List and Sell Your Equipment  /  Dealer Login  /  Create Account

2010 Caterpillar 775F For Sale in Indianapolis, IN



For Sale: $265,000.00 USD

Apply for Financing

Machine Info:

Hours:26666
Serial Number:DLS01111
Machine Location:INDIANAPOLIS, IN 46219

Description:

AM FM RADIOAUTO LUBEBODY LINERLIGHTINGSTARTER, ELECTRICAIR CONDITIONER

Machine Details:

GENERAL CONDITION
ET Download AvailableYes
Machine Starts and is OperableYes
Tires are Aired Up and DrivableYes
BodyGood
Frame - GENERAL CONDITIONGood
GeneralGood
GENERAL APPEARANCE
A-Frame RAXGood
BumperPoor - Ends are dented.
Cab Overall ConditionGood
Differential SupportsGood
FendersGood
Frame - GENERAL APPEARANCEGood
Fuel TankGood
Grab IronsGood
Hydraulic TankGood
Main Frame WeldsGood
PaintGood
Radiator Grill & ShroudGood
Steps / LadderGood
SAFETY ITEMS
Back Up Alarm FunctioningYes
Brakes FunctioningYes
ROPSYes
Glass / MirrorsGood
HornGood
Parking Brake - SAFETY ITEMSGood
ROPSGood
Seat Belt - SAFETY ITEMSPoor - Expired. (replacing.)
GAUGES, OPERATOR STATION, CONSOLE
Back Up AlarmYes
ROPS Certification PlateYes
Air ConditionerGood
Dash ConsoleGood
Door Latches & HingesGood
Floor BoardsGood
Floor MatsGood
GaugesGood
Glass/MirrorsGood
HeaterGood
Seat Belt - GAUGES, OPERATOR STATION, CONSOLEPoor
Seat Cushion / Arm RestGood
SwitchesGood
Windshield WipersGood
ENGINE
Apparent Other Engine DamageNo
Blow ByNo
Compression in RadiatorNo
Engine Oil Level FullYes
Fluid Levels OK?Yes
Fuel LeaksNo
KnockingNo
Oil LeaksYes - Leak in oil cooler area.
Water in OilNo
Air CleanersFair - Dirty (Replacing.)
Belts / Pulleys - ENGINEGood
Engine SupportsGood
Exhaust / MufflerPoor - Tip is damaged and elbow is rusted through.
Fuel Injection SystemGood
Fuel SystemGood
Operating Condition - ENGINEGood
TurbochargerGood
COOLING SYSTEM
Leaks - COOLING SYSTEMNo
Oil in Anti-FreezeNo
Belts / Pulleys - COOLING SYSTEMGood
CoolersGood
FanGood
RadiatorGood
Water PumpGood
ELECTRICAL, STARTING AND CHARGING SYSTEM
AlternatorGood
Batteries / CablesPoor - Machine had to be jump started.
LightingGood
StarterGood
TORQUE CONVERTER
Torque Converter - TORQUE CONVERTERGood
TRANSMISSION
Leaks - TRANSMISSIONNo
Transmission - NoisyNo
CaseGood
Controls - TRANSMISSIONGood
Operating Condition - TRANSMISSIONGood
TransmissionGood
Transmission - Forward ShiftsGood
Transmission - Reverse ShiftsGood
Universal Joints - TRANSMISSIONGood
STEERING
AccumulatorsFair - Leak in accumulator area.
Arm Center (Steering Linkage)Good
Pivot P & B TrunnionsGood
Steering CylinderFair - Lines leaking at RH cylinder.
Steering LinkageGood
Steering TankGood
Tie Rods / Rod EndsGood
BRAKE
Control ValveGood
Parking Brake - BRAKEGood
Pump - BRAKEGood
AXLE ASSEMBLIES
Axle HousingGood
Differential - AXLE ASSEMBLIESGood
Left Final DriveFair - Cover is leaking.
Right Final DriveGood
Wheel Lugs & Rims - AXLE ASSEMBLIESGood
TRUCK BODY & CYLINDERS
Bed Liner - TRUCK BODY & CYLINDERSPoor
Body CanopyGood
Body FloorGood
Body Side WallsGood
External Ribs and StringersGood
Hinge Pins and BushingsGood
Mounting BracketsGood
Pads - TRUCK BODY & CYLINDERSFair
Rock Kickers / Flaps - TRUCK BODY & CYLINDERSGood
HYDRAULICS
Leaks - HYDRAULICSNo
Lift Cylinders - HYDRAULICSPoor - RH lift cylinder upper bearing is gone. (Repairing.)
Overall Operating ConditionGood
Pump - HYDRAULICSGood
TankGood
FINAL DRIVES
Differential - FINAL DRIVESGood
Rear AxleGood
Rear Final DrivesFair - LH cover is leaking.
Wheel Lugs & Rims - FINAL DRIVESGood
TIRES
Tire Size - TIRES - 24.00R35
Left Front
Left Rear
Left Rear Inside
Right Front
Right Rear
Right Rear Inside
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
comment 1 - Multiple broken grease lines throughout.


Specs from the manufacturer:

Approximate Weights - Dual Slope
Body29,877 lbs (13,552 kg)
Gross Weight - Empty154,000 lbs (69,854 kg)
Approximate Weights - Flat Floor
Body29,665 lbs (13,456 kg)
Chassis35 lbs (16 kg)
Articulating/Rigid
Articulating/Rigid Rigid
Body Hoists
Body Lower Time - Float13 sec
Body Power Down - High Idle31 °
Body Raise Time - High Idle10 sec
Pump Flow - High Idle148 gal/min (560 l/min)
Relief Valve Setting - Lower43 psi
Relief Valve Setting - Raise2,750 psi
Brakes
Brake Standards15
Brake Surface - Front216 cu in (0 m)
Brake Surface - Rear9,497 cu in (0 m)
Standards3.64:1
Capacity - Dual Slope - 100% Fill Factor
Heaped 2:1 (SAE)56 cu yds (43 m)
Struck56 cu yds (43 m)
Capacity - Flat Floor - 100% Fill Factor
Heaped 2:1 (SAE)55 cu yds (42 m)
Struck55 cu yds (42 m)
Dimensions
Centerline Front Tire Width11 ft (3 m)
Centerline of Rear Dual Tire Width9 ft (3 m)
Dump Clearance2 ft (1 m)
Dump Ground Clearance2 ft (1 m)
Dump Height31 ft (9 m)
Engine Guard Clearance13 ft (4 m)
Front Canopy Height15 ft (4 m)
Ground Clearance3 ft (1 m)
Height - Top of ROPS/FOPS7 ft (2 m)
Inside Body Depth - Maximum16 ft (5 m)
Inside Body Length20 ft (6 m)
Inside Body Width2 ft (1 m)
Loading Height - Empty13 ft (4 m)
Operating Width17 ft (5 m)
Outside Body Width14 ft (4 m)
Overall Body Length14 ft (4 m)
Overall Canopy Width500 ft (152 m)
Overall Height15 ft (4 m)
Overall Height - Body Raised31 ft (9 m)
Overall Length34 ft (10 m)
Overall Tire Width15 ft (4 m)
Overall Width18 ft (5 m)
Rear Axle - Clearance9 ft (3 m)
Rear Axle - Tail2 ft (1 m)
Wheel Base14 ft (4 m)
Wheelbase14 ft (4 m)
DRIVE SYSTEM
Drive Config 4x2
Dump
Dump Angle2,000
Load Capacity - heaped55 cu yds (42 m)
Load Capacity - Struck42 cu yds (32 m)
Lower Time13 sec
Raise Time10 sec
Rated Payload140,000 lbs (63,504 kg)
Engine
AspirationTurbocharged
Bore5 in (14 cm)
Displacement1,649 cu in (0 m)
Engine ModelCat C27 ACERT
Flywheel Power740 hp (552 kw)
Gross Power787 hp (587 kw)
Gross Power - SAE J1995787 hp (587 kw)
MakeCat
Max Torque2,582 lbs/ft
ModelC27 ACERT
Net Power740 hp (552 kw)
Net Power - 80/1269/EEC740 hp (552 kw)
Net Power - Cat740 hp (552 kw)
Net Power - ISO 9249740 hp (552 kw)
Net Power - SAE J1349740 hp (552 kw)
Number of Cylinders12
Peak Torque2,582 lbs/ft
Power Measured @2,000 rpm
Rated Engine Speed2,000 rpm
Stroke6 in (15 cm)
Torque Measured @Turbocharged rpm
Final Drives
Differential Ratio17.49:1
Planetary Ratio4.80:1
Total Reduction Ratio17.49:1
Operating Specifications
Alternator Supplied AmperageGear
Body Capacity - SAE 2:155 cu yds (42 m)
Brake/Hoist System Fluid Capacity81 gal (307 l)
Cooling System Fluid Capacity46 gal (174 l)
Diff and Final Drive Fluid Capacity41 gal (155 l)
Engine Oil Capacity19 gal (72 l)
Fuel Capacity185 gal (700 l)
Hydraulic System Fluid Capacity19 gal (72 l)
Lower Time13 sec
Maximum Capacity140,000 lbs (63,504 kg)
Maximum Working Payload (110%)154,000 lbs (69,854 kg)
Nominal Payload Capacity41 lbs (19 kg)
Nominal Payload Class (100%)140,000 lbs (63,504 kg)
Not to Exceed Payload (120%)*168,000 lbs (76,204 kg)
Raise Time10 sec
Steer Angle77 °
Steering System Fluid Capacity16 gal (61 l)
Tire Size24.00R35(E4)
Top Speed - Loaded42 mph (67 kph)
ROPS
ROPS StandardsANSI/SAE J1166 MAY90.
ROPS/FOPS StandardsISO 3471:1994 ISO 3449:1992 Level II
Service Refill Capacities
Brake / Hoist / Fan Hydraulic Tank35 gal (132 l)
Brake Hoist System - Includes Tank81 gal (307 l)
Brake/Hoist Hydraulic Tank140,000 gal (529,900 l)
Cooling System46 gal (174 l)
Crankcase25 gal (95 l)
Differential - Final Drives25 gal (95 l)
Fuel Tank185 gal (700 l)
Steering System - Including Tank16 gal (61 l)
Steering Tank9 gal (34 l)
Torque Converter - Transmission System - Including Sump19 gal (72 l)
Sound
Sound StandardsANSI/SAE J1166 MAY90.
Steering System
Steer Angle31 °
Steering StandardsSAE J1511 OCT90, ISO 5010: 1992
Turning Circle - Clearance Diameter86 ft (26 m)
Suspension
Effective Cylinder Stroke - Front6 in (15 cm)
Effective Cylinder Stroke - Rear6 in (15 cm)
Rear axle - Oscillation9 °
Tires
Standard Tire24.00R35 (E4)
Standard Tires216
Transmission
Forward - 17 mph (11 kph)
Forward - 29 mph (15 kph)
Forward - 313 mph (20 kph)
Forward - 417 mph (27 kph)
Forward - 523 mph (37 kph)
Forward - 631 mph (50 kph)
Forward - 742 mph (67 kph)
Max Speed42 mph (67 kph)
Number of Gears - Forward7
Number of Gears - Reverse1
Reverse9 mph (14 kph)
Transmission Type14
Weights
Empty Weight105,831 lbs (48,004 kg)
Front Axle - Empty49%
Front Axle - Loaded33%
Loaded Weight242,001 lbs (109,771 kg)
Operating Weight 42,000 lbs (19,051 kg)
Operating Weight - LoadedSAE J1511 OCT90, ISO 5010: 1992 lbs (0 kg)
Rear Axle - Empty51%
Rear Axle - Loaded67%
Weight Distribution Front - empty49%
Weight Distribution Front - loaded33%
Weight Distribution Rear - empty51%
Weight Distribution Rear - loaded67%

Dealer Contact Info:

MacAllister Machinery Co., Inc.

Fax: 317-860-3310



Contact: Used Equipment Team

Click for Phone Number







ceg-logo ceg-logo ceg-logo ceg-logo ceg-logo