Volvo Construction Equipment has significantly updated its wheeled excavators with the launch of its new D-Series. These rugged, quality machines are highly mobile, productive and flexible — both on road and off, according to the manufacturer.
Trench digging, concrete breaking, grading, craning, hole boring — the wheeled excavator is one of the most adaptable tool carriers in construction equipment, with the additional benefit of being able to move independently between jobsites at speeds of up to 22 mph (35 kmh).
The new models available in North America consist of the EW180D and EW210D, with weights of 19.9 and 25.1 tons (18.1 and 22.8 t), respectively. The improvements in these multipurpose, flexible, fuel-efficient and comfortable models can be found in almost every significant element of the machine — new engine, cab, hydraulics, undercarriage, and access to service check points.
A Powerful Combination
The D-Series offers more powerful Tier IV interim (Tier IVi) certified Volvo engines, delivering lower emissions and enhanced fuel efficiency. Featuring Volvo V-ACT technology, these six-cylinder units produce high torque at low engine speeds. This combination gives more power and low fuel consumption, meeting the needs of both efficiency and environmental care. These engines work in fuel-efficient harmony with intelligent, advanced hydraulics and well-matched components, according to the manufacturer.
Fuel efficiency is further enhanced by the introduction of ECO mode, which has been added to the choice of work modes available. Engines also are fitted with a fuel-saving automatic idling and shutdown system. The idling system reduces the engine speed if the controls are inactive for a preset period between 3 and 20 seconds or shuts the engine off if inactive for a preset period.
The D-Series wheeled excavators are available with a mono boom and a two-piece boom providing flexibility and versatility in a wide range of applications. Increased breakout and digging forces are the result of increased hydraulic pressure, optimized hydraulic cylinders and arm / boom geometry.
A high-torque swing motor means faster cycle times when working on slopes or placing loads. The undercarriage firmly anchors the machine for digging, lifting and precise operations. A robust dozer blade and wide gauge outriggers allow the excavators to lift, load or grade as required. To improve machine stability, the new D-Series features optional increased counterweights from the C-Series models they replace.
See More, Do More
The new D-Series is fitted with a rear view camera as standard, displayed via a color monitor in the cab. An optional side view camera also is available. These features of the spacious ROPS-certified cab fitted to these new machines offer all-around visibility. Digging, lifting or craning, the operator has a clean line of sight for machine maneuvering with ergonomic and easy-to-use controls.
With ample foot room and storage space, the cab offers comfort and convenience, while reducing operator fatigue. The cab features automatic climate control, which is standard, and delivers cool or warm filtered air through 14 vents for increased comfort. Operator convenience is further increased, due to a slim, adjustable and unobtrusive steering column and a clear, bright and easy-to-read display delivering important diagnostic and machine performance information. Adjustable seat, pedals and joystick offer the perfect operating position.
The enhanced suspension system reduces operator fatigue and whole body vibration. In-cab noise levels also are reduced, due to the low revving engine and the pressurized insulated cab. The attention to detail continues outside the cab: LED lights on the rear counterweight are bright and fast-acting, as well as having a longer service life over traditional bulbs. All steps and platforms feature punched steel plates for superior grip, even in wet or icy conditions.
Productivity also is enhanced as the operator can infinitely adjust flow and pressure to suit the particular attachment fitted without leaving the seat. Easy tool changing also is possible. The EW180D and EW210D can work with three types of quick couplers (S-1, S-6 or Universal). Daily inspections of engine oil, coolant, hydraulic oil and filters can be done via the easy-to-read, in-cab control monitor.
The standard Volvo CareTrack telematics system conducts a self-diagnostic routine, alerting the operator and fleet manager when a fault code occurs. CareTrack also offers a range of other important information, including fuel consumption, machine location and maintenance schedule.
Maintaining Standards
Serviceability is built into the new wheeled excavators from Volvo. Grouped, ground level access via large wide-opening doors makes inspection and service convenient and straightforward. Centralized lubrication points, accessible radiators and long service intervals reduce downtime.
An optional auto greasing system also will supply the correct amount of lubricant to all greasing points on a timed basis. Offering mobility, ease of use, comfort, safety and adaptability, the D-Series wheeled excavators from Volvo Construction Equipment offer more and less — more tools, more tasks, more comfort and more control — all while using less fuel and less time.
For more information, call 828/650-2000 or visit www.volvo.com.
Today's top stories
