IROCK Conveyors Deliver High Capacities, Durability
Wheeled units are road portable and can be hauled to different locations or relocated on site with the help of a truck.
📅 Mon May 18, 2015 - National Edition
The tracked T-8048 conveyor features a 48-in. (122 cm)-wide belt and stretches 80 ft. (24 m) long, and it can stockpile material up to 33 ft. 2 in. (10 m) for more stacking before relocation.
Tracked and wheeled conveyors from IROCK Crushers pair with crushing and screening systems for operation at maximum capacity and years of reliable service, according to the manufacturer.
Wheeled units are road portable and can be hauled to different locations or relocated on site with the help of a truck. The tracked units make maneuvering around a job site easy as they can move under their own power. They can be folded and loaded onto trailers for relocation from site to site.
IROCK builds the high-capacity conveyors with heavy-duty components and channel frames for durability and longevity. The units stockpile to heights more than 33 ft. (10 m) and are used in sand and gravel, topsoil, coal, crushed stone and recycling applications.
The tracked T-8048 conveyor features a 48-in. (122 cm)-wide belt and stretches 80 ft. (24 m) long, and it can stockpile material up to 33 ft. 2 in. (10 m) for more stacking before relocation. With the hydraulically adjustable tail section, operators can reduce the drop height of material onto the conveyor to lessen wear and minimize spillage. The T-8048 comes standard with a Deutz TD Tier III engine. This thermostatically controlled unit comes standard with hydraulic oil cooler to further prevent overheating.
IROCK’s wheeled M-5030, the M-6030 and M-8036 units feature a fifth wheel pin with a radial plate for 180-degree rotation. With its ability to stack in an arc, these units allow for optimal stockpiling capability and boost the efficiency of operations by reducing frequent material handling. A large receiving hopper reduces spillage and pairs well with larger screening and crushing plants.
The M-5030 features a 10-hp electric motor and a 30-in. (76 cm)-wide, 50-ft. (15 m)-long conveyor that stockpiles to 22 ft. (6.7 m). The M-6030 has a 10-hp electric motor and a 30-in.-wide, 60-ft. (18 m) conveyor that can stockpile to 24.5 ft. (7.4 m). Finally, the M-8036 features a Cat C2.2 engine rated at 50-hp, and its 36-in. (91 cm)-wide, 80-ft. (24 m) conveyor can stockpile to 30 ft. (9 m).
Options for the wheeled conveyors include diesel hydraulic power pack, hydraulic raise and lower, brakes, light package, power travel and chevron belting.
For more information, call 866/240-0201 or visit www.irockcrushers.com.