningsFair - Multiple service codes.
GaugesFair - Fuel gauge is erratic.
Glass/MirrorsGood
HeaterGood
Seat Cushion / Arm RestGood
SwitchesGood
Windshield WipersFair - LH door wiper is INOP.
ENGINE
Blow ByNo
Compression in RadiatorNo
Fluid Levels OK?Yes
KnockingNo
Oil LeaksYes - Minor leak at injection pump.
Water in OilNo
Air CleanersGood
Engine SupportsGood
Fuel Injection SystemGood
Operating Condition - ENGINEGood
Turbocharger / BlowerGood
COOLING SYSTEM
Leaks - COOLING SYSTEMNo
Belts / Pulleys - COOLING SYSTEMGood
CoolersGood
FanGood
RadiatorGood
Water PumpGood
ELECTRICAL, STARTING AND CHARGING SYSTEM
AlternatorGood
Batteries / CablesGood
StarterGood
TRANSMISSION
Leaks - TRANSMISSIONYes - Multiple leaks.
Transmission - NoisyNo
CaseGood
Controls - TRANSMISSIONGood
CoolerGood
Operating Condition - TRANSMISSIONGood
Transmission - Forward ShiftsGood
Transmission - Reverse ShiftsGood
STEERING
Differential SteerGood
Differential Steering ControlsGood
Steering Operating ConditionGood
HYDRAULICS
Leaks - HYDRAULICSYes - Major leaks in filter/ valve area.
Control Linkage - HYDRAULICSFair - Significant play.
Lift CylindersPoor - Leaking.
Overall Operating ConditionGood
Tilt CylinderFair - Seeping.
BLADE
Cutting Edge & BitsGood
Face / MoldboardGood
PinsPoor - Loose throughout.
Push ArmGood
TrunnionsFair - Play throughout and no shims remain at rear of push arms.
UNDERCARRIAGE
Notes - UNDERCARRIAGE 1 - Undercarriage is aftermarket and was replaced 1400 hours ago. No problems noted other than grousers are extremely worn.
Pivot Shaft - Leaking.
FINAL DRIVES
Housings, LeftGood
Housings, RightGood
Planetaries / Differential, LeftGood
Planetaries / Differential, RightGood
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
comment 1 - Customer has compete service records.
comment 2 - Machine runs and shifts fine but has significant hydraulic leaks throughout.


Specs from the manufacturer:

Dimensions
Ground Clearance1 ft (0 m)
Height - Top of Cab11 ft (3 m)
Length of Track on Ground9 ft (3 m)
Length w/ Blade18 ft (5 m)
Length w/o Blade13 ft (4 m)
Width Over Tracks8.1 ft in (21 cm)
Engine
AspirationTurbocharged
Displacement641 cu in (0 m)
Engine Model3306 T
Flywheel Power175 hp (131 kw)
Gross Power189 hp (141 kw)
Maximum Flywheel Power189 hp (141 kw)
Net Power175 hp (131 kw)
Number of Cylinders6
Power Measured @1,900 rpm
Hydraulic System
Pump Flow Capacity50 gal/min (190 l/min)
Pump typePiston
Relief Valve Pressure2,800 psi
Operating Specifications
Alternator Supplied Amperage70 A
Cooling System Fluid Capacity20 gal (74 l)
Engine Oil Capacity7 gal (28 l)
Final Drives Fluid Capacity4 gal (14 l)
Fuel Capacity101 gal (383 l)
Hydraulic Fluid Capacity20 gal (76 l)
Operating Voltage24 V V
Operating Weight41,900 lbs (19,006 kg)
Ripper
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole20 in (51 cm)
Maximum Penetration20 in (50 cm)
Number of Pockets3
Overall Beam Width87 in (220 cm)
Ripper TypeParallelogram
Service Refill Capacities
Cooling System20 gal (74 l)
Engine Crankcase7 gal (28 l)
Final Drive - Each4 gal (14 l)
Fuel Tank101 gal (383 l)
Hydraulic Tank20 gal (76 l)
Power Train41 gal (155 l)
Standard Blade
Capacity7 cu yds (6 m)
Height56 in (141 cm)
Width11 ft (3 m)
Transmission
1 Forward3 mph (4 kph)
1 Reverse3 mph (5 kph)
2 Forward4 mph (7 kph)
2 Reverse5 mph (9 kph)
3 Forward7 mph (11 kph)
3 Reverse9 mph (15 kph)
Max Speed - Forward7 mph (12 kph)
Max Speed - Reverse10 mph (15 kph)
Number of Forward Gears3
Number of Reverse Gears3
Transmission TypePower Shift
Undercarriage
Ground Clearance1 ft (0 m)
Ground Contact Area4,888 cu in (0 m)
Ground Pressure9 psi
Number of Shoes per Side41
Number of Track Rollers per Side7
Standard Shoe Size22 in (56 cm)
Track Gauge6 ft (2 m)
Track Pitch8 in (20 cm)
Winch
Drum Diameter10 in (26 cm)
Drum Width10 in (25 cm)
Flange Diameter13 in (33 cm)
Increased Tractor Length - STD20 in (52 cm)
Oil Capacity18 gal (67 l)
Weight2,502 lbs (1,135 kg)
Winch and Bracket Length47 in (120 cm)
Winch Case - Width38 in (98 cm)

Dealer Contact Info:

MacAllister Machinery Co., Inc.

Fax: 317-860-3310



Contact: Used Equipment Team

Click for Phone Number







ceg-logo ceg-logo ceg-logo ceg-logo ceg-logo