This machine has been sold.

2008 Caterpillar D9T



MACHINE SOLD


MacAllister Machinery Co., Inc.

https://www.macallister.com


Contact: Used Equipment Team

Click for Phone Number

Machine Info:

Hours:24233
Serial Number:RJS00981
Machine Location:INDIANAPOLIS IN, 46219

Description:

AIR SUSPENSION SEATBLADE, DUAL TILTAIR CONDITIONERDIFF STEERENGINE ENCLOSURESEROPSLIGHTINGRIPPER, MULTI SH

Machine Details:

GENERAL APPEARANCE
BumperGood
Cab or CanopyGood
FendersGood
Fuel TankGood
Grab IronsGood
HoodGood
Main Frame WeldsGood
PaintGood
Pre-Cleaner BowlGood
Steps / LadderGood
SAFETY ITEMS
ROPSYes
ROPS Certification PlateYes
Back Up AlarmGood
HornGood
Parking Brake - SAFETY ITEMSGood
GAUGES, OPERATOR STATION, CONSOLE
Air ConditionerGood
Dash ConsoleGood
GaugesGood
Glass/MirrorsGood
Seat Cushion / Arm RestGood
SwitchesGood
Windshield WipersFair - Windshield wiper is intermittent.
ENGINE
Blow ByNo
Compression in RadiatorNo
Fluid Levels OK?Yes
KnockingNo
Oil LeaksNo
Water in OilNo
Air CleanersGood
Engine SupportsGood
Fuel Injection SystemGood
Operating Condition - ENGINEGood
Turbocharger / BlowerGood
COOLING SYSTEM
Leaks - COOLING SYSTEMNo
Belts / Pulleys - COOLING SYSTEMGood
CoolersGood
FanGood
HosesGood
RadiatorGood
Water PumpGood
ELECTRICAL, STARTING AND CHARGING SYSTEM
AlternatorGood
Batteries / CablesGood
StarterGood
TRANSMISSION
Leaks - TRANSMISSIONNo
Transmission - NoisyNo
CaseGood
Controls - TRANSMISSIONGood
Operating Condition - TRANSMISSIONGood
Transmission - Forward ShiftsGood
Transmission - Reverse ShiftsGood
STEERING
Differential SteerGood
Differential Steering ControlsGood
Steering Operating ConditionGood
HYDRAULICS
Leaks - HYDRAULICSYes - Seeping cylinders but overall machine has minimal leaks.
Control Linkage - HYDRAULICSGood
Lift CylindersGood
Overall Operating ConditionGood
Tilt CylinderFair - RH is seeping.
BLADE
Cutting Edge & BitsGood
Face / MoldboardGood
PinsFair - Some play at tilt cylinder pins/ mounts.
Push ArmGood
Spill RackGood
TrunnionsGood
RIPPER / GRAPPLE / WINCH
Beam / FrameGood
Lines / Fittings - RIPPER / GRAPPLE / WINCHGood
Pins & BushingsGood
Ripper Lift CylinderFair - LH lift cylinder is seeping.
Ripper Tilt CylinderFair - LH tilt cylinder is seeping.
Shanks / GetGood
UNDERCARRIAGE
Pins & Bushings Turned?No
Track Frame - LeftGood
Track Frame - RightGood
Idlers Front
Idlers Rear
Links
Pins & Bushings (External)
Segments
Track Roller 1
Track Roller 2
Track Roller 3
Track Roller 4
Track Roller 5
Track Roller 6
Track Roller 7
Track Roller 8
FINAL DRIVES
Housings, LeftGood
Housings, RightGood
Planetaries / Differential, LeftGood
Planetaries / Differential, RightGood


Specs from the manufacturer:

Dimensions
Ground Clearance2 ft (1 m)
Height - Top of Cab13 ft (4 m)
Length of Track on Ground11 ft (3 m)
Length w/ Blade22 ft (7 m)
Length w/o Blade16 ft (5 m)
Width Over Tracks9.4 ft in (24 cm)
Engine
Displacement1,106 cu in (0 m)
Engine ModelC18 ACERT
Gross Power464 hp (346 kw)
MakeCat
ModelC18 ACERT
Net Power410 hp (306 kw)
Power Measured @1,800 rpm
Hydraulic System
Pump Flow Capacity101 gal/min (382 l/min)
Pump typePiston
Relief Valve Pressure5,875 psi
Operating Specifications
Alternator Supplied Amperage95 A
Cooling System Fluid Capacity28 gal (104 l)
Engine Oil Capacity10 gal (38 l)
Final Drives Fluid Capacity4 gal (15 l)
Fuel Capacity235 gal (889 l)
Hydraulic Fluid Capacity24 gal (89 l)
Operating Voltage24 V V
Operating Weight105,600 lbs (47,900 kg)
Standard Blade
Capacity18 cu yds (14 m)
Height7 in (17 cm)
Width14 ft (4 m)
Transmission
Max Speed - Forward7 mph (12 kph)
Max Speed - Reverse9 mph (14 kph)
Number of Forward Gears3
Number of Reverse Gears3
Transmission TypePower Shift
Undercarriage
Ground Contact Area6,569 cu in (0 m)
Ground Pressure16 psi
Number of Shoes per Side43
Number of Track Rollers per Side8
Standard Shoe Size24 in (61 cm)
Track Gauge7 ft (2 m)
Track Pitch10 in (24 cm)

Dealer Contact Info:

MacAllister Machinery Co., Inc.

Fax: 317-860-3310



Contact: Used Equipment Team

Click for Phone Number







ceg-logo ceg-logo ceg-logo ceg-logo ceg-logo