Caterpillar D6T XW For Sale in Bellevue, IA

For Sale: $198,000.00 USD

J.J. Scheckel

Contact: Josh Scheckel

Click for Phone Number

Machine Info:

Stock Number:A02912
Machine Location:BELLEVUE, IA 52031


2013 Cat D6T XW, VPAT, 6,500 hours, ARO Accugrade GPS Ready, less than 300 hours on 100% New undercarriage and Engine Rebuild. Multi Shank Ripper, Machine is good as they come, straight, clean & original with documented history. Rent or Buy.

Engine in-frame Rebuild and injectors replaced less than 100 hours ago
• 6,444 Total Hours, ECM verified
• 2,000 hours where at Idle, ECM verified
• 4,444 actual “ in operation” hours on this machine

• 1,382 average lifetime RPM, as recorded by the ECM
• 5.15 gallons per Hour, average lifetime fuel Rate, as recorded by the ECM
• 44% average lifetime load factor, as recorded by the ECM

• Original Paint, Original condition machine

• 100% New Undercarriage installed less than 300 hours ago. All other measurements listed below

• Factory ARO, Cat Accugrade GPS Ready

Specs from the manufacturer:

Ground Clearance1 ft (0 m)
Height - Top of Cab11 ft (3 m)
Length of Track on Ground10 ft (3 m)
Length w/o Blade13 ft (4 m)
Width Over Tracks9.2 ft in (23 cm)
Displacement537 cu in (0 m)
Engine ModelC9 ACERT
Gross Power228 hp (170 kw)
ModelC9.3 ACERT
Net Power200 hp (149 kw)
Number of Cylinders6
Power Measured @1,850 rpm
Hydraulic System
Pump Flow Capacity50 gal/min (189 l/min)
Relief Valve Pressure2,799 psi
Operating Specifications
Alternator Supplied Amperage95 A
Cooling System Fluid Capacity19 gal (70 l)
Engine Oil Capacity7 gal (28 l)
Final Drives Fluid Capacity4 gal (14 l)
Fuel Capacity112 gal (424 l)
Hydraulic Fluid Capacity14 gal (51 l)
Operating Voltage24 V V
Operating Weight48,909 lbs (22,185 kg)
Standard Blade
Capacity6 cu yds (4 m)
Height46 in (117 cm)
Width14 ft (4 m)
Max Speed - Forward7 mph (12 kph)
Max Speed - Reverse9 mph (15 kph)
Number of Forward Gears3
Number of Reverse Gears3
Transmission TypePowershift
Ground Contact Area6,780 cu in (0 m)
Ground Pressure7 psi
Number of Shoes per Side41
Number of Track Rollers per Side7
Standard Shoe Size30 in (76 cm)
Track Pitch8 in (20 cm)

Dealer Contact Info:

J.J. Scheckel

Fax: 563-872-5058

Contact: Josh Scheckel

Click for Phone Number

ceg-logo ceg-logo ceg-logo ceg-logo ceg-logo